From light wear and tear to a severely worn bathtub, team Bath Fixer Conyer can carry out a full surface restoration for baths, showers, and sinks and recondition worn-out bathroom fixtures through a affordable solution instead of costly replacements.
Basin, bath, or shower tray surfaces frequently suffer wear and tear due to dropping items on the surface. This can cause the surface to crack or chip, however, replacing your entire fixture isn’t necessary.
Our team has years of expertise in repairing hard surfaces, focusing on:
Baths Repair
Wood Flooring Repair
Cupboard Doors Repair
Wooden Worktops Repair
Glass Repair Repair
What Makes Bath Fixer Unique?
Bath Fixer technicians are trained to deliver expert damage repair solutions covering all types of doors, wooden, laminate, and tiled floors, worktops, bathtubs, fiberglass and acrylic shower trays, wall and floor tiles, UPVC and wooden window frames, furniture, and so much more across ME9.
Bath Repair Kent
Old enamel baths can become rough and difficult to clean due to wear and tear.
Once this occurs, it’s time for Bath Fixer Conyer’s specialists to carry out our professional reglazing service.
Fiberglass or acrylic baths as they age lose their original shine, thus making your bathroom look tired.
If you’re looking for a full reglazing of your enamel tub or a full resurfacing for an acrylic fixture, the resurfacing experts at Bath Fixer Conyer, your beautifully restored bathtub will continue looking in excellent condition for many more years.
Our specialists at Bath Fixer Conyer can rejuvenate the aesthetics of your bathtub at a fraction of the cost with our expert bathtub refinishing and restoration.
Resurfacing is a perfect solution for any type of bathtub, whether it's acrylic and enamel-finished tubs to vintage cast iron bathtubs and fibreglass.
Our professional resurfacing system is designed for various bath surfaces, allowing us to carry out work all types of tubs and fixtures.
Whether fixing acrylic tubs to refinishing cast iron bathtubs, the end product will have your aged tub looking pristine and modern.
Our professional bath reglazing solutions across Kent have enabled homeowners reduce expenses by more than 60% by avoiding a full bathtub installation.
Through reglazing, all marks and imperfections are removed, and coat it with a long-lasting protective layer for an ultra-smooth surface.
Shower Tray Resurfacing Conyer
Many homeowners opt for shower trays for their cost-effectiveness and practicality, providing a practical option for space-conscious bathrooms.
However, over time, daily use can cause visible damage, causing them to appear aged and challenging to keep in good condition.
Here’s where our specialists at Bath Fixer Conyer can help, saving you from the cost and inconvenience of replacing your shower trays.
The trusted experts at Conyer is dedicated to providing reliable and efficient service, ensuring that your shower trays look as good as new.
From minor scratches to deep chips and stubborn stains, we come fully prepared with the right techniques to repair and resurface any imperfections, ensuring a polished, like-new finish.
What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.
FREE Quote
Request Form
Acrylic Bath Repair Conyer
Bath Fixer Kent specialists offer professional services in fixing damaged acrylic baths, shower tray refinishing, seamless sink refinishing, professional bath resurfacing, and hard surface repairs.
Acrylic bathtubs have a softer surface and may incur damage from tiling mishaps. At times a loose shower screen to move and dig into the surface. The bath’s edge can fracture if undue force is exerted or is stressed when removing the panel. Frequently, an acrylic tub gets harmed during transportation.
No matter the damage, we can provide a professional solution.
Get in touch by phone, or submit a service request, or message us with a few photos, and our team will provide expert guidance.
How We Carry Out Bath Resurfacing and Re-Enamelling
Upon arrival, we dust sheet the floor, toilet, washbasin, heating units, and major fixtures.
We professionally clean the surface with high-quality bath-safe products and remove any rotten silicone around the bath.
Our experts fix all types of damage, covering bathtub chips, cosmetic imperfections, hard water stains, and worn away enamel from hard water. For major wear and damage on the tub’s bottom, our specialists will ensure a flawless finish.
We cover the tiles, walls, water outlets, drain area, and overflow drain with specialized covering materials to keep them clean and untouched.
