BATH REPAIR ADDLESTONE

Specialist Bath Resurfacing & Chip Repair for Addlestone & Runnymede Properties

Call Us
01342 349937
Free Quote Request

About Bath Fixer Addlestone

Bath Fixer Addlestone provide professional bath repair, resurfacing, and enamel restoration across Addlestone and the wider Runnymede borough. From single chip repairs on acrylic baths through to complete enamel restoration on ageing pressed steel tubs, our specialist technicians deliver a durable, factory-quality finish that avoids the expense and upheaval of a full bath replacement.

Every job starts with a hands-on assessment of the damage and the bath material. Addlestone's housing stock spans several construction eras, and the bathrooms within those properties vary just as widely. A 1930s semi-detached on Crouch Oak Lane will typically contain a pressed steel bath with decades of enamel wear, while a newer apartment near Addlestone One may have an acrylic panel bath with impact cracks or surface scratches. Bath Fixer Addlestone tailor the repair approach to suit the specific material and condition we find on site.

The core of our method is a two-stage bonding system that most competitors do not offer. After thorough surface preparation, we apply two separate bonding agents cured with a hot air gun before the final enamel coat is sprayed and set using our infrared low-bake system. This dual primer process creates a significantly stronger adhesion between the new surface and the original bath, producing a finish that resists chipping, peeling, and discolouration far longer than single-primer alternatives.

Beyond baths, Bath Fixer Addlestone also repair sinks, basins, shower trays, ceramic tiles, granite worktops, uPVC door panels, and solid surface fixtures. If a hard surface in your property is chipped, cracked, stained, or worn, we can almost certainly restore it at a fraction of the cost of replacement.

Nearby Areas We Serve: The bathroom repair challenges we see in Addlestone are common across neighbouring towns too. Homeowners in Weybridge and Chertsey face similar issues with worn enamel, impact damage, and ageing fixtures. See our area-specific guides for detailed local information.

Professional Bath Resurfacing by Bath Fixer Addlestone

Quality Guaranteed

Bath Fixer Addlestone use a proprietary two-stage bonding system that delivers a stronger, longer-lasting finish than standard single-primer methods.

Dual Bonding
Two-stage primer system
Written Guarantee
Every repair backed

Our Services in Addlestone

What Bath Fixer Addlestone deliver for homeowners, landlords, and letting agents across the Runnymede borough

3,000+

Bath Repairs Completed

97%

Client Satisfaction Rate

12+

Years of Local Experience

Precision Colour Matching

Our Addlestone technicians blend colours on site to replicate the precise shade of your existing bath surface. Whether the original white has yellowed over decades or the bath carries an unusual manufacturer tint, the repaired section merges invisibly with the surrounding finish.

Completed in a Single Visit

Chip repairs typically take under two hours. A full bath resurface is finished within four to six hours on site, and the bath can be used carefully again the following day. No multi-day disruption, no plumber required, no mess left behind.

Durable, Guaranteed Finish

Our two-stage bonding agent system combined with infrared curing produces an exceptionally hard-wearing surface. Every repair is backed by a written guarantee, giving Addlestone customers confidence that the finish will perform for years rather than months.

Trained Surface Specialists

Bath Fixer Addlestone technicians are fully trained across enamel, acrylic, pressed steel, stone resin, fibreglass, shower trays, basins, worktops, and uPVC surfaces. We carry full public liability insurance for every appointment.

Why Addlestone Homeowners Choose Bath Fixer

Addlestone sits within the Runnymede borough of north Surrey, and its residential streets reflect well over a century of housebuilding. Victorian cottages along the older lanes near Crouch Oak give way to the substantial 1920s and 1930s semi-detached estates that make up much of the town, followed by the post-war council-built housing of the 1950s and 1960s around the Row Town and Simplemarsh Road areas, and the modern apartment complexes and new-build developments clustered around the regenerated town centre and Addlestone One.

Each era installed different bathroom fixtures. The inter-war properties typically contain pressed steel baths with vitreous enamel coatings that have become brittle and prone to chipping after decades of use. Post-war homes often have heavier gauge steel baths with thicker enamel, but these are still vulnerable to rust where the surface has been penetrated by impact or abrasive cleaning. The newer builds and bathroom renovations fitted from the 1990s onwards tend to use acrylic or fibreglass baths, which are lighter but susceptible to cracks from impact, scratches from abrasive cleaners, and stress fractures at the edges where weight concentrates.

Bath Fixer Addlestone understand these differences because we work with them every day. We assess each surface individually and select the correct preparation, bonding, and finishing technique for the material in front of us. That targeted approach is the reason our repairs hold up where generic methods fail.

