Bath Repair & Bath Resurfacing Broad-Street, Kent

Name: Bath Fixer Broad-Street, ME17
Address: Broad-Street, ME17, Kent, United Kingdom
Telephone: 0345 017 0787
Price range: ££-£££
Rating: 4.9

Need Bath Repair & Bath Resurfacing Service in Broad-Street, ME17?

Call us
0345 017 0787

Quote Request Form

Cost Effective Sink Chip Repair Broad-Street

No matter if it's a slight blemish or a heavily scratched or cracked bath, team Bath Fixer Broad-Street are equipped to perform a sink, shower, or bath chip repair and bring back the original beauty of old, cracked, or chipped surfaces with a money-saving solution instead of costly replacements.

Bathroom fixtures like basins, bathtubs, and shower trays are often damaged from accidental impacts. As a result, small fractures or chips can form, but there’s no need for a costly replacement.

Call us
0345 017 0787

How it works

Bath Repair Kent

Aged enamel-coated baths gradually turn porous and tough to scrub as the years pass.

If your bath reaches this stage, it’s time for Bath Fixer Broad-Street’s specialists to conduct our professional reglazing service.

Acrylic baths after years of wear start to discolour, which can make your entire bathroom appear outdated.

If you’re looking for a professional restoration for an enamel bath or a crack repair for an acrylic bath, our team at Bath Fixer Broad-Street, your like-new bath surface will maintain its quality flawless for years to come.
The professionals at Bath Fixer Broad-Street can restore the visual appeal of your bathtub at a fraction of the cost with our specialized bathtub refinishing and restoration.

Refinishing offers the most cost-effective way for a wide range of tubs, be it modern acrylic tubs and traditional enamel-coated bathtubs to cast iron and fiberglass tubs.

Our specialist process is suitable for any bath type, allowing us to carry out work on any type of bathroom suite.

For acrylic tub restoration to cast iron bath resurfacing, the completed work will have your worn-out bathtub looking pristine and modern.

The Kent-wide bathtub refinishing service we offer have enabled homeowners cut costs by over 60% instead of purchasing a brand-new bath.

Through reglazing, we eliminate surface damage and blemishes, and coat it with a long-lasting protective layer for an immaculate finish.

Shower Tray Resurfacing Broad-Street

Many homeowners opt for shower trays for their budget-friendly nature and ease of installation, providing a efficient solution for space-conscious bathrooms.

Over extended periods, wear and tear can take its toll, causing them to appear aged and hard to clean.

Bath Fixer Broad-Street offers the perfect solution, saving you from the cost and inconvenience of replacing your shower trays.

Our team of experts in Broad-Street specialize in high-quality and dependable repairs, guaranteeing that your shower surface are restored to their former glory.

Be it cracks, fading, or surface damage, we have the skills and tools to repair and resurface any imperfections, leaving your shower trays looking shiny and brand new.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

Acrylic Tub Repair in Broad-Street

Your trusted professionals at Bath Fixer Kent are specialists in acrylic bath repair, fixing cracks and damage in shower trays, full ceramic sink resurfacing, bath re-enamelling, and hard surface repairs.

Acrylic tubs are relatively delicate and are susceptible to damage from falling tiles during tiling. In some cases a shower guard to dislodge and scratch or gouge the bath. The bath’s edge can be split if too much weight is put on it or is leveraged when accessing the plumbing. Often, an acrylic bath sustains damage before installation.

No matter the damage, we have the skills to repair it.

Give us a ring, or submit a service request, or send us pictures via WhatsApp or SMS, and we’ll let you know the best solution.

How We Carry Out Bath Resurfacing and Re-Enamelling

Upon arrival, we lay protective sheets on the floor, toilet, sink, heating units, and any exposed surfaces.

We professionally clean the surface using industry-approved solutions and remove any rotten silicone around the bath.

Our experts fix all types of damage, covering small fractures and surface chips, scratches, mineral deposits, and faded, thin enamel layers. If the base of your bath has cracks or holes, we restore it professionally.

We mask off the wall tiles, bathroom walls, taps, drain opening, and spillover outlet by applying precision masking to avoid any coating residue.

We work with a special cleaning solvent to get rid of any grease, surface contaminants, impurities and stains.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

Then we spray on the extra bonding solution with a hot air gun.Where others may stop at one bonding layer, we use two bonding agents, so the enamel surface we spray on firmly adheres for long-lasting results.

We apply an infrared low-bake system to harden and set the fresh enamel coating and take off the protective coverings.

After that, we apply expert refinements, polishing, etc. to deliver a pristine, professional-grade outcome.

As a finishing step, we seal with a high-quality sealing layer so it is ready for use.

Granite Worktop Damage Repair Services Broad-Street, Kent

Stone work surfaces may sustain chips at the corners, due to their exposed design.

The material is not supported on the open edge, and an impact from a heavy item could result in a noticeable chip.

Surface Staining and Fading Although they are stain-resistant, various harsh products have the potential to leave stubborn discoloration on these surfaces.
Surface Marks and Indentations Unintentional knife marks, heavy impacts, or regular wear and tear may cause minor scuffs or shallow marks on the worktop.
Chipping The most exposed areas, under sudden pressure, are prone to minor fractures, compromising the worktop’s seamless look.

Fix Your Worktop Today! — Contact Us Now!

Get in touch with the Kent team for cost-effective solutions and expert advice.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in Kent rave about our expert bath repair and bath resurfacing services.

Good communication:

Great communication with a timely arrival. He provided a thorough explanation and got to work right away. He carefully masked all surrounding areas and put in a lot of effort. He cleaned up thoroughly, and we’re thrilled with the outcome—the bath looks fantastic! - David E, Kent

Very Professional

Ilia provided top-notch service — was meticulous, friendly, and ensured a perfect finish. Highly recommend Ilia and Bath Fixer —Sarah W., from Broad-Street in Kent

Timely and Transparent

Brilliant service. Scheduled on Monday, and Ilia showed up on time Wednesday to restore my damaged acrylic bath. Everything was handled professionally and smoothly. The repair is practically invisible thanks to the expert colour matching. Would not hesitate in recommending both the company & Ilia. — Trent D., Kent

Reliable uPVC Door Resurfacing

Bath Fixer Broad-Street specialists, we prioritize preserving the look and durability of your modern uPVC door surfaces.

Our expert repair techniques includes colour and texture matching, making the restoration undetectable with the rest of the panel.

We remove debris and smooth out the flaws, meticulously filling and smoothing imperfections.

Handling both light blemishes and major breaks, our expertise delivers a budget-friendly, long-lasting, and practical fix to buying a brand-new uPVC door.

Looking to find out if we work in your region?

Check out our service area map or see the full list of locations we serve.

Top FAQs About What We Offer

Bath resurfacing can frequently save you around 60% on the cost of installing a new bathtub.

You may choose to switch your enamel bath for a budget-friendly plastic tub, but this means sacrificing an premium-quality item for a far inferior and weaker bath.

Definitely. Our high-quality formula is suitable for tubs, sinks, standalone basins, and even ceramic surfaces.

We would however recommend that the WC is upgraded, as a result of the harsh cleaning process. Toilet brushes and harsh cleaners could reduce the lifespan of the finish.

You can resurface your entire bathroom setup in any finish you desire.

We primarily encounter kits that failed to deliver the expected finish – which may give us a certain perspective – plus, we recognize the superior outcome between the use of a kit and the expert finish we provide.

While some common bathroom issues are OK to DIY, for example, removing a drain clog, most are best left to professionals.

With our trained eye, we to detect hidden issues before they escalate.

In the production process of cast iron and steel baths, it is covered in an extremely hard and durable layer of enamel.

This enamel coating is thermally bonded to the tub in an intense heating process and solidifies as it cools to leave a smooth glossy surface.

Of course! We will routinely repair any imperfections as part of the restoration treatment, yet, if your bath has minor surface damage on an otherwise well-maintained bath, we offer a targeted fix.

We get many calls from people who have dropped tiles, solid fixtures, or random household items into the bath and chipped the surface.

If this has happened to you, there’s no need to stress, we can fix it quickly!