From light wear and tear to a bath in need of full restoration, team Bath Fixer Boughton-Corner specialize in a seamless repair for damaged sinks, showers, and tubs and bring back the original beauty of worn-out bathroom fixtures through a budget-friendly alternative to replacements and removals.
Sinks, baths, and shower trays frequently suffer wear and tear from accidental impacts. Such incidents can leave noticeable damage, but there’s no need for a costly replacement.
We are specialists in hard surface repairs, offering expert solutions for:
Baths Repair
Floor Tile Repair
Worktops Repair
Marble & Granite Repair
Aluminium Repair
Why Bath Fixer Stands Out
The experts at Bath Fixer are fully trained to provide professional specialized refinishing work on doors, wooden, laminate, and tiled floors, kitchen and bathroom countertops, bathtubs, shower trays, wall and floor tiles, UPVC and wooden window frames, tables, cabinets, and wooden fixtures, and so much more across TN25.
Bath Repair Kent
Aged enamel-coated baths gradually turn gritty and challenging to keep spotless over time.
If your bath reaches this stage, it’s time for our expert team at Bath Fixer Boughton-Corner to perform our enamel restoration treatment.
Plastic-based bathtubs with frequent use begin to fade, reducing the aesthetic appeal of your bath.
No matter if you require a professional restoration for an enamel bath or a full resurfacing for an acrylic fixture, our team at Bath Fixer Boughton-Corner, your like-new bath surface will continue looking flawless for a long time.
Our specialists at Bath Fixer Boughton-Corner can restore the visual appeal of your bathtub for a fraction of the price with our high-quality tub reglazing and repair.
Our restoration process is the best choice for a wide range of tubs, including lightweight acrylic baths and enamel to cast iron and fiberglass tubs.
Our specialist process is suitable for any bath type, so we can resurface and reglaze all types of tubs and fixtures.
For acrylic tub restoration to refinishing cast iron bathtubs, the finish will have your existing bath looking pristine and modern.
The Kent-wide bathtub refinishing service we offer have enabled homeowners reduce expenses by more than 60% versus completely replacing the tub.
With resurfacing, scratches, stains, and dull areas are erased, and add a durable refinishing layer for an ultra-smooth surface.
Shower Base Refinishing Boughton-Corner
Many homeowners opt for shower trays for their affordability and ease of installation, offering a practical option for bathroom renovations.
But as the years go by, constant exposure to water and soap can degrade them, leaving them looking worn and hard to clean.
Bath Fixer Boughton-Corner offers the perfect solution, sparing you the hassle and expense of buying an entirely new shower tray.
The skilled professionals at Boughton-Corner is dedicated to providing trustworthy and prompt solutions, ensuring that your shower trays return to pristine condition.
No matter the level of wear and tear, our specialists use professional-grade materials to restore your shower trays flawlessly, ensuring a polished, like-new finish.
What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.
FREE Quote
Request Form
Acrylic Tub Repair in Boughton-Corner
Your trusted professionals at Bath Fixer Kent are experts in bath repair for acrylic surfaces, restoring acrylic shower trays, full ceramic sink resurfacing, bath re-enamelling, and resurfacing solid bath fixtures.
Acrylic baths are quite soft and can be affected from dropped tiles while tiling. Occasionally a shower guard to dislodge and cause a visible indentation. The bath’s edge can fracture if undue force is exerted or it is put under pressure when taking off the bath panel. Often, an acrylic tub gets harmed during transportation.
Regardless of the issue, chances are we can fix it.
Get in touch by phone, or submit a service request, or share images through text or WhatsApp, and we can advise.
How We Carry Out Bath Resurfacing and Re-Enamelling
As the first step, we dust sheet the floor, lavatory, washbasin, heaters, and key sections of the bathroom.
We thoroughly clean the bath with specific cleaners and remove any rotten silicone around the bath.
We restore and fix imperfections, including small fractures and surface chips, cosmetic imperfections, hard water stains, and deteriorated enamel due to water exposure. If there are holes or damage at the bottom of the bath, we restore it professionally.
We cover the surrounding tiles, adjacent surfaces, water outlets, drain opening, and overflow by applying precision masking to avoid any coating residue.
We utilize a specialized surface cleaner to get rid of grimy deposits, surface contaminants, etc..