What We Repair

  • Enamel & acrylic bath resurfacing
  • Chip & crack repair
  • Shower tray restoration
  • Basin & sink repairs
  • Granite worktop repair
  • uPVC door & frame restoration
  • Cabinet & furniture repair
  • Laminate & veneer restoration

Recent Bath Repairs in Addlestone

Real examples of restoration work completed by Bath Fixer across Addlestone and the Runnymede area

1930s Pressed Steel Bath – Crouch Oak Lane

Addlestone, KT15
The Challenge

A retired couple in a well-maintained 1930s semi-detached home had been putting off dealing with their bathroom for years. The original pressed steel bath had lost its gloss entirely, with a network of fine surface cracks across the base, several deep chips near the overflow, and a persistent rust stain spreading from a worn patch beneath the taps. A local bathroom fitter quoted over £2,400 for removal, new bath supply, plumbing reconnection, and tile repair.

Our Solution

Bath Fixer Addlestone treated the corroded area with a specialist rust inhibitor, rebuilt the chipped sections using a high-adhesion filler compound, and prepared the full surface for recoating. Our dual bonding agent was applied in two stages and heat-cured, followed by two coats of colour-matched enamel sprayed and cured with our infrared system. The perimeter was resealed to complete the job.

The Result

The bath was restored to a smooth, bright, even finish with no visible trace of the previous damage. The couple saved over £1,900 compared to the replacement quote and avoided a disruptive multi-day bathroom refit. The entire job was completed in a single visit with a written guarantee.

Acrylic Bath Crack – Town Centre Apartment

Addlestone, KT15
The Challenge

A landlord managing a rental apartment close to Addlestone station discovered a deep crack and several surrounding stress fractures in the acrylic bath during a routine inspection between tenancies. The damage appeared to have been caused by a heavy object being dropped into the tub. Replacing the bath would have required disconnecting plumbing, cutting into the tiled surround, and delaying the next tenancy by at least a week.

Our Solution

We stabilised the stress fractures to halt any further spread, filled the main crack with a structural compound designed for acrylic surfaces, and blended the repair area level with the surrounding bath wall. The patched section was colour-matched to the existing white finish and sealed with a protective topcoat cured on site.

The Result

The repair was completed within three hours. The landlord was able to proceed with the incoming tenancy on schedule, and the bath showed no sign of the previous damage. The total cost was a fraction of a full replacement, and the repair carries a written guarantee from Bath Fixer.

Our Bath Resurfacing Process

A step-by-step look at how Bath Fixer Addlestone restore your bath to a factory-quality finish

1
Room Protection

Dust sheets are laid across the floor, WC, basin, and radiator. Old sealant is stripped from the bath perimeter. All surrounding surfaces are fully protected before any repair work begins.

2
Deep Cleaning & Repair

The bath is cleaned with specialist agents to remove all residue. Chips, cracks, abrasions, rust spots, and mineral deposits are repaired individually. Any structural weakness is addressed at this stage.

3
Masking & Degreasing

Tiles, taps, drain fittings, overflow, and walls are carefully masked. A professional-grade degreaser is applied to eliminate any remaining contaminants from the bath surface ahead of bonding.

4
Dual Bonding Agent

The first bonding agent is applied and heat-cured, then reinforced with a second primer at high temperature. This two-stage process – exclusive to Bath Fixer – creates an ultra-durable bond between the new coat and the original bath surface.

5
Enamel Spray & Curing

The new enamel surface is professionally sprayed and hardened using our infrared low-bake curing system. This accelerates the bonding reaction and produces a smooth, dense, chip-resistant finish.

6
Polish, Seal & Inspect

The finished surface is polished to a high sheen, all masking is removed, and a waterproof sealant is applied around the bath perimeter. A final inspection confirms the repair meets Bath Fixer standards before sign-off.

What Our Addlestone Clients Say

Feedback from homeowners and landlords who have used Bath Fixer in the Addlestone area

Karen M.
Addlestone – 03/02/2025

"Fantastic work from start to finish. Ilia arrived on time, explained what he would be doing and got straight to work. The bath had deep chips near the plug hole and looked dreadful. Now it looks absolutely brand new. Very impressed with Bath Fixer."

James R.
Addlestone – 19/11/2024

"We had an old pressed steel bath that was badly stained and chipped. Alex resurfaced the entire thing and the finish is incredible. Smooth, bright, no trace of the old damage. Would not hesitate to recommend Bath Fixer to anyone in the Addlestone area."

Linda P.
New Haw – 14/08/2024

"Called Bath Fixer after a tile fell and cracked our acrylic bath. Ilia came out within a few days and the repair is invisible. Brilliant service and very reasonable pricing. We will definitely use them again for any future surface repairs."

Google Reviews - Bath Fixer Addlestone Trustpilot Reviews - Bath Fixer Addlestone

Bath Repair Pricing – Addlestone Specialists

Clear, upfront pricing from Bath Fixer Addlestone – select the service level that fits your repair

Bath Fixer Addlestone offer three tiers of service to cover everything from a single chip to a complete bathroom suite refinish. Every job uses the same professional-grade materials and dual bonding system. The difference between tiers reflects the scope of work rather than the quality of finish. Choose the option that matches your situation.

