Bath Resurfacing Alton, Hampshire

Need Bath Repair Service in Alton, GU34?

Call us
01342 349937
Quote Request Form

Affordable Sink Chip Repair Alton

From minor imperfections to a heavily scratched or cracked bath, the professionals at Bath Fixer Alton provide a full surface restoration for baths, showers, and sinks and restore your bath, sink, or shower through a affordable option to extend the life of your bath.

Bathroom fixtures like basins, bathtubs, and shower trays commonly experience impact damage from accidental impacts. Such incidents can leave noticeable damage, but that doesn’t mean you need a full replacement.

Call us
01342 349937
How it works
Bath Restoration Credentials Alton
Goole Reviewath Repair Services in Alton Trustpilot Review- Bath Resurfacing in Alton

Expert Shower Trays Repair in Hampshire

With extensive experience in hard surface restoration, we specialize in:

  • Shower Trays Repair
  • Wood Flooring Repair
  • Kitchen Sinks Repair
  • Laminate & Veneer Repair
  • Wooden Frames Repair

What Sets Bath Fixer Apart?

Bath Fixer technicians are trained to deliver expert specialized refinishing work on doors, floors, solid and laminate worktops, enamel and acrylic tubs, shower trays, ceramic and porcelain tiles, window frames and cills, wood and composite furniture, and a wide range of other surfaces throughout GU34.

Bath Resurfacing Hampshire

  • Traditional enamel bathtubs gradually turn rough and difficult to clean due to wear and tear.

    At this point, it’s time for Bath Fixer Alton’s specialists to apply our enamel restoration treatment.

    Fiberglass or acrylic baths over time lose their original shine, which can make your entire bathroom appear outdated.

    Be it an an enamel bathtub refinishing or a full resurfacing for an acrylic fixture, the resurfacing experts at Bath Fixer Alton, your refreshed and revitalized bath is ensured to stay pristine for years to come.
  • Bath Fixer Alton experts are able to revive the aesthetics of your bathtub for much less than replacement with our specialized bath resurfacing and repair service.

    Refinishing offers the most cost-effective way for any type of bathtub, whether it's acrylic and enamel-finished tubs to cast iron and fibreglass.

    The technique we use is suitable for any bath type, allowing us to carry out work across different bath styles.

    Be it repairing acrylic bathtubs to restoring old cast iron baths, the completed work will have your aged tub looking spotless and refreshed.

    Our bath repair and resurfacing service in Hampshire have allowed property owners reduce expenses by more than 60% by avoiding a full bathtub installation.

    Using our refinishing process, we eliminate surface damage and blemishes, and add a durable refinishing layer for an flawless, showroom-quality result.

Professional Shower Tray Reglazing Alton

People frequently select shower trays for their cost-effectiveness and space-saving design, offering a efficient solution for bathroom design.

Yet with frequent use, daily use can cause visible damage, giving them a dull and tired look and challenging to keep in good condition.

This is where the expertise of Bath Fixer Alton comes into play, saving you from the cost and inconvenience of buying an entirely new shower tray.

The skilled professionals at Alton focus on offering high-quality and dependable repairs, making sure your shower base regain their original shine.

No matter the level of wear and tear, our specialists use professional-grade materials to tackle any issue, giving your shower a smooth, refreshed appearance.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

FREE Quote Request Form

Acrylic Tub Repair in Alton

The experts at Bath Fixer Hampshire are experts in acrylic bathtub restoration, shower tray refinishing, chip and crack repair for sinks, bath re-enamelling, and damage repair for solid surfaces.

Acrylic bathtubs have a softer surface and can be affected from accidents during bathroom renovations. It’s not uncommon for a shower screen to slip and leave a deep mark. The bath’s edge can be split if undue force is exerted or is stressed when adjusting surrounding tiles. Often, an bathtub suffers nicks and scratches while stored.

No matter the damage, we will probably be able to repair it.

Call us, or complete our online contact form, or send us pictures via WhatsApp or SMS, and we’ll assess the damage.

Complete Guide to Bath Re-Enamelling and Resurfacing

As the first step, we dust sheet the flooring, commode, basin, heating units, and all large surface areas.

We thoroughly clean the bath with specific cleaners and strip away moldy or damaged silicone.

Our experts fix all types of damage, ranging from minor cracks and chipped enamel, abrasions, hard water stains, and deteriorated enamel due to water exposure. If the base of your bath has cracks or holes, we reinforce and fix it completely.

