Name: Bath Fixer Farthing-Corner, ME8
Address: Farthing-Corner, ME8, Kent, United Kingdom
Telephone: 0345 017 0787
Price range: ££-£££
Rating: 4.9

Affordable Sink Damage Restoration Farthing-Corner

From minor imperfections to a badly deteriorated tub, the skilled specialists at Bath Fixer Farthing-Corner are equipped to perform a seamless repair for damaged sinks, showers, and tubs and restore your bath, sink, or shower with a economical alternative to replacements and removals.

Bathroom fixtures like basins, bathtubs, and shower trays can get chipped or cracked due to dropping items on the surface. This can cause the surface to crack or chip, but that doesn’t mean you need a full replacement.

Call us
0345 017 0787

How it works

Bath Resurfacing & Bath Repair Kent

Vintage enamel tubs tend to become porous and tough to scrub over time.

Once this occurs, it’s time for our expert team at Bath Fixer Farthing-Corner to apply our tub refinishing process.

Modern acrylic tubs as they age begin to fade, which can make your entire bathroom appear outdated.

If you’re looking for an enamel bath resurface or an acrylic bath repair, with Bath Fixer Farthing-Corner, your like-new bath surface will maintain its quality pristine with lasting durability.
Our specialists at Bath Fixer Farthing-Corner can restore the look of your bath for much less than replacement with our high-quality bath resurfacing and repair service.

Refinishing offers the most cost-effective way for any type of bathtub, be it modern acrylic tubs and traditional enamel-coated bathtubs to classic cast iron tubs and fibreglass.

Our unique refinishing method is compatible with all materials, allowing us to carry out work across different bath styles.

Be it repairing acrylic bathtubs to refinishing cast iron bathtubs, the final result will have your old bath looking spotless and refreshed.

Our professional bath reglazing solutions across Kent have saved our clients save more than 60 percent of the cost versus completely replacing the tub.

With resurfacing, scratches, stains, and dull areas are erased, and apply a new surface coating for an factory-fresh look.

Shower Tray Repair and Resurfacing Farthing-Corner

Many homeowners opt for shower trays for their cost-effectiveness and space-saving design, serving as a efficient choice for bathroom renovations.

But as the years go by, daily use can cause visible damage, leaving them looking worn and hard to clean.

That’s when Bath Fixer Farthing-Corner steps in, helping you avoid unnecessary spending of installing a brand-new shower base.

Our experienced specialists in Farthing-Corner focus on offering reliable and efficient service, guaranteeing that your shower surface regain their original shine.

From minor scratches to deep chips and stubborn stains, our specialists use professional-grade materials to handle all types of damage, ensuring a polished, like-new finish.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

Professional Acrylic Bath Fixing Farthing-Corner

Bath Fixer Kent specialize in fixing damaged acrylic baths, acrylic shower tray repair, seamless sink refinishing, durable bath refinishing, and hard surface repairs.

Acrylic baths are quite soft and are vulnerable to harm from accidents during bathroom renovations. Occasionally a shower door to fall and dig into the surface. The perimeter of the tub can break if it bears too much weight or is stressed when adjusting surrounding tiles. In several instances, an acrylic tub gets harmed during transportation.

Whatever the problem may be, we can provide a professional solution.

Reach out to us, or complete our online contact form, or WhatsApp or text us some images, and we’ll let you know the best solution.

How We Carry Out Bath Resurfacing and Re-Enamelling

Arrive and shield the ground surface, lavatory, sink, heating units, and major fixtures.

Our team deep cleans the bathtub using specialized cleaning agents and eliminate old, degraded sealant.

We repair any damage, ranging from minor cracks and chipped enamel, cosmetic imperfections, hard water stains, and faded, thin enamel layers. For major wear and damage on the tub’s bottom, our specialists will ensure a flawless finish.

We cover the bathroom tiles, walls, faucets, drain opening, and overflow using protective masking tape to prevent spray getting on these.

We utilize a special cleaning solvent to get rid of grimy deposits, accumulated grime, etc..

