From light wear and tear to a severely worn bathtub, our experts at Bath Fixer Falmer offer a sink, shower, or bath chip repair and bring back the original beauty of any damaged surface offering a money-saving solution instead of costly replacements.
Bath surfaces, sinks, and shower trays commonly experience impact damage because of heavy objects falling. These impacts may lead to cracks or chips, but don’t take this as a sign to replace the bath or basin.
We are specialists in hard surface repairs, offering expert solutions for:
Shower Trays Repair
Laminate Flooring Repair
Cupboard Doors Repair
Marble & Granite Repair
uPVC Frames Repair
What Sets Bath Fixer Apart?
The experts at Bath Fixer are fully trained to provide on-site damage repair solutions covering doors, various flooring surfaces, worktops, baths, shower trays, tiles, window sills and frames, furniture, and various additional fixtures across BN1.
Bath Resurfacing & Bath Repair East-Sussex
Traditional enamel bathtubs often get rough and difficult to clean as the years pass.
At this point, it’s time for Bath Fixer Falmer to carry out our enamel restoration treatment.
Plastic-based bathtubs with frequent use lose their original shine, thus making your bathroom look tired.
If you’re looking for an enamel bathtub refinishing or an acrylic bath repair, our team at Bath Fixer Falmer, your beautifully restored bathtub is guaranteed to remain pristine with lasting durability.
The professionals at Bath Fixer Falmer are able to revive the aesthetics of your bathtub for much less than replacement with our specialized professional resurfacing solutions.
Refinishing offers the most cost-effective way for a wide range of tubs, be it acrylic and enamel to vintage cast iron bathtubs and reinforced fiberglass baths.
Our unique refinishing method is compatible with all materials, so we can resurface and reglaze across different bath styles.
For acrylic tub restoration to restoring old cast iron baths, the final result will have your aged tub looking pristine and modern.
Our bath repair and resurfacing service in East-Sussex have allowed property owners spend less than 40% compared to buying a new one by avoiding a full bathtub installation.
Through reglazing, we eliminate surface damage and blemishes, and seal it with a high-quality enamel finish for an factory-fresh look.
Shower Tray Resurfacing Falmer
Shower bases are a popular choice for their affordability and space-saving design, providing a efficient feature for space-conscious bathrooms.
Over extended periods, daily use can cause visible damage, giving them a dull and tired look and requiring extra effort for upkeep.
Bath Fixer Falmer offers the perfect solution, eliminating the need for a pricey replacement of buying an entirely new shower tray.
Our experienced specialists in Falmer is dedicated to providing high-quality and dependable repairs, guaranteeing that your shower surface look as good as new.
Be it cracks, fading, or surface damage, our team possesses the expertise and equipment to tackle any issue, leaving your shower trays looking shiny and brand new.
What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.
FREE Quote
Request Form
Expert Acrylic Bath Resurfacing Falmer
The experts at Bath Fixer East-Sussex provide industry-leading solutions for fixing damaged acrylic baths, professional shower tray resurfacing, ceramic sink repair, bath re-enamelling, and hard surface repairs.
Acrylic baths are prone to surface damage and are susceptible to damage from falling tiles during tiling. Sometimes a loose shower screen to move and create a surface gouge. The bath’s edge can crack if too much weight is put on it or it is put under pressure when adjusting surrounding tiles. Often, an bath incurs minor dents in shipping.
No matter the damage, chances are we can fix it.
Reach out to us, or send us a quick message, or send us pictures via WhatsApp or SMS, and we can advise.
Step-by-Step Process for Professional Bath Refinishing
Arrive and cover the floor, lavatory, sink, heating units, and key sections of the bathroom.
We meticulously scrub the bath using specialized cleaning agents and get rid of deteriorated caulking around the tub.
We restore and fix imperfections, ranging from chips in the bath, surface marks, calcium buildup, and deteriorated enamel due to water exposure. Should your bathtub have structural issues, we reinforce and fix it completely.
We cover the wall tiles, walls, water outlets, drain opening, and overflow with specialized covering materials to avoid any coating residue.
