The experts at Bath Fixer Kent specialize in acrylic bath repair, fixing cracks and damage in shower trays, chip and crack repair for sinks, durable bath refinishing, and hard surface repairs.
Acrylic tubs are relatively delicate and can be affected from tiling mishaps. Sometimes a shower door to fall and scratch or gouge the bath. The bath’s edge can snap if undue force is exerted or is leveraged when accessing the plumbing. Often, an bathtub suffers nicks and scratches while stored.
No matter the damage, we can provide a professional solution.
Reach out to us, or send us a quick message, or message us with a few photos, and we’ll assess the damage.
Once on-site, our team dust sheet the floor, lavatory, basin, radiators, and key sections of the bathroom.
We thoroughly clean the bath with specific cleaners and eliminate old, degraded sealant.
We handle all bath surface repairs, including chips in the bath, cosmetic imperfections, limescale, and faded, thin enamel layers. If there are holes or damage at the bottom of the bath, we reinforce and fix it completely.
We mask off the tiles, bathroom walls, taps, waste, and overflow with masking to prevent spray getting on these.
We use a high-strength degreasing solution to remove grimy deposits, surface contaminants, etc..
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Next, we apply the extra bonding solution using high-temperature application.In contrast to many resurfacing services, we apply an extra adhesion layer, so the enamel surface we spray on remains securely attached for years to come.
Our team utilizes an infrared low-bake system to cure the new enamel and unveil the fully restored bath.
Following this, we perfect the final details, polishing, etc. to achieve an impeccable result.
As a finishing step, we seal with a fresh silicone seal so your bath is fully usable.
Stone work surfaces are prone to chipping along the edges, since this is where they are weakest.
The unsupported edges make them more fragile, and a dropped pan or utensil might lead to minor surface damage.
- Persistent Marks and Discoloration Despite their resistance, some substances and spills have the potential to leave stubborn discoloration on these surfaces.
- Surface Marks and Indentations Minor surface abrasions, strong collisions, or everyday activities might lead to faint abrasions or indentations on the worktop.
- Chipping Perimeter sections, if hit with force, could break off slightly, affecting its flawless appearance.
