Our team at Bath Fixer Kent specialize in fixing damaged acrylic baths, shower tray refinishing, ceramic basin restoration, bathtub reglazing, and resurfacing solid bath fixtures.
Acrylic baths are prone to surface damage and are vulnerable to harm from tiling mishaps. In some cases a glass partition to shift and create a surface gouge. The bath’s edge can crack if undue force is exerted or is leveraged when installing new fixtures. Frequently, an bath incurs minor dents in shipping.
Whatever the problem may be, we have the skills to repair it.
Give us a ring, or complete our online contact form, or WhatsApp or text us some images, and we can advise.
Once on-site, our team dust sheet the flooring, commode, washbasin, radiators, and any exposed surfaces.
We meticulously scrub the bath with high-quality bath-safe products and strip away moldy or damaged silicone.
We repair any damage, including minor cracks and chipped enamel, abrasions, hard water stains, and faded, thin enamel layers. If there are holes or damage at the bottom of the bath, we reinforce and fix it completely.
We safeguard the surrounding tiles, bathroom walls, taps, drain area, and bath overflow with masking to ensure no overspray affects them.
We use a special cleaning solvent to dissolve and lift grimy deposits, accumulated grime, impurities and stains.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Then we spray on the reinforcing primer through heat-assisted bonding.Unlike other bath re-enamelling companies, we use two bonding agents, so the refinished surface has a very strong hold to the original surface.
We employ an specialized infrared drying technology to harden and set the fresh enamel coating and take off the protective coverings.
After that, we carry out precision finishing, buffing, refining, and perfecting the surface to ensure a like-new appearance.
Finally, we apply a high-quality sealing layer so it is ready for use.
Stone work surfaces can be chipped at the corners, as this is the most vulnerable point.
Without backing, the edges remain at risk, and an impact from a heavy item can clip it and knock a bit off.
- Stains and Discolouration While these surfaces are built to last, various harsh products may occasionally cause lasting marks on these surfaces.
- Surface Marks and Indentations Unintentional knife marks, heavy impacts, or constant usage may cause faint abrasions or dents on the worktop.
- Edge Damage Perimeter sections, if hit with force, may sustain chips, compromising the worktop’s seamless look.
