Name: Bath Fixer Cross-Keys, TN14
Address: Cross-Keys, TN14, Kent, United Kingdom
Telephone: 0345 017 0787
Price range: ££-£££
Rating: 4.9

Affordable Sink Damage Repair Cross-Keys

From light wear and tear to a heavily scratched or cracked bath, team Bath Fixer Cross-Keys can carry out a full surface restoration for baths, showers, and sinks and bring back the original beauty of worn-out bathroom fixtures through a cost-effective solution instead of costly replacements.

Basin, bath, or shower tray surfaces frequently suffer wear and tear when things are dropped onto them. Such incidents can leave noticeable damage, however, replacing your entire fixture isn’t necessary.

Call us
0345 017 0787

How it works

Bath Repair Kent

Traditional enamel bathtubs often get coarse and hard to maintain as the years pass.

If your bath reaches this stage, it’s time for the professionals at Bath Fixer Cross-Keys to conduct our tub refinishing process.

Modern acrylic tubs with frequent use begin to fade, which can make your entire bathroom appear outdated.

Whether you need a full reglazing of your enamel tub or a full resurfacing for an acrylic fixture, with Bath Fixer Cross-Keys, your refreshed and revitalized bath is guaranteed to remain flawless for years to come.
The Bath Fixer Cross-Keys team can restore the appearance of your tub at a fraction of the cost with our expert tub reglazing and repair.

Our restoration process is the best choice for a wide range of tubs, whether it's acrylic and traditional enamel-coated bathtubs to vintage cast iron bathtubs and reinforced fiberglass baths.

Our professional resurfacing system is designed for various bath surfaces, allowing us to carry out work all types of tubs and fixtures.

For acrylic tub restoration to restoring old cast iron baths, the final result will have your aged tub looking like new again.

Our professional bath reglazing solutions across Kent have allowed property owners reduce expenses by more than 60% when compared to the cost of bath replacement.

Through reglazing, scratches, stains, and dull areas are erased, and add a durable refinishing layer for an flawless, showroom-quality result.

Shower Base Refinishing Cross-Keys

People frequently select shower trays for their affordability and space-saving design, offering a practical feature for space-conscious bathrooms.

However, over time, constant exposure to water and soap can degrade them, leaving them looking worn and difficult to maintain.

That’s when Bath Fixer Cross-Keys steps in, helping you avoid unnecessary spending of buying an entirely new shower tray.

Our experienced specialists in Cross-Keys is dedicated to providing top-tier and hassle-free restorations, ensuring that your shower trays look as good as new.

No matter the level of wear and tear, our specialists use professional-grade materials to restore your shower trays flawlessly, leaving your shower trays looking shiny and brand new.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

Cross-Keys Acrylic Bathtub Restoration

Bath Fixer Kent offer professional services in acrylic bathtub restoration, professional shower tray resurfacing, ceramic sink repair, bath re-enamelling, and hard surface repairs.

Acrylic bath surfaces are not as hard as other materials and can easily be damaged from accidents during bathroom renovations. At times a shower door to fall and dig into the surface. The rim of the bathtub can crack if heavy items are placed on it or is stressed when adjusting surrounding tiles. Often, an acrylic bath sustains damage before installation.

Whatever the situation is, we can provide a professional solution.

Get in touch by phone, or send us a quick message, or WhatsApp or text us some images, and we’ll offer professional recommendations.

Bath Re-Enamelling and Bath Resurfacing Full Step-by-Step Procedure

Once on-site, our team shield the bathroom floor, lavatory, basin, warming appliances, and key sections of the bathroom.

We meticulously scrub the bath with specific cleaners and strip away moldy or damaged silicone.

We restore and fix imperfections, ranging from small fractures and surface chips, cosmetic imperfections, hard water stains, and faded, thin enamel layers. If there are holes or damage at the bottom of the bath, we restore it professionally.

We cover the wall tiles, adjacent surfaces, water outlets, waste, and bath overflow using protective masking tape to avoid any coating residue.

