Bath Resurfacing Abinger-Hammer, Surrey

Name: Bath Fixer Abinger-Hammer, RH5
Address: Abinger-Hammer, RH5, Surrey, United Kingdom
Telephone: 0345 017 0787
Price range: ££-£££
Rating: 4.9

Need Bath Repair & Bath Resurfacing Service in Abinger-Hammer, RH5?

Call us
0345 017 0787

Quote Request Form

Affordable Sink Chip Restoration Abinger-Hammer

Whether it's small surface flaws or a severely worn bathtub, the professionals at Bath Fixer Abinger-Hammer can carry out a sink, shower, or bath chip repair and bring back the original beauty of your bath, sink, or shower offering a affordable alternative to replacements and removals.

Basin, bath, or shower tray surfaces can get chipped or cracked because of heavy objects falling. Such incidents can leave noticeable damage, but there’s no need for a costly replacement.

Call us
0345 017 0787

How it works

Bath Resurfacing Surrey

Vintage enamel tubs gradually turn coarse and hard to maintain over time.

Once this occurs, it’s time for our expert team at Bath Fixer Abinger-Hammer to apply our bath resurfacing service.

Acrylic baths over time lose their original shine, which can make your entire bathroom appear outdated.

If you’re looking for an enamel bath resurface or a full resurfacing for an acrylic fixture, our team at Bath Fixer Abinger-Hammer, your sparkling newly resurfaced bath will continue looking good as ever for years to come.
The Bath Fixer Abinger-Hammer team can bring back the appearance of your tub at a fraction of the cost with our expert bath resurfacing and repair service.

Our restoration process is the best choice for all kinds of baths, ranging from lightweight acrylic baths and traditional enamel-coated bathtubs to classic cast iron tubs and fiberglass tubs.

Our specialist process is compatible with all materials, allowing us to carry out work for any bathtub design.

For acrylic tub restoration to re-enamelling vintage cast iron tubs, the finish will have your existing bath looking white, bright, and clean.

Our bath repair and resurfacing service in Surrey have saved our clients save more than 60 percent of the cost instead of purchasing a brand-new bath.

Using our refinishing process, scratches, stains, and dull areas are erased, and seal it with a high-quality enamel finish for an flawless, showroom-quality result.

Shower Base Refinishing Abinger-Hammer

Shower trays are often chosen for their cost-effectiveness and practicality, offering a modern feature for bathroom layouts.

But as the years go by, constant exposure to water and soap can degrade them, making them look outdated and hard to clean.

Bath Fixer Abinger-Hammer offers the perfect solution, eliminating the need for a pricey replacement of undergoing a full shower tray replacement.

The trusted experts at Abinger-Hammer are committed to delivering reliable and efficient service, ensuring that your shower trays return to pristine condition.

From minor scratches to deep chips and stubborn stains, our specialists use professional-grade materials to repair and resurface any imperfections, giving your shower a smooth, refreshed appearance.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

Expert Acrylic Bath Resurfacing Abinger-Hammer

Your trusted professionals at Bath Fixer Surrey are experts in acrylic bathtub restoration, fixing cracks and damage in shower trays, ceramic sink repair, high-quality enamel restoration, and fixing wear and tear on hard surfaces.

Acrylic tubs are relatively delicate and are vulnerable to harm from dropped tiles while tiling. It’s not uncommon for a shower door to fall and create a surface gouge. The acrylic border can be split if too much weight is put on it or experiences force when accessing the plumbing. Many times, an acrylic bath can be damaged in storage or transit.

Regardless of the issue, we can provide a professional solution.

Reach out to us, or complete our online contact form, or message us with a few photos, and we’ll let you know the best solution.

How We Carry Out Bath Resurfacing and Re-Enamelling

As the first step, we dust sheet the floor, toilet, washbasin, heating units, and all large surface areas.

We professionally clean the surface with high-quality bath-safe products and get rid of deteriorated caulking around the tub.

Our experts fix all types of damage, including chips in the bath, abrasions, calcium buildup, and erosion caused by minerals in water. If the base of your bath has cracks or holes, we restore it professionally.

We safeguard the bathroom tiles, adjacent surfaces, bathroom fixtures, drain area, and overflow using protective masking tape to ensure no overspray affects them.

