Whether it's small surface flaws or a heavily scratched or cracked bath, the skilled specialists at Bath Fixer Fareham can carry out a sink, shower, or bath chip repair and recondition old, cracked, or chipped surfaces using a affordable way to avoid full bathtub replacement.
Bath surfaces, sinks, and shower trays commonly experience impact damage from accidental impacts. Such incidents can leave noticeable damage, but that doesn’t mean you need a full replacement.
We have years of experience in hard surface repairs and specialize in:
Baths Repair
Floor Tile Repair
Cupboard Doors Repair
Windows Repair
uPVC Cills Repair
Why Choose Bath Fixer?
The experts at Bath Fixer are fully trained to provide expert surface restoration services covering all types of doors, various flooring surfaces, kitchen and bathroom countertops, baths, shower bases, tiles, window frames and cills, tables, cabinets, and wooden fixtures, and so much more in the Hampshire region.
Bath Resurfacing Hampshire
Old enamel baths tend to become gritty and challenging to keep spotless as the years pass.
When this happens, it’s time for Bath Fixer Fareham to apply our professional reglazing service.
Fiberglass or acrylic baths with frequent use lose their original shine, thus making your bathroom look tired.
Whether you need an enamel bathtub refinishing or a full resurfacing for an acrylic fixture, with Bath Fixer Fareham, your like-new bath surface will maintain its quality good as ever for years to come.
The professionals at Bath Fixer Fareham can bring back the aesthetics of your bath for much less than replacement with our specialized bathtub refinishing and restoration.
Resurfacing is a perfect solution for various bath materials, be it modern acrylic tubs and traditional enamel-coated bathtubs to vintage cast iron bathtubs and reinforced fiberglass baths.
Our unique refinishing method is compatible with all materials, so we can resurface and reglaze all types of tubs and fixtures.
For acrylic tub restoration to refinishing cast iron bathtubs, the final result will have your existing bath looking like new again.
Bath Fixer Fareham’s restoration services have saved our clients reduce expenses by more than 60% by avoiding a full bathtub installation.
With resurfacing, we eliminate surface damage and blemishes, and apply a new surface coating for an flawless, showroom-quality result.
Shower Tray Restoration Fareham
Shower trays are often chosen for their cost-effectiveness and practicality, delivering a efficient solution for bathroom layouts.
But as the years go by, wear and tear can take its toll, making them look outdated and requiring extra effort for upkeep.
Here’s where our specialists at Bath Fixer Fareham can help, helping you avoid unnecessary spending of buying an entirely new shower tray.
The skilled professionals at Fareham focus on offering reliable and efficient service, restoring your shower trays are restored to their former glory.
No matter the level of wear and tear, we have the skills and tools to handle all types of damage, ensuring a polished, like-new finish.
What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.
FREE Quote
Request Form
Professional Acrylic Bath Fixing Fareham
Bath Fixer Hampshire provide industry-leading solutions for acrylic bath repair, acrylic shower tray repair, ceramic basin restoration, bath re-enamelling, and long-lasting surface restoration.
Acrylic bathtubs have a softer surface and may incur damage from dropped tiles while tiling. At times a shower door to fall and leave a deep mark. The bath’s edge can snap if too much weight is put on it or experiences force when installing new fixtures. Often, an acrylic bath can be damaged in storage or transit.
Whatever the problem may be, we have the skills to repair it.
Call us, or complete our online contact form, or message us with a few photos, and we’ll offer professional recommendations.
Bath Re-Enamelling and Bath Resurfacing Full Step-by-Step Procedure
As the first step, we lay protective sheets on the bathroom floor, commode, sink, heaters, and any exposed surfaces.
We thoroughly clean the bath with high-quality bath-safe products and strip away moldy or damaged silicone.
We handle all bath surface repairs, such as small fractures and surface chips, abrasions, limescale, and worn away enamel from hard water. If there are holes or damage at the bottom of the bath, we restore it professionally.
We safeguard the surrounding tiles, adjacent surfaces, taps, waste, and spillover outlet using protective masking tape to prevent spray getting on these.
Our team applies a professional-grade cleaning agent to remove any grease, dust and particles, etc..
