Bath Fixer Kent are specialists in acrylic bathtub restoration, shower tray refinishing, chip and crack repair for sinks, bath re-enamelling, and long-lasting surface restoration.
Acrylic baths are quite soft and may incur damage from impact from loose tiles. Occasionally a shower screen to slip and dig into the surface. The bath’s edge can crack if excessive pressure is applied or it is put under pressure when removing the panel. Many times, an acrylic tub gets harmed during transportation.
Regardless of the issue, chances are we can fix it.
Call us, or fill in an enquiry form, or message us with a few photos, and we can advise.
Arrive and lay protective sheets on the flooring, commode, basin, warming appliances, and any exposed surfaces.
We professionally clean the surface with specific cleaners and remove any rotten silicone around the bath.
We restore and fix imperfections, covering minor cracks and chipped enamel, cosmetic imperfections, limescale, and erosion caused by minerals in water. For major wear and damage on the tub’s bottom, we restore it professionally.
We safeguard the bathroom tiles, bathroom walls, faucets, bath drain, and overflow using protective masking tape to avoid any coating residue.
Our team applies a high-strength degreasing solution to remove stubborn grease buildup, dirt, any remaining debris.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
We proceed by spraying the additional adhesion layer using high-temperature application.Unlike standard refinishing providers, our process includes a double-bonding system, so the enamel surface we spray on remains securely attached for years to come.
We apply an infrared low-bake system to ensure a durable, long-lasting finish and clear away all masking materials.
Following this, we apply expert refinements, ensuring a flawless, mirror-like finish to make sure it’s perfect.
Finally, we apply a new bead of sealant so the surface is watertight and secure.
Stone work surfaces can be chipped around the perimeter, since this is where they are weakest.
The unsupported edges make them more fragile, and an impact from a heavy item can clip it and knock a bit off.
- Surface Staining and Fading While these surfaces are built to last, various harsh products might result in deep-set stains on these surfaces.
- Surface Marks and Indentations Unintentional knife marks, dropped objects, or constant usage might lead to faint abrasions or dents on the worktop.
- Chipping The most exposed areas, if hit with force, can chip, compromising the worktop’s seamless look.
