Whether it's small surface flaws or a badly deteriorated tub, team Bath Fixer New-Romney specialize in a seamless repair for damaged sinks, showers, and tubs and revive worn-out bathroom fixtures offering a affordable solution instead of costly replacements.
Sinks, baths, and shower trays frequently suffer wear and tear because of heavy objects falling. Such incidents can leave noticeable damage, but don’t take this as a sign to replace the bath or basin.
Backed by years of experience, we excel in hard surface restoration, including:
Baths Repair
Wood Flooring Repair
Cupboard Doors Repair
Windows Repair
uPVC Cills Repair
What Makes Bath Fixer Unique?
Our skilled Bath Fixer technicians specialize in high-quality damage repair solutions for doors, various flooring surfaces, worktops, enamel and acrylic tubs, shower bases, tiles, window sills and frames, tables, cabinets, and wooden fixtures, and a wide range of other surfaces throughout Kent.
Bath Repair Kent
Aged enamel-coated baths gradually turn coarse and hard to maintain due to wear and tear.
If your bath reaches this stage, it’s time for the professionals at Bath Fixer New-Romney to conduct our bath resurfacing service.
Modern acrylic tubs with frequent use develop yellowing and staining, giving your space a dull, worn-out look.
If you’re looking for an enamel bath resurface or a colour refresh for an acrylic tub, with Bath Fixer New-Romney, your like-new bath surface will maintain its quality good as ever for a long time.
Bath Fixer New-Romney experts are able to revive the appearance of your bath for much less than replacement with our expert professional resurfacing solutions.
Resurfacing is a perfect solution for any type of bathtub, whether it's acrylic and traditional enamel-coated bathtubs to cast iron and reinforced fiberglass baths.
Our unique refinishing method is engineered for multiple bathtub compositions, allowing us to carry out work all types of tubs and fixtures.
For acrylic tub restoration to restoring old cast iron baths, the end product will have your aged tub looking like new again.
The Kent-wide bathtub refinishing service we offer have saved our clients cut costs by over 60% when compared to the cost of bath replacement.
With resurfacing, we eliminate surface damage and blemishes, and apply a new surface coating for an factory-fresh look.
Professional Shower Tray Reglazing New-Romney
Many homeowners opt for shower trays for their reasonable pricing and convenience, offering a modern option for space-conscious bathrooms.
Yet with frequent use, wear and tear can take its toll, giving them a dull and tired look and difficult to maintain.
Here’s where our specialists at Bath Fixer New-Romney can help, eliminating the need for a pricey replacement of buying an entirely new shower tray.
The trusted experts at New-Romney are committed to delivering top-tier and hassle-free restorations, making sure your shower base regain their original shine.
Whether it’s scratches, chips, or stains, our team possesses the expertise and equipment to handle all types of damage, leaving your shower trays looking shiny and brand new.
What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.
FREE Quote
Request Form
Acrylic Tub Repair in New-Romney
Our team at Bath Fixer Kent provide industry-leading solutions for acrylic bathtub restoration, shower tray refinishing, ceramic basin restoration, high-quality enamel restoration, and damage repair for solid surfaces.
Acrylic baths are prone to surface damage and may incur damage from impact from loose tiles. In some cases a shower screen to slip and cause a visible indentation. The acrylic border can fracture if too much weight is put on it or is leveraged when accessing the plumbing. Many times, an bath incurs minor dents in shipping.
No matter the damage, chances are we can fix it.
Reach out to us, or submit a service request, or share images through text or WhatsApp, and we’ll offer professional recommendations.
How We Carry Out Bath Resurfacing and Re-Enamelling
Upon arrival, we lay protective sheets on the ground surface, lavatory, washbasin, warming appliances, and major fixtures.
We thoroughly clean the bath with specific cleaners and get rid of deteriorated caulking around the tub.
We restore and fix imperfections, including chips in the bath, abrasions, mineral deposits, and worn away enamel from hard water. Should your bathtub have structural issues, we reinforce and fix it completely.
We cover the surrounding tiles, adjacent surfaces, faucets, drain area, and bath overflow with masking to avoid any coating residue.
We use a high-strength degreasing solution to get rid of grimy deposits, accumulated grime, etc..
