Your trusted professionals at Bath Fixer Surrey specialize in seamless acrylic bath repairs, professional shower tray resurfacing, chip and crack repair for sinks, bathtub reglazing, and fixing wear and tear on hard surfaces.
Acrylic baths are prone to surface damage and are susceptible to damage from dropped tiles while tiling. Sometimes a glass partition to shift and dig into the surface. The rim of the bathtub can break if excessive pressure is applied or it is put under pressure when adjusting surrounding tiles. It’s common for, an acrylic bath can be damaged in storage or transit.
No matter the damage, our experts can likely restore it.
Reach out to us, or send us a quick message, or WhatsApp or text us some images, and we’ll assess the damage.
Upon arrival, we shield the bathroom floor, toilet, washbasin, radiators, and major fixtures.
We thoroughly clean the bath using specialized cleaning agents and remove any rotten silicone around the bath.
We repair any damage, ranging from small fractures and surface chips, abrasions, mineral deposits, and erosion caused by minerals in water. For major wear and damage on the tub’s bottom, we repair that also.
We cover the bathroom tiles, walls, bathroom fixtures, drain opening, and overflow drain with specialized covering materials to avoid any coating residue.
We use a special cleaning solvent to dissolve and lift oil residues, dust and particles, etc..
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Following that, we coat the surface with the reinforcing primer for maximum surface adhesion.In contrast to many resurfacing services, our process includes a double-bonding system, so the refinished surface has a very strong hold to the original surface.
We apply an professional-grade heat-curing process to cure the new enamel and remove the masking.
After that, we apply expert refinements, bringing out a smooth, high-gloss effect to achieve an impeccable result.
As a finishing step, we seal with a protective waterproof sealant so it is ready for use.
Stone work surfaces are prone to chipping at the corners, due to their exposed design.
The material is not supported on the open edge, and a hard object like a pot could result in a noticeable chip.
- Stains and Discolouration Even though they are highly durable, specific liquids and ingredients might result in deep-set stains on these surfaces.
- Scuffs and Impact Damage Unintentional knife marks, heavy impacts, or regular wear and tear might lead to light surface marks or dents on the worktop.
- Material Breakage The edges or corners, when impacted by heavy objects, are prone to minor fractures, diminishing its aesthetic appeal.