Our team applies a high-strength degreasing solution to eliminate stubborn grease buildup, dirt, impurities and stains.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
We proceed by spraying the reinforcing primer using high-temperature application.Where others may stop at one bonding layer, we apply an extra adhesion layer, allowing the reglazed bath forms an ultra-durable bond.
We use an infrared low-bake system to bond the refinished surface and remove the masking.
After that, we carry out precision finishing, buffing, refining, and perfecting the surface to make sure it’s perfect.
To complete the process, we add a fresh silicone seal so your bath is fully usable.
Granite Worktop Chip Repair Falmer, East-Sussex
Granite countertops can suffer minor damage at the corners, since this is where they are weakest.
Without backing, the edges remain at risk, and a hard object like a pot can clip it and knock a bit off.
Surface Staining and Fading Despite their resistance, certain chemicals or foods have the potential to leave stubborn discoloration on these surfaces.
Surface Marks and Indentations Unintentional knife marks, strong collisions, or everyday activities can result in light surface marks or small depressions on the worktop.
Surface Chips The most exposed areas, when impacted by heavy objects, may sustain chips, disrupting the smooth finish.
Get Your Worktop Repaired Today! — Call Us Now!
Contact the experts at East-Sussex for cost-effective solutions and free tips.
Hundreds of satisfied clients in East-Sussex rave about our expert bath repair and bath resurfacing
services.
Good communication:
Good communication and a prompt arrival.
He clearly explained each step and began the work immediately.
He ensured everything was properly covered and worked diligently.
He cleaned up thoroughly, and we’re thrilled with the outcome—the bath looks fantastic!
- David E, East-Sussex
Very Professional
Ilia did a fantastic job — was efficient, courteous, clean and the job looked brilliant.
Absolutely recommend Ilia for any bath repair
—Sarah W., East-Sussex, Falmer
Timely and Transparent
Outstanding service.
Scheduled on Monday, and Ilia showed up on time Wednesday to restore my damaged acrylic bath.
The process was seamless, with friendly and efficient service.
The colour match is spot on, making the repair virtually invisible.
Absolutely would recommend Bath Fixer and Ilia to anyone.
— Trent D., based in East-Sussex
Expert uPVC Door Repair
Here at Bath Fixer Falmer, we understand the importance of maintaining the appearance and functionality of your vinyl-coated doors.
Our expert repair techniques utilizes colour and texture matching, ensuring that the repaired areas blend seamlessly with the rest of the door.
We carefully ready the surface for repairs, precisely correcting chips and dents.
From minor scuffs to larger cracks and dents, our specialized knowledge offers an affordable, eco-friendly, and hassle-free solution to buying a brand-new uPVC door.
Curious to see if we operate in your location?
Check out our service area map or browse through our service areas.
Your Questions Answered: Our Services
Bath resurfacing can frequently save you up to 60% on the cost of installing a new bathtub.
Sure, you could replace your vintage enamel bath for a modern low-cost plastic bath, but this means sacrificing an premium-quality bathtub for a far inferior and weaker bath.
Yes. Our specialized coating is designed to be applied to bathtubs, sinks, pedestals, and even wall tiles.
However, we advise that the lavatory is upgraded, as a result of the harsh cleaning process. Toilet brushes and harsh cleaners can wear down the resurfacing layer.
You have the option to refinish your entire bathroom setup to match your preferred shade.
We only see unsuccessful DIY repair attempts – so we probably have a bias on this point – as we are aware of the quality contrast when looking at at-home kits and what we can achieve.
Although certain minor bathroom problems can be handled yourself, including simple drain cleaning, many require expert attention.
With our trained eye, we to detect hidden issues before they escalate.
In the production process of cast iron and steel baths, it is covered in an extremely hard and durable layer of enamel.
This specialized enamel finish is fused onto the bath’s surface in an intense heating process and solidifies as it cools to result in a sleek, polished look.
Absolutely! We will routinely repair any damage as part of the tub reglazing service, though, if you notice small chips or damage on an otherwise undamaged enamel, our experts can repair it.
We frequently hear from customers who have accidentally knocked tiles, metal plugs, or heavy accessories into the bath and left noticeable marks.
Should this occur, rest assured, we can make it look like new again!
Get a Free Quote and Check Our Availability
Contact The Bath Fixer today for a cost-free quote and to check availability.