Our team carefully protects the wall tiles, vertical surfaces, bathroom fixtures, waste, and bath overflow with specialized covering materials to avoid any coating residue.

Our team applies a professional-grade cleaning agent to get rid of grimy deposits, surface contaminants, impurities and stains.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

Following that, we coat the surface with the second bonding agent using high-temperature application.In contrast to many resurfacing services, we apply an extra adhesion layer, ensuring that the new enamel coating forms an ultra-durable bond.

We apply an infrared low-bake system to harden and set the fresh enamel coating and clear away all masking materials.

Following this, we apply expert refinements, ensuring a flawless, mirror-like finish to make sure it’s perfect.

As a finishing step, we seal with a protective waterproof sealant so the surface is watertight and secure.

Granite Worktop Chip Repair Alton, Hampshire

Granite worktops may sustain chips at the corners, because this area lacks structural support.

The material is not supported on the open edge, and a forceful hit from cookware may cause a small section to break away.

  • Surface Staining and Fading Even though they are highly durable, various harsh products might result in deep-set stains on these surfaces.
  • Scratches and Dents Accidental cuts, forceful blows, or daily use can result in light surface marks or small depressions on the worktop.
  • Surface Chips Perimeter sections, if hit with force, could break off slightly, compromising the worktop’s seamless look.

Don’t Wait, Repair Your Worktop Now! — Get in Touch!

Get in touch with the Hampshire specialists for affordable service and professional guidance.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in Hampshire rave about our expert bath repair and bath resurfacing services.

Good communication:

Kept me informed and arrived as scheduled. Alex made sure I understood the process before starting. He took great care in masking everything up and worked very hard. He cleaned up thoroughly, and we’re thrilled with the outcome—the bath looks fantastic! - David E, Hampshire

Very Professional

Ilia did an amazing job — was prompt, professional, and left everything spotless. I strongly recommend Ilia and the Bath Fixer team —Sarah W., Hampshire, Alton

Timely and Transparent

Outstanding service. Phoned on Monday & Ilia arrived on Wednesday at the appointed time to repair 2 holes in acrylic bath. The process was seamless, with friendly and efficient service. You can’t even tell there was damage—the colour match is perfect! No hesitation in recommending Bath Fixer and their brilliant service. — Trent D., Hampshire

High-Quality uPVC Door Repairs
Here at Bath Fixer Alton, we recognize the value of maintaining the appearance and functionality of your plastic doors.

Our detailed restoration method utilizes colour and texture matching, making the restoration undetectable with the rest of the surface.

We remove debris and smooth out the flaws, meticulously filling and smoothing imperfections.

Handling both light blemishes and major breaks, our specialized knowledge offers an affordable, eco-friendly, and hassle-free solution to full door replacement.

Top FAQs About What We Offer

Bath resurfacing can frequently save you approximately 60% on the cost of installing a new bathtub.

Sure, you could replace your enamel bath for a cheaper acrylic alternative, but you will be losing an highly desirable bathtub for a much lower-quality and less desirable bath.

Absolutely. Our material is formulated to adhere to baths, washbasins, sink pedestals, and even ceramic surfaces.

That being said, we suggest that the lavatory is changed, this is due to the way toilets are cleaned. Frequent scrubbing and disinfectants will damage the coating material over time.

You have the option to refinish your entire suite with a custom colour.

We often come across unsuccessful DIY repair attempts – which might make us slightly biased – plus, we recognize the superior outcome when comparing a DIY repair kit and the expert finish we provide.

Although certain minor bathroom problems can be handled yourself, including simple drain cleaning, most are best left to professionals.

Our knowledge allows us to spot deeper concerns that could go unnoticed.

When a cast iron or pressed steel bath is made, it is protected by an ultra-strong and wear-resistant layer of enamel.

This hard-glazed enamel surface is applied through high-temperature fusion at extreme heat levels and forms a strong and glossy finish to result in a sleek, polished look.

Definitely! We handle any surface flaws as part of the bath refinishing procedure, though, if you notice isolated chips or cracks on an otherwise undamaged enamel, our experts can repair it.

Many of our clients reach out to us who have accidentally knocked tiles, metal plugs, or loose objects into the bath and damaged the enamel.

No worries if you’ve experienced this, our team can restore it seamlessly!

Ask About Our Schedule and Receive a Quote

Contact The Bath Fixer today for a free consultation and to check availability.

Get a Quote
CallCall Now QuoteFREE Quote