Bath Resurfacing Totton, Hampshire

Need Bath Repair & Bath Resurfacing Service in Totton, Hampshire?

Affordable Bath Damage Restoration Totton

From light wear and tear to a heavily scratched or cracked bath, our experts at Bath Fixer Totton can carry out a seamless repair for damaged sinks, showers, and tubs and renew your bath, sink, or shower through a budget-friendly solution instead of costly replacements.

Sinks, baths, and shower trays can get chipped or cracked when things are dropped onto them. Such incidents can leave noticeable damage, but don’t take this as a sign to replace the bath or basin.

Bath Restoration Credentials Totton
Goole Reviewath Repair Services in Totton Trustpilot Review- Bath Resurfacing in Totton

Expert Basin Repairs in Hampshire

With extensive experience in hard surface restoration, we specialize in:

  • Basin Repairs
  • Floor Tile Repair
  • Worktops Repair
  • Windows Repair
  • Wooden Frames Repair

The Bath Fixer Difference

Bath Fixer technicians are trained to deliver high-quality surface restoration services to internal and external doors, wooden, laminate, and tiled floors, solid and laminate worktops, bathtubs, shower trays, wall and floor tiles, window frames and cills, furniture, and a wide range of other surfaces throughout Hampshire.

Bath Resurfacing & Bath Repair Hampshire

  • Old enamel baths can become rough and difficult to clean as the years pass.

    At this point, it’s time for the professionals at Bath Fixer Totton to perform our enamel restoration treatment.

    Modern acrylic tubs as they age begin to fade, giving your space a dull, worn-out look.

    If you’re looking for a full reglazing of your enamel tub or a colour refresh for an acrylic tub, our team at Bath Fixer Totton, your refreshed and revitalized bath will continue looking in excellent condition with lasting durability.
  • Bath Fixer Totton experts can rejuvenate the visual appeal of your tub at a fraction of the cost with our high-quality tub reglazing and repair.

    Refinishing offers the most cost-effective way for any type of bathtub, including lightweight acrylic baths and traditional enamel-coated bathtubs to classic cast iron tubs and reinforced fiberglass baths.

    Our specialist process is compatible with all materials, so we can resurface and reglaze on any type of bathroom suite.

    From acrylic bath repairs to refinishing cast iron bathtubs, the final result will have your aged tub looking like new again.

    Bath Fixer Totton’s restoration services have saved our clients save more than 60 percent of the cost when compared to the cost of bath replacement.

    Through reglazing, we eliminate surface damage and blemishes, and seal it with a high-quality enamel finish for an immaculate finish.

Professional Shower Tray Reglazing Totton

Shower trays are often chosen for their affordability and convenience, providing a practical feature for bathroom layouts.

However, over time, wear and tear can take its toll, leaving them looking worn and requiring extra effort for upkeep.

Bath Fixer Totton offers the perfect solution, saving you from the cost and inconvenience of buying an entirely new shower tray.

Our experienced specialists in Totton are committed to delivering high-quality and dependable repairs, guaranteeing that your shower surface return to pristine condition.

Be it cracks, fading, or surface damage, our specialists use professional-grade materials to handle all types of damage, leaving your shower trays looking shiny and brand new.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

FREE Quote Request Form

Acrylic Tub Repair in Totton

Bath Fixer Hampshire offer professional services in seamless acrylic bath repairs, professional shower tray resurfacing, ceramic basin restoration, bath re-enamelling, and fixing wear and tear on hard surfaces.

Acrylic bath surfaces are not as hard as other materials and may incur damage from falling tiles during tiling. Sometimes a shower screen to slip and leave a deep mark. The rim of the bathtub can be split if undue force is exerted or experiences force when removing the panel. Often, an bath incurs minor dents in shipping.

If your bath is chipped, cracked, or damaged, we can provide a professional solution.

Call us, or submit a service request, or WhatsApp or text us some images, and we’ll let you know the best solution.