Our team applies a special cleaning solvent to eliminate stubborn grease buildup, surface contaminants, impurities and stains.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

Next, we apply the additional adhesion layer for maximum surface adhesion.Where others may stop at one bonding layer, we reinforce the bond with a second primer, so the enamel surface we spray on has a very strong hold to the original surface.

We apply an specialized infrared drying technology to cure the new enamel and take off the protective coverings.

We then do any detailed finishing touches, ensuring a flawless, mirror-like finish to achieve an impeccable result.

We then carefully apply a protective waterproof sealant so the surface is watertight and secure.

Granite Worktop Damage Repair Services Cross-Keys, Kent

Granite worktops are prone to chipping at the corners, due to their exposed design.

The material is not supported on the open edge, and an impact from a heavy item can clip it and knock a bit off.

Stains and Discolouration While these surfaces are built to last, various harsh products might result in deep-set stains on these surfaces.
Scuffs and Impact Damage Unintentional knife marks, heavy impacts, or daily use can result in minor scuffs or shallow marks on the worktop.
Chipping The edges or corners, if subjected to hard knocks, can chip, compromising the worktop’s seamless look.

Restore Your Worktop Instantly! — Call Now!

Speak with the Kent specialists for budget-friendly repairs and expert advice.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in Kent rave about our expert bath repair and bath resurfacing services.

Good communication:

Kept me informed and arrived as scheduled. He clearly explained each step and began the work immediately. He was meticulous in masking up and put in a lot of effort. He left no mess behind, and we’re very pleased with the final result—the bath looks brand new. - David E, Kent

Very Professional

Ilia’s work was outstanding — was efficient, courteous, clean and the job looked brilliant. Highly recommend Ilia and Bath Fixer —Sarah W., Cross-Keys, Kent

Timely and Transparent

Brilliant service. Booked on Monday, and Ilia arrived promptly on Wednesday to repair two holes in the tub. Ilia was courteous and highly efficient. You can’t even tell there was damage—the colour match is perfect! Would not hesitate in recommending both the company & Ilia. — Trent D., based in Kent

Expert uPVC Door Repair

Bath Fixer Cross-Keys specialists, we recognize the value of ensuring the longevity and condition of your vinyl-coated doors.

Our specialized fixing approach utilizes colour and texture matching, ensuring that the repaired areas blend seamlessly with the rest of the surface.

We carefully ready the surface for repairs, meticulously filling and smoothing imperfections.

Whether dealing with small marks or significant damage, our high-level craftsmanship ensures a money-saving, green, and efficient repair option to door replacement.

Want to check if our services are available near you?

Check out our service area map or see the full list of locations we serve.

Top FAQs About What We Offer

Reglazing usually save you up to 60% on the cost of installing a new bathtub.

Sure, you could replace your high-quality enamel bathtub for a modern low-cost plastic bath, but this means sacrificing an valuable and timeless bath for a less valuable and lower-value bath.

Absolutely. Our high-quality formula is engineered for use on bathtubs, washbasins, pedestals, and even wall tiles.

However, we advise that the WC is changed, this is due to the harsh cleaning process. Brushes and chemicals may cause premature deterioration.

You have the option to refinish your full bathroom suite with a custom colour.

We often come across kits that failed to deliver the expected finish – so our viewpoint is shaped by these cases – also, we know the difference in quality between DIY solutions and what we can achieve.

Although certain minor bathroom problems can be handled yourself, for example, removing a drain clog, it’s usually safer to rely on professionals.

This is due to our expertise to spot deeper concerns that could go unnoticed.

In the production process of cast iron and steel baths, it is covered in an ultra-strong and wear-resistant layer of enamel.

This enamel coating is thermally bonded to the tub at extreme heat levels and forms a strong and glossy finish to leave a smooth glossy surface.

Yes, it is. We will routinely repair any imperfections as part of the tub reglazing service, yet, if your bath has isolated chips or cracks on an otherwise undamaged enamel, we have a solution.

It’s common for homeowners to contact us who have dropped tiles, heavy drain stoppers, or random household items into the bath and chipped the surface.

No worries if you’ve experienced this, our team can restore it seamlessly!

Bath Repair Cross-Keys, Kent