Chip & Crack Repair

From

£95
per repair

Individual chip or crack repair on any bath surface

  • Single chip or crack repair
  • Professional colour matching
  • Surface preparation & priming
  • Finished in a single visit
  • Written guarantee included
Get a Quote
Most Popular

Full Bath Resurfacing

From

£355
per bath

Complete bath resurfacing with dual bonding system

  • Full surface preparation
  • All chips & cracks repaired
  • Dual bonding agent system
  • Professional enamel spray
  • Infrared curing & polishing
  • Waterproof sealant finish
  • Written guarantee included
Book Now

Full Bathroom Suite

From

£585
bath + basin + tiles

Complete bathroom refinishing for a full transformation

  • Everything in Full Resurfacing
  • Basin & pedestal resurfacing
  • Tile surface refinishing
  • Colour change available
  • Priority scheduling
  • Extended written guarantee
Book Now

Frequently Asked Questions – Bath Repair Addlestone

Common questions answered by Bath Fixer Addlestone

Professional resurfacing typically costs between forty and seventy per cent less than a full bath replacement. Beyond the price of the new bath itself, replacement involves plumber fees, disconnection, tiling repairs, waste disposal, and often redecoration. Resurfacing avoids all of that disruption and restores your existing bath to a factory-fresh finish in a single visit.

Yes. We carry out individual chip and scratch repairs every week across Addlestone and the surrounding Surrey towns. A dropped showerhead, a falling tile, or a heavy bottle can cause localised damage that does not require a full resurface. We colour-match the repair to your existing finish so the mended area blends in completely.

Bath Fixer Addlestone work on every common bath material including cast iron, pressed steel, acrylic, fibreglass, stone resin, and solid surface. Each material requires a different preparation and bonding technique, and our technicians are trained to adapt their method to the specific surface they are working on.

The bath is ready for careful use within twenty-four hours and fully cured within forty-eight hours of the work being completed. Our infrared curing system accelerates the hardening process so the new surface reaches its full durability faster than traditional air-dried coatings.

We cover the whole of Addlestone and the wider Runnymede borough. Our regular service area includes Addlestone, New Haw, Row Town, Weybridge, Chertsey, Ottershaw, Byfleet, and Woodham. We also attend properties in neighbouring towns such as Woking, Walton-on-Thames, and Shepperton.

Every bath repair and resurfacing job completed by Bath Fixer carries a written guarantee. Our dual bonding agent system creates a far stronger adhesion than the single-primer approach used by most competitors. This two-stage process is the foundation of our guarantee and the reason our repairs last for years.

Have another question? Contact Bath Fixer Addlestone directly.

Areas We Cover in & Around Addlestone

Bath Fixer provide professional bath repair and resurfacing across Addlestone and the wider Runnymede borough

Addlestone & Row Town

The residential streets around Addlestone town centre and Row Town include inter-war semi-detached homes, 1950s council housing, Victorian cottages near the Crouch Oak, and modern developments around Addlestone One. Bath repairs span pressed steel enamel restoration, acrylic crack repair, and full resurfacing on every material.

Book in Addlestone
New Haw & Woodham

New Haw and Woodham sit immediately south of Addlestone with a mix of 1930s semis, post-war estates, and modern infill development. Bathroom fixtures in these properties range from original steel baths to newer acrylic installations, and repair requests cover chipping, staining, and surface wear.

Bath Repair New Haw
Weybridge

One mile east of Addlestone, Weybridge is characterised by larger detached and semi-detached homes from the Edwardian and inter-war periods, many with original bathroom suites still in place. Cast iron bath restoration, enamel chip repair, and full resurfacing are the most common jobs we carry out here.

Bath Repair Weybridge
Chertsey

Directly north of Addlestone, Chertsey has a broad range of housing from medieval cottages in the town centre to large post-war estates and new-build developments. The variety of property ages produces an equally varied demand for bath repair across enamel, acrylic, and steel surfaces.

Bath Repair Chertsey
Ottershaw & Byfleet

The quieter villages of Ottershaw and Byfleet to the south and south-east of Addlestone feature a blend of period properties and 1960s-70s housing. Pressed steel baths with worn enamel and acrylic baths with surface scratches are the most frequent repair requests from these areas.

Bath Repair Byfleet
Surrounding Areas

Bath Fixer operate across the wider Runnymede borough and into neighbouring Surrey districts. We regularly attend properties in the surrounding towns that share similar housing stock and bath repair needs.

Professional Bath Repair Addlestone, Surrey

Bath Fixer Addlestone deliver the professional bath repair and resurfacing service that Runnymede property owners depend on. Whether the job is a minor chip repair, a complete bath resurface, or a full bathroom suite refinish, our trained specialists produce a factory-quality result backed by a written guarantee.

Every repair carried out by Bath Fixer Addlestone uses our proprietary dual bonding system and infrared curing process. We apply the same professional methodology to every job, regardless of size. No consumer-grade materials, no shortcuts, and no compromises on finish quality.

Call us today or complete the form below to arrange your free, no-obligation quote.

01342 349937 Request a Quote

FREE Quote Request Form

Contact Details

Phone
01342 349937
Business Hours
Monday – Friday: 8:00 AM – 6:00 PM

Need Immediate Assistance?

For urgent bath repair needs in Addlestone, call Bath Fixer directly.

Call Now
CallCall Now QuoteFREE Quote