The experts at Bath Fixer Hertfordshire are experts in acrylic bath repair, acrylic shower tray repair, seamless sink refinishing, bathtub reglazing, and long-lasting surface restoration.
Acrylic bathtubs have a softer surface and may incur damage from accidents during bathroom renovations. In some cases a shower door to fall and leave a deep mark. The bath’s edge can break if undue force is exerted or is impacted when taking off the bath panel. In several instances, an acrylic bath can be damaged in storage or transit.
Whatever the problem may be, we have the skills to repair it.
Reach out to us, or send us a quick message, or message us with a few photos, and our team will provide expert guidance.
Upon arrival, we cover the floor, lavatory, basin, heating units, and major fixtures.
We thoroughly clean the bath with specific cleaners and eliminate old, degraded sealant.
We repair any damage, ranging from chips in the bath, surface marks, calcium buildup, and faded, thin enamel layers. If there are holes or damage at the bottom of the bath, our specialists will ensure a flawless finish.
We mask off the tiles, walls, faucets, waste, and overflow drain with specialized covering materials to ensure no overspray affects them.
We use a professional-grade cleaning agent to get rid of grimy deposits, surface contaminants, unwanted residues.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Following that, we coat the surface with the reinforcing primer using high-temperature application.Unlike standard refinishing providers, we apply an extra adhesion layer, allowing the reglazed bath forms an ultra-durable bond.
We employ an infrared low-bake system to harden and set the fresh enamel coating and clear away all masking materials.
Following this, we apply expert refinements, buffing, refining, and perfecting the surface to deliver a pristine, professional-grade outcome.
To complete the process, we add a high-quality sealing layer so it is ready for use.
Stone work surfaces are prone to chipping on their edges, since this is where they are weakest.
Without backing, the edges remain at risk, and a dropped pan or utensil can clip it and knock a bit off.
- Stains and Discolouration Even though they are highly durable, some substances and spills may occasionally cause lasting marks on these surfaces.
- Scuffs and Impact Damage Accidental cuts, strong collisions, or constant usage may cause light surface marks or small depressions on the worktop.
- Surface Chips Worktop edges and corners, under sudden pressure, are prone to minor fractures, disrupting the smooth finish.
