The experts at Bath Fixer Kent offer professional services in bath repair for acrylic surfaces, professional shower tray resurfacing, full ceramic sink resurfacing, durable bath refinishing, and damage repair for solid surfaces.
Acrylic bathtubs have a softer surface and can be affected from falling tiles during tiling. Sometimes a glass partition to shift and cause a visible indentation. The bath’s edge can break if too much weight is put on it or it is put under pressure when accessing the plumbing. Frequently, an acrylic bath sustains damage before installation.
Whatever the situation is, we can provide a professional solution.
Give us a ring, or fill in an enquiry form, or share images through text or WhatsApp, and we’ll assess the damage.
Upon arrival, we cover the ground surface, WC, sink, heating units, and all large surface areas.
We meticulously scrub the bath using industry-approved solutions and eliminate old, degraded sealant.
We handle all bath surface repairs, ranging from minor cracks and chipped enamel, abrasions, calcium buildup, and faded, thin enamel layers. If there are holes or damage at the bottom of the bath, we reinforce and fix it completely.
We mask off the surrounding tiles, vertical surfaces, water outlets, drain area, and spillover outlet with specialized covering materials to keep them clean and untouched.
We use a high-strength degreasing solution to remove stubborn grease buildup, dust and particles, etc..
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Next, we apply the additional adhesion layer through heat-assisted bonding.Unlike standard refinishing providers, we use two bonding agents, ensuring that the new enamel coating remains securely attached for years to come.
We use an infrared low-bake system to ensure a durable, long-lasting finish and remove the masking.
Following this, we apply expert refinements, polishing, etc. to ensure a like-new appearance.
We then carefully apply a new bead of sealant so your newly resurfaced bath is protected.
Stone work surfaces can suffer minor damage around the perimeter, due to their exposed design.
The material is not supported on the open edge, and a dropped pan or utensil may cause a small section to break away.
- Stains and Discolouration Despite their resistance, certain chemicals or foods may occasionally cause lasting marks on these surfaces.
- Surface Marks and Indentations Unintentional knife marks, dropped objects, or constant usage could create minor scuffs or indentations on the worktop.
- Chipping The edges or corners, under sudden pressure, could break off slightly, disrupting the smooth finish.