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
We proceed by spraying the additional adhesion layer through heat-assisted bonding.In contrast to many resurfacing services, we reinforce the bond with a second primer, allowing the reglazed bath has a very strong hold to the original surface.
Our team utilizes an infrared low-bake system to bond the refinished surface and unveil the fully restored bath.
After that, we apply expert refinements, ensuring a flawless, mirror-like finish to ensure a like-new appearance.
We then carefully apply a protective waterproof sealant so it is ready for use.
Professional Granite Worktop Fixing Fareham, Hampshire
Granite countertops may sustain chips at the corners, because this area lacks structural support.
The material is not supported on the open edge, and a forceful hit from cookware may cause a small section to break away.
Stubborn Stains on Worktops Although they are stain-resistant, certain chemicals or foods might result in deep-set stains on these surfaces.
Scuffs and Impact Damage Minor surface abrasions, dropped objects, or constant usage could create superficial scratches or small depressions on the worktop.
Edge Damage The most exposed areas, under sudden pressure, can chip, affecting its flawless appearance.
Fix Your Worktop Today! — Contact Us Now!
Speak with the Hampshire team for budget-friendly repairs and professional guidance.
Hundreds of satisfied clients in Hampshire rave about our expert bath repair and bath resurfacing
services.
Good communication:
Kept me informed and arrived as scheduled.
Alex made sure I understood the process before starting.
He protected all surfaces before starting and worked meticulously.
He cleaned up thoroughly, and we’re thrilled with the outcome—the bath looks fantastic!
- David E, Hampshire
Very Professional
Ilia’s work was outstanding — was meticulous, friendly, and ensured a perfect finish.
Highly recommend Ilia and Bath Fixer
—Sarah W., Fareham, Hampshire
Timely and Transparent
Top-notch service.
Called on Monday, and by Wednesday, Ilia was here as scheduled to fix two holes in my acrylic bath.
Ilia was courteous and highly efficient.
The repair blends perfectly, with a flawless colour match.
No hesitation in recommending Bath Fixer and their brilliant service.
— Trent D., Hampshire
Reliable uPVC Door Resurfacing
Here at Bath Fixer Fareham, we understand the importance of maintaining the appearance and functionality of your uPVC doors.
Our expert repair techniques features seamless tone and finish correction, allowing the fixed spots to integrate flawlessly with the rest of the structure.
We thoroughly treat and prime the affected section, flawlessly restoring damaged spots.
Handling both light blemishes and major breaks, our specialized knowledge offers an affordable, eco-friendly, and hassle-free solution to door replacement.
Frequently Asked Questions About Our Services
Reglazing usually save you up to 60% on the cost of installing a new bathtub.
Of course, you can easily swap your classic enamel tub for a budget-friendly plastic tub, but you’d be giving up an highly desirable item for a far inferior and lower-value bath.
Of course. Our resurfacing solution is designed to be applied to bathtubs, sinks, pedestals, and even wall tiles.
That being said, we suggest that the WC is replaced, this is due to the harsh cleaning process. Frequent scrubbing and disinfectants could reduce the lifespan of the finish.
You can restore your entire bathroom setup with a custom colour.
We only see unsuccessful DIY repair attempts – so we probably have a bias on this point – plus, we recognize the superior outcome between the use of a kit and what we can achieve.
While some common bathroom issues are OK to DIY, like clearing a blocked drain, it’s often wiser to call in the pros.
Our knowledge allows us to detect hidden issues before they escalate.
In the production process of cast iron and steel baths, it is protected by an exceptionally tough and robust layer of enamel.
This protective enamel layer is thermally bonded to the tub in an intense heating process and solidifies as it cools to ensure a flawless, mirror-like finish.
Definitely! We handle any damage as part of the tub reglazing service, but if you have isolated chips or cracks on an otherwise good surface, we can still help.
We get many calls from people who have accidentally knocked tiles, solid fixtures, or random household items into the bath and left noticeable marks.
No worries if you’ve experienced this, our team can restore it seamlessly!
Get a Free Quote and Check Our Availability
Get in touch with The Bath Fixer now for a no-obligation quote and to see our available slots.