We utilize a specialized surface cleaner to dissolve and lift oil residues, dust and particles, impurities and stains.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Then we spray on the extra bonding solution with a hot air gun.Unlike other bath re-enamelling companies, we apply an extra adhesion layer, allowing the reglazed bath firmly adheres for long-lasting results.
Our team utilizes an professional-grade heat-curing process to cure the new enamel and unveil the fully restored bath.
We then do any detailed finishing touches, polishing, etc. to make sure it’s perfect.
As a finishing step, we seal with a high-quality sealing layer so your newly resurfaced bath is protected.
Expert Granite Surface Repair Conyer, Kent
Granite kitchen tops may sustain chips along the edges, because this area lacks structural support.
The material is not supported on the open edge, and a forceful hit from cookware could result in a noticeable chip.
Persistent Marks and Discoloration Even though they are highly durable, certain chemicals or foods can sometimes leave persistent stains on these surfaces.
Scratches and Dents Accidental cuts, strong collisions, or constant usage may cause minor scuffs or small depressions on the worktop.
Edge Damage The most exposed areas, if subjected to hard knocks, could break off slightly, disrupting the smooth finish.
Don’t Wait, Repair Your Worktop Now! — Get in Touch!
Get in touch with the Kent team for budget-friendly repairs and free tips.
Hundreds of satisfied clients in Kent rave about our expert bath repair and bath resurfacing
services.
Good communication:
Excellent communication and arrived on time.
He clearly explained each step and began the work immediately.
He took great care in masking everything up and worked very hard.
He left everywhere clean and tidy and we are very happy with the result, the bath looks great.
- David E, Kent
Very Professional
Ilia delivered excellent results — handled everything with care, professionalism, and delivered stunning results.
Highly recommend Ilia and Bath Fixer
—Sarah W., from Conyer in Kent
Timely and Transparent
Top-notch service.
Booked on Monday, and Ilia arrived promptly on Wednesday to repair two holes in the tub.
Everything was handled professionally and smoothly.
The colour match is spot on, making the repair virtually invisible.
Would definitely suggest Bath Fixer and Ilia for any repairs.
— Trent D. from ME9
Specialist uPVC Door Fixing
The team at Bath Fixer Conyer, we understand the importance of keeping up the aesthetic and strength of your modern uPVC door surfaces.
Our specialized fixing approach utilizes seamless tone and finish correction, allowing the fixed spots to integrate flawlessly with the rest of the surface.
We remove debris and smooth out the flaws, ensuring a smooth, even finish.
For everything from scratches to deep fractures, our specialized knowledge delivers a budget-friendly, long-lasting, and practical fix to door replacement.
Wondering if we cover your area?
Take a look at the map or review the regions we operate in.
What Customers Ask Most About Our Services
Bath resurfacing can frequently save you approximately 60% on the cost of replacing your enamel bath.
Sure, you could replace your classic enamel tub for a budget-friendly plastic tub, but this means sacrificing an premium-quality item for a less valuable and more fragile bath.
Definitely. Our material is designed to be applied to bathtubs, washbasins, sink pedestals, and even tiles.
That being said, we suggest that the WC is replaced, as a result of the regular scrubbing and chemical exposure. Frequent scrubbing and disinfectants may cause premature deterioration.
You can resurface your entire suite in any finish you desire.
We primarily encounter the repair kits that did not produce a satisfactory result – so our viewpoint is shaped by these cases – and we understand the gap in results between DIY solutions and the professional results we deliver.
While some common bathroom issues are OK to DIY, like clearing a blocked drain, most are best left to professionals.
This is due to our expertise to detect hidden issues before they escalate.
When a cast iron or pressed steel bath is made, it is protected by an highly resilient and long-lasting layer of enamel.
This specialized enamel finish is actually melted onto the bath at extreme heat levels and forms a strong and glossy finish to ensure a flawless, mirror-like finish.
Absolutely! We handle any cracks or chips as part of the resurfacing process, yet, if your bath has small chips or damage on an otherwise good surface, we have a solution.
We get many calls from people who have accidentally knocked tiles, heavy drain stoppers, or loose objects into the bath and damaged the enamel.
If this has happened to you, there’s no need to stress, our team can restore it seamlessly!
Find Out Our Availability and Get a Price Estimate
Reach out to The Bath Fixer today for a cost-free quote and to book your appointment.
