Bath Fixer Hertfordshire are specialists in acrylic bathtub restoration, restoring acrylic shower trays, seamless sink refinishing, bath re-enamelling, and resurfacing solid bath fixtures.
Acrylic bathtubs have a softer surface and are susceptible to damage from falling tiles during tiling. Sometimes a glass partition to shift and scratch or gouge the bath. The lip on the edge of the bath can fracture if excessive pressure is applied or is leveraged when adjusting surrounding tiles. Frequently, an bathtub suffers nicks and scratches while stored.
If your bath is chipped, cracked, or damaged, we can provide a professional solution.
Get in touch by phone, or send us a quick message, or WhatsApp or text us some images, and we can advise.
Once on-site, our team dust sheet the bathroom floor, lavatory, washbasin, warming appliances, and any exposed surfaces.
We thoroughly clean the bath with high-quality bath-safe products and get rid of deteriorated caulking around the tub.
Our experts fix all types of damage, ranging from minor cracks and chipped enamel, abrasions, mineral deposits, and deteriorated enamel due to water exposure. For major wear and damage on the tub’s bottom, we reinforce and fix it completely.
Our team carefully protects the tiles, vertical surfaces, water outlets, drain opening, and bath overflow using protective masking tape to prevent spray getting on these.
We utilize a professional-grade cleaning agent to dissolve and lift stubborn grease buildup, accumulated grime, etc..
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Following that, we coat the surface with the additional adhesion layer for maximum surface adhesion.In contrast to many resurfacing services, we use two bonding agents, so the refinished surface firmly adheres for long-lasting results.
We use an professional-grade heat-curing process to bond the refinished surface and remove the masking.
Next, our experts do any detailed finishing touches, buffing, refining, and perfecting the surface to achieve an impeccable result.
To complete the process, we add a fresh silicone seal so it is ready for use.
Stone work surfaces may sustain chips along the edges, due to their exposed design.
The unsupported edges make them more fragile, and a dropped pan or utensil can clip it and knock a bit off.
- Stubborn Stains on Worktops While these surfaces are built to last, certain chemicals or foods might result in deep-set stains on these surfaces.
- Chips, Scratches, and Dents Minor surface abrasions, heavy impacts, or constant usage can result in minor scuffs or indentations on the worktop.
- Surface Chips Perimeter sections, under sudden pressure, can chip, compromising the worktop’s seamless look.