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Then we spray on the extra bonding solution for maximum surface adhesion.Unlike standard refinishing providers, we use two bonding agents, so the refinished surface firmly adheres for long-lasting results.
We employ an professional-grade heat-curing process to harden and set the fresh enamel coating and clear away all masking materials.
We then do any detailed finishing touches, polishing, etc. to achieve an impeccable result.
As a finishing step, we seal with a fresh silicone seal so the surface is watertight and secure.
Expert Granite Surface Repair Boughton-Corner, Kent
Stone work surfaces can suffer minor damage along the edges, since this is where they are weakest.
The material is not supported on the open edge, and a hard object like a pot could result in a noticeable chip.
Stubborn Stains on Worktops While these surfaces are built to last, specific liquids and ingredients may occasionally cause lasting marks on these surfaces.
Scuffs and Impact Damage Accidental cuts, dropped objects, or constant usage could create faint abrasions or shallow marks on the worktop.
Edge Damage The most exposed areas, if hit with force, could break off slightly, disrupting the smooth finish.
Get Your Worktop Repaired Today! — Call Us Now!
Contact the experts at Kent for high-quality service at great prices and helpful insights.
Hundreds of satisfied clients in Kent rave about our expert bath repair and bath resurfacing
services.
Good communication:
Great communication with a timely arrival.
He clearly explained each step and began the work immediately.
He took great care in masking everything up and worked very hard.
He cleaned up thoroughly, and we’re thrilled with the outcome—the bath looks fantastic!
- David E, Kent
Very Professional
Ilia did a fantastic job — was prompt, professional, and left everything spotless.
Wouldn’t hesitate to recommend Bath Fixer and Ilia
—Sarah W., from Boughton-Corner in Kent
Timely and Transparent
Top-notch service.
Called on Monday, and by Wednesday, Ilia was here as scheduled to fix two holes in my acrylic bath.
Polite, prompt, and professional service throughout.
The finish is seamless, and the colour is a perfect match.
Highly recommend Ilia and the team at Bath Fixer.
— Trent D. from TN25
High-Quality uPVC Door Repairs
At Bath Fixer Boughton-Corner, we know how crucial it is to keeping up the aesthetic and strength of your uPVC doors.
Our comprehensive repair process includes seamless tone and finish correction, ensuring that the repaired areas blend seamlessly with the rest of the structure.
We remove debris and smooth out the flaws, meticulously filling and smoothing imperfections.
From minor scuffs to larger cracks and dents, our high-level craftsmanship offers an affordable, eco-friendly, and hassle-free solution to full door replacement.
Want to check if our services are available near you?
Explore our location guide or review the regions we operate in.
Top FAQs About What We Offer
Reglazing usually save you approximately 60% on the cost of getting a brand-new enamel tub.
It’s possible to exchange your classic enamel tub for a mass-produced acrylic bath, but you will be losing an extremely sought-after fixture for a far inferior and lower-value bath.
Yes. Our material is suitable for baths, washbasins, sink pedestals, and even ceramic surfaces.
That being said, we suggest that the toilet is changed, because of the harsh cleaning process. Brushes and chemicals could reduce the lifespan of the finish.
You have the option to refinish your full bathroom suite in any finish you desire.
We often come across cases where repair kits didn’t work well – which might make us slightly biased – also, we know the difference in quality when looking at at-home kits and the professional results we deliver.
While some common bathroom issues are OK to DIY, including simple drain cleaning, it’s often wiser to call in the pros.
Our knowledge allows us to know whether a bigger problem may be hiding in plain sight.
In the production process of cast iron and steel baths, it is finished with an exceptionally tough and robust layer of enamel.
This specialized enamel finish is actually melted onto the bath in an intense heating process and sets into a smooth, tough surface to result in a sleek, polished look.
Definitely! We handle any imperfections as part of the restoration treatment, yet, if your bath has isolated chips or cracks on an otherwise intact bathtub, our experts can repair it.
Many of our clients reach out to us who have experienced tile breakages, chrome plugs, or loose objects into the bath and chipped the surface.
Should this occur, rest assured, our team can restore it seamlessly!
Enquire about Availability and Get a Quote
Contact The Bath Fixer today for a no-obligation quote and to see our available slots.