We use a specialized surface cleaner to remove oil residues, surface contaminants, any remaining debris.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

We proceed by spraying the reinforcing primer with a hot air gun.Where others may stop at one bonding layer, we apply an extra adhesion layer, ensuring that the new enamel coating firmly adheres for long-lasting results.

We use an infrared low-bake system to harden and set the fresh enamel coating and take off the protective coverings.

Following this, we perfect the final details, bringing out a smooth, high-gloss effect to deliver a pristine, professional-grade outcome.

To complete the process, we add a new bead of sealant so the surface is watertight and secure.

Granite Worktop Chip Repair Abinger-Hammer, Surrey

Stone work surfaces can suffer minor damage at the corners, due to their exposed design.

The material is not supported on the open edge, and a hard object like a pot may cause a small section to break away.

Surface Staining and Fading Despite their resistance, certain chemicals or foods may occasionally cause lasting marks on these surfaces.
Chips, Scratches, and Dents Accidental cuts, heavy impacts, or daily use can result in superficial scratches or indentations on the worktop.
Material Breakage Perimeter sections, if subjected to hard knocks, are prone to minor fractures, affecting its flawless appearance.

Fix Your Worktop Today! — Contact Us Now!

Get in touch with the Surrey team for affordable service and expert advice.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in Surrey rave about our expert bath repair and bath resurfacing services.

Good communication:

Kept me informed and arrived as scheduled. Alex made sure I understood the process before starting. He carefully masked all surrounding areas and put in a lot of effort. Everything was spotless when he finished, and we’re extremely happy—the bath looks stunning. - David E, Surrey

Very Professional

Ilia’s work was outstanding — was prompt, professional, and left everything spotless. I strongly recommend Ilia and the Bath Fixer team —Sarah W., Surrey, Abinger-Hammer

Timely and Transparent

Excellent experience. Called on Monday, and by Wednesday, Ilia was here as scheduled to fix two holes in my acrylic bath. The process was seamless, with friendly and efficient service. The colour match is spot on, making the repair virtually invisible. Would not hesitate in recommending both the company & Ilia. — Trent D., Surrey

High-Quality uPVC Door Repairs

Bath Fixer Abinger-Hammer specialists, we understand the importance of keeping up the aesthetic and strength of your plastic doors.

Our comprehensive repair process includes precise color blending and surface replication, so the door retains its original appearance with the rest of the door.

We carefully ready the surface for repairs, precisely correcting chips and dents.

From minor scuffs to larger cracks and dents, our high-level craftsmanship offers an affordable, eco-friendly, and hassle-free solution to buying a brand-new uPVC door.

Wondering if we cover your area?

Take a look at the map or see the full list of locations we serve.

Top FAQs About What We Offer

Refinishing your bath can typically save you around 60% on the cost of buying a replacement bath.

Sure, you could replace your high-quality enamel bathtub for a mass-produced acrylic bath, but this means sacrificing an highly desirable bathtub for a less durable and more fragile bath.

Absolutely. Our high-quality formula is designed to be applied to baths, washbasins, sink pedestals, and even wall tiles.

We would however recommend that the WC is swapped out, because of the way toilets are cleaned. Toilet brushes and harsh cleaners can wear down the resurfacing layer.

You can resurface your entire bathroom setup to match your preferred shade.

We primarily encounter unsuccessful DIY repair attempts – which might make us slightly biased – also, we know the difference in quality when looking at at-home kits and what we can achieve.

While small bathroom repairs can sometimes be done without help, including simple drain cleaning, it’s usually safer to rely on professionals.

That’s because we have the experience to detect hidden issues before they escalate.

In the production process of cast iron and steel baths, it is protected by an extremely hard and durable layer of enamel.

This hard-glazed enamel surface is applied through high-temperature fusion at extreme heat levels and solidifies as it cools to create a shiny, glass-like effect.

Definitely! We automatically fix any damage as part of the tub reglazing service, but if you have small chips or damage on an otherwise intact bathtub, we offer a targeted fix.

We frequently hear from customers who have experienced tile breakages, solid fixtures, or heavy accessories into the bath and chipped the surface.

If this is the case, then don’t worry, our team can restore it seamlessly!