Complete Guide to Bath Re-Enamelling and Resurfacing

Upon arrival, we dust sheet the flooring, toilet, washbasin, warming appliances, and major fixtures.

We thoroughly clean the bath with high-quality bath-safe products and eliminate old, degraded sealant.

We repair any damage, including bathtub chips, cosmetic imperfections, calcium buildup, and worn away enamel from hard water. Should your bathtub have structural issues, we repair that also.

We mask off the tiles, walls, taps, drain area, and overflow drain using protective masking tape to avoid any coating residue.

We utilize a special cleaning solvent to remove grimy deposits, surface contaminants, any remaining debris.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

Next, we apply the additional adhesion layer for maximum surface adhesion.Unlike other bath re-enamelling companies, our process includes a double-bonding system, allowing the reglazed bath remains securely attached for years to come.

We use an infrared low-bake system to cure the new enamel and unveil the fully restored bath.

Next, our experts do any detailed finishing touches, buffing, refining, and perfecting the surface to make sure it’s perfect.

Finally, we apply a fresh silicone seal so it is ready for use.

Granite Countertop Chip Restoration in Totton, Hampshire

Granite worktops can suffer minor damage on their edges, due to their exposed design.

The material is not supported on the open edge, and a forceful hit from cookware can clip it and knock a bit off.

  • Persistent Marks and Discoloration Even though they are highly durable, various harsh products may occasionally cause lasting marks on these surfaces.
  • Chips, Scratches, and Dents Unexpected nicks, heavy impacts, or everyday activities can result in light surface marks or small depressions on the worktop.
  • Chipping The most exposed areas, if hit with force, could break off slightly, affecting its flawless appearance.

Professional Worktop Repair Available! — Call Us Today!

Get in touch with the experts at Hampshire for high-quality service at great prices and free tips.

Happy Customers Speak Out:

Hundreds of satisfied clients in Hampshire rave about our expert bath repair and bath resurfacing services.

Professional uPVC Door Restoration
The team at Bath Fixer Totton, we recognize the value of ensuring the longevity and condition of your uPVC doors.

Our detailed restoration method involves colour and texture matching, ensuring that the repaired areas blend seamlessly with the rest of the door.

We thoroughly treat and prime the affected section, ensuring a smooth, even finish.

For everything from scratches to deep fractures, our professional skills provides a cost-effective, sustainable, and convenient alternative to installing a new door.

Top FAQs About What We Offer

Resurfacing will very often save you close to 60% on the cost of installing a new bathtub.

You may choose to switch your classic enamel tub for a cheaper acrylic alternative, but you’d be giving up an extremely sought-after bathtub for a less valuable and lower-value bath.

Of course. Our material is engineered for use on baths, washbasins, standalone basins, and even wall tiles.

We would however recommend that the toilet is swapped out, owing to the harsh cleaning process. Toilet brushes and harsh cleaners may cause premature deterioration.

You have the option to refinish your entire bathroom setup in any finish you desire.

We often come across unsuccessful DIY repair attempts – which may give us a certain perspective – also, we know the difference in quality between the use of a kit and the expert finish we provide.

While small bathroom repairs can sometimes be done without help, such as unclogging a drain, many require expert attention.

Our knowledge allows us to know whether a bigger problem may be hiding in plain sight.

When a cast iron or pressed steel bath is made, it is coated with an exceptionally tough and robust layer of enamel.

This hard-glazed enamel surface is actually melted onto the bath through a controlled melting process and hardens during cooling to create a shiny, glass-like effect.

Of course! We automatically fix any damage as part of the restoration treatment, yet, if your bath has minor surface damage on an otherwise undamaged enamel, we have a solution.

We frequently hear from customers who have dropped tiles, heavy drain stoppers, or loose objects into the bath and chipped the surface.

If this is the case, then don’t worry, it is easily repaired!

Find Out Our Availability and Get a Price Estimate

Reach out to The Bath Fixer today for your free estimate and to confirm scheduling options.

Get a Quote
CallCall Now QuoteFREE Quote