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
We proceed by spraying the second bonding agent through heat-assisted bonding.Unlike standard refinishing providers, we use two bonding agents, so the refinished surface firmly adheres for long-lasting results.
We apply an infrared low-bake system to bond the refinished surface and take off the protective coverings.
We then apply expert refinements, bringing out a smooth, high-gloss effect to achieve an impeccable result.
As a finishing step, we seal with a protective waterproof sealant so your newly resurfaced bath is protected.
Granite Worktop Chip Repair New-Romney, Kent
Stone work surfaces are prone to chipping along the edges, as this is the most vulnerable point.
The material is not supported on the open edge, and a dropped pan or utensil can clip it and knock a bit off.
Stubborn Stains on Worktops While these surfaces are built to last, certain chemicals or foods might result in deep-set stains on these surfaces.
Scratches and Dents Unintentional knife marks, heavy impacts, or constant usage can result in light surface marks or shallow marks on the worktop.
Chipping Perimeter sections, when impacted by heavy objects, may sustain chips, disrupting the smooth finish.
Restore Your Worktop Instantly! — Call Now!
Get in touch with the experts at Kent for high-quality service at great prices and expert advice.
Hundreds of satisfied clients in Kent rave about our expert bath repair and bath resurfacing
services.
Good communication:
Great communication with a timely arrival.
Alex made sure I understood the process before starting.
He was meticulous in masking up and put in a lot of effort.
He made sure the area was clean before leaving, and we’re delighted with the results—our bath looks amazing!
- David E, Kent
Very Professional
Ilia delivered excellent results — worked efficiently, was polite, tidy, and the outcome was flawless.
Highly recommend Ilia and Bath Fixer
—Sarah W., New-Romney, Kent
Timely and Transparent
Top-notch service.
Scheduled on Monday, and Ilia showed up on time Wednesday to restore my damaged acrylic bath.
Polite, prompt, and professional service throughout.
The repair is practically invisible thanks to the expert colour matching.
Would definitely suggest Bath Fixer and Ilia for any repairs.
— Trent D., based in Kent
High-Quality uPVC Door Repairs
Here at Bath Fixer New-Romney, we prioritize maintaining the appearance and functionality of your modern uPVC door surfaces.
Our expert repair techniques involves precise color blending and surface replication, ensuring that the repaired areas blend seamlessly with the rest of the structure.
We thoroughly treat and prime the affected section, flawlessly restoring damaged spots.
For everything from scratches to deep fractures, our specialized knowledge ensures a money-saving, green, and efficient repair option to buying a brand-new uPVC door.
What Customers Ask Most About Our Services
Refinishing your bath can typically save you up to 60% on the cost of getting a brand-new enamel tub.
Of course, you can easily swap your vintage enamel bath for a budget-friendly plastic tub, but this means sacrificing an extremely sought-after item for a less valuable and less desirable bath.
Yes. Our specialized coating is designed to be applied to bathtubs, sinks, standalone basins, and even tiles.
Although, we do recommend that the lavatory is swapped out, this is due to the way toilets are cleaned. Toilet brushes and harsh cleaners could reduce the lifespan of the finish.
You can resurface your entire bathroom setup to match your preferred shade.
We only see unsuccessful DIY repair attempts – which might make us slightly biased – also, we know the difference in quality when looking at at-home kits and the professional results we deliver.
Although certain minor bathroom problems can be handled yourself, for example, removing a drain clog, most are best left to professionals.
Our knowledge allows us to spot deeper concerns that could go unnoticed.
In the production process of cast iron and steel baths, it is protected by an ultra-strong and wear-resistant layer of enamel.
This hard-glazed enamel surface is actually melted onto the bath at extreme heat levels and forms a strong and glossy finish to ensure a flawless, mirror-like finish.
Of course! We take care of any cracks or chips as part of the resurfacing process, however, if there are minor surface damage on an otherwise undamaged enamel, we have a solution.
It’s common for homeowners to contact us who have dropped tiles, metal plugs, or heavy accessories into the bath and left noticeable marks.
No worries if you’ve experienced this, we can fix it quickly!
Check Availability and Request a Quote
Speak to The Bath Fixer team now for a free consultation and to confirm scheduling options.