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

Following that, we coat the surface with the second bonding agent for maximum surface adhesion.Where others may stop at one bonding layer, we use two bonding agents, ensuring that the new enamel coating firmly adheres for long-lasting results.

We employ an advanced infrared curing method to bond the refinished surface and take off the protective coverings.

Next, our experts do any detailed finishing touches, bringing out a smooth, high-gloss effect to achieve an impeccable result.

We then carefully apply a new bead of sealant so it is ready for use.

Granite Worktop Chip Repair Farthing-Corner, Kent

Granite kitchen tops may sustain chips on their edges, due to their exposed design.

The material is not supported on the open edge, and a dropped pan or utensil might lead to minor surface damage.

Stains and Discolouration Although they are stain-resistant, some substances and spills might result in deep-set stains on these surfaces.
Scuffs and Impact Damage Unintentional knife marks, dropped objects, or constant usage can result in minor scuffs or indentations on the worktop.
Edge Damage The most exposed areas, when impacted by heavy objects, may sustain chips, compromising the worktop’s seamless look.

Restore Your Worktop Instantly! — Call Now!

Speak with the Kent specialists for high-quality service at great prices and expert advice.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in Kent rave about our expert bath repair and bath resurfacing services.

Good communication:

Kept me informed and arrived as scheduled. He provided a thorough explanation and got to work right away. He carefully masked all surrounding areas and put in a lot of effort. He left no mess behind, and we’re very pleased with the final result—the bath looks brand new. - David E, Kent

Very Professional

Ilia delivered excellent results — was efficient, courteous, clean and the job looked brilliant. Highly recommend Ilia and Bath Fixer —Sarah W., from Farthing-Corner in Kent

Timely and Transparent

Outstanding service. Phoned on Monday & Ilia arrived on Wednesday at the appointed time to repair 2 holes in acrylic bath. Everything was handled professionally and smoothly. You can’t even tell there was damage—the colour match is perfect! Would definitely suggest Bath Fixer and Ilia for any repairs. — Trent D. – Kent

Specialist uPVC Door Fixing

Here at Bath Fixer Farthing-Corner, we know how crucial it is to keeping up the aesthetic and strength of your modern uPVC door surfaces.

Our specialized fixing approach involves colour and texture matching, making the restoration undetectable with the rest of the panel.

We thoroughly treat and prime the affected section, precisely correcting chips and dents.

Handling both light blemishes and major breaks, our high-level craftsmanship delivers a budget-friendly, long-lasting, and practical fix to full door replacement.

Want to check if our services are available near you?

Check out our service area map or our list of covered regions.

Frequently Asked Questions About Our Services

Refinishing your bath can typically save you approximately 60% on the cost of replacing your enamel bath.

Of course, you can easily swap your high-quality enamel bathtub for a modern low-cost plastic bath, but you’ll trade off an premium-quality fixture for a much lower-quality and lower-value bath.

Of course. Our specialized coating is formulated to adhere to tubs, sinks, standalone basins, and even tiles.

That being said, we suggest that the WC is swapped out, owing to the nature of cleaning a toilet. Abrasive tools and strong cleaning agents will damage the coating material over time.

You have the option to refinish your complete set of fixtures with a custom colour.

We only see cases where repair kits didn’t work well – so our viewpoint is shaped by these cases – and we understand the gap in results when looking at at-home kits and what we can achieve.

While some common bathroom issues are OK to DIY, including simple drain cleaning, many require expert attention.

Our knowledge allows us to identify underlying problems that may not be obvious.

In the production process of cast iron and steel baths, it is covered in an ultra-strong and wear-resistant layer of enamel.

This hard-glazed enamel surface is actually melted onto the bath in an intense heating process and hardens during cooling to result in a sleek, polished look.

Absolutely! We automatically fix any damage as part of the tub reglazing service, but if you have small chips or damage on an otherwise well-maintained bath, our experts can repair it.

We frequently hear from customers who have dropped tiles, heavy drain stoppers, or loose objects into the bath and chipped the surface.

If this has happened to you, there’s no need to stress, our team can restore it seamlessly!

Bath Repair Farthing-Corner, Kent