Bath Fixer Berkshire specialists are experts in bath repair for acrylic surfaces, restoring acrylic shower trays, chip and crack repair for sinks, bathtub reglazing, and hard surface repairs.
Acrylic tubs are relatively delicate and are susceptible to damage from impact from loose tiles. At times a shower guard to dislodge and dig into the surface. The bath’s edge can fracture if excessive pressure is applied or it is put under pressure when removing the panel. In several instances, an acrylic bath can be damaged in storage or transit.
No matter the damage, we can provide a professional solution.
Reach out to us, or fill in an enquiry form, or message us with a few photos, and we’ll offer professional recommendations.
As the first step, we dust sheet the bathroom floor, WC, sink, radiators, and key sections of the bathroom.
We professionally clean the surface with specific cleaners and eliminate old, degraded sealant.
We repair any damage, such as small fractures and surface chips, abrasions, calcium buildup, and deteriorated enamel due to water exposure. If the base of your bath has cracks or holes, we reinforce and fix it completely.
Our team carefully protects the bathroom tiles, walls, taps, waste, and spillover outlet using protective masking tape to avoid any coating residue.
We use a special cleaning solvent to remove grimy deposits, surface contaminants, unwanted residues.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Following that, we coat the surface with the second bonding agent using high-temperature application.Unlike standard refinishing providers, we apply an extra adhesion layer, so the enamel surface we spray on remains securely attached for years to come.
We employ an specialized infrared drying technology to harden and set the fresh enamel coating and take off the protective coverings.
We then apply expert refinements, polishing, etc. to make sure it’s perfect.
We then carefully apply a fresh silicone seal so your bath is fully usable.
Granite worktops can be chipped on their edges, because this area lacks structural support.
The material is not supported on the open edge, and a forceful hit from cookware could result in a noticeable chip.
- Persistent Marks and Discoloration Despite their resistance, various harsh products can sometimes leave persistent stains on these surfaces.
- Chips, Scratches, and Dents Unintentional knife marks, forceful blows, or regular wear and tear might lead to faint abrasions or small depressions on the worktop.
- Surface Chips Perimeter sections, if subjected to hard knocks, can chip, disrupting the smooth finish.
