Name: Bath Fixer Kingswood, KT20
Address: Kingswood, KT20, Surrey, United Kingdom
Telephone: 0345 017 0787
Price range: ££-£££
Rating: 4.9

Cost Effective Bath Chip Restoration Kingswood

No matter if it's a slight blemish or a severely worn bathtub, team Bath Fixer Kingswood specialize in a professional chip repair for sinks, showers, and baths and revive your bath, sink, or shower offering a economical solution instead of costly replacements.

Bathroom fixtures like basins, bathtubs, and shower trays are often damaged because of heavy objects falling. These impacts may lead to cracks or chips, however, replacing your entire fixture isn’t necessary.

Call us
0345 017 0787

How it works

Bath Resurfacing Surrey

Old enamel baths gradually turn porous and tough to scrub due to wear and tear.

Once this occurs, it’s time for Bath Fixer Kingswood’s specialists to perform our enamel restoration treatment.

Modern acrylic tubs over time lose their original shine, reducing the aesthetic appeal of your bath.

Be it an an enamel bathtub refinishing or a full resurfacing for an acrylic fixture, trust Bath Fixer Kingswood to deliver, your like-new bath surface will maintain its quality in excellent condition with lasting durability.
Our specialists at Bath Fixer Kingswood are able to revive the visual appeal of your bathtub for a fraction of the price with our expert tub reglazing and repair.

Our restoration process is the best choice for a wide range of tubs, including acrylic and traditional enamel-coated bathtubs to vintage cast iron bathtubs and reinforced fiberglass baths.

Our unique refinishing method is compatible with all materials, allowing us to carry out work on any type of bathroom suite.

For acrylic tub restoration to refinishing cast iron bathtubs, the end product will have your worn-out bathtub looking like new again.

The Surrey-wide bathtub refinishing service we offer have enabled homeowners reduce expenses by more than 60% when compared to the cost of bath replacement.

Through reglazing, all marks and imperfections are removed, and apply a new surface coating for an flawless, showroom-quality result.

Shower Tray Repair and Resurfacing Kingswood

Many homeowners opt for shower trays for their affordability and ease of installation, providing a efficient choice for bathroom design.

Over extended periods, wear and tear can take its toll, causing them to appear aged and hard to clean.

This is where the expertise of Bath Fixer Kingswood comes into play, eliminating the need for a pricey replacement of buying an entirely new shower tray.

Our experienced specialists in Kingswood focus on offering trustworthy and prompt solutions, ensuring that your shower trays return to pristine condition.

From minor scratches to deep chips and stubborn stains, our specialists use professional-grade materials to tackle any issue, giving your shower a smooth, refreshed appearance.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

Acrylic Tub Repair in Kingswood

Your trusted professionals at Bath Fixer Surrey are experts in acrylic bath repair, fixing cracks and damage in shower trays, ceramic basin restoration, professional bath resurfacing, and long-lasting surface restoration.

Acrylic baths are quite soft and are susceptible to damage from tiling mishaps. In some cases a shower guard to dislodge and leave a deep mark. The bath’s edge can snap if too much weight is put on it or it is put under pressure when accessing the plumbing. It’s common for, an bath incurs minor dents in shipping.

Whatever the situation is, we have the skills to repair it.

Get in touch by phone, or complete our online contact form, or WhatsApp or text us some images, and we’ll offer professional recommendations.

How We Carry Out Bath Resurfacing and Re-Enamelling

Once on-site, our team dust sheet the floor, toilet, sink, warming appliances, and major fixtures.

We thoroughly clean the bath with specific cleaners and eliminate old, degraded sealant.

We repair any damage, ranging from chips in the bath, surface marks, hard water stains, and worn away enamel from hard water. Should your bathtub have structural issues, we reinforce and fix it completely.

Our team carefully protects the wall tiles, vertical surfaces, bathroom fixtures, drain opening, and spillover outlet with masking to keep them clean and untouched.

Our team applies a special cleaning solvent to eliminate stubborn grease buildup, accumulated grime, any remaining debris.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

Next, we apply the additional adhesion layer with a hot air gun.Where others may stop at one bonding layer, we apply an extra adhesion layer, so the enamel surface we spray on firmly adheres for long-lasting results.

Our team utilizes an professional-grade heat-curing process to bond the refinished surface and take off the protective coverings.

Following this, we do any detailed finishing touches, bringing out a smooth, high-gloss effect to ensure a like-new appearance.

As a finishing step, we seal with a protective waterproof sealant so it is ready for use.

Expert Granite Surface Repair Kingswood, Surrey

Granite countertops may sustain chips at the corners, as this is the most vulnerable point.

Without backing, the edges remain at risk, and an impact from a heavy item may cause a small section to break away.

Persistent Marks and Discoloration While these surfaces are built to last, some substances and spills might result in deep-set stains on these surfaces.
Surface Marks and Indentations Minor surface abrasions, forceful blows, or constant usage might lead to superficial scratches or small depressions on the worktop.
Surface Chips Perimeter sections, when impacted by heavy objects, are prone to minor fractures, diminishing its aesthetic appeal.

Get Your Worktop Repaired Today! — Call Us Now!

Contact the Surrey team for high-quality service at great prices and professional guidance.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in Surrey rave about our expert bath repair and bath resurfacing services.

Good communication:

Great communication with a timely arrival. He provided a thorough explanation and got to work right away. He carefully masked all surrounding areas and put in a lot of effort. He made sure the area was clean before leaving, and we’re delighted with the results—our bath looks amazing! - David E, Surrey

Very Professional

Ilia’s work was outstanding — worked efficiently, was polite, tidy, and the outcome was flawless. Highly recommend Ilia and Bath Fixer —Sarah W., Surrey, Kingswood

Timely and Transparent

Outstanding service. Scheduled on Monday, and Ilia showed up on time Wednesday to restore my damaged acrylic bath. Service was polite & efficient. The colour match is spot on, making the repair virtually invisible. Would definitely suggest Bath Fixer and Ilia for any repairs. — Trent D. in Surrey

Reliable uPVC Door Resurfacing

At Bath Fixer Kingswood, we recognize the value of keeping up the aesthetic and strength of your vinyl-coated doors.

Our expert repair techniques utilizes accurate shade and texture adjustment, ensuring that the repaired areas blend seamlessly with the rest of the structure.

We carefully ready the surface for repairs, ensuring a smooth, even finish.

For everything from scratches to deep fractures, our professional skills ensures a money-saving, green, and efficient repair option to buying a brand-new uPVC door.

Wondering if we cover your area?

Check out our service area map or review the regions we operate in.

Top FAQs About What We Offer

Bath resurfacing can frequently save you approximately 60% on the cost of buying a replacement bath.

Sure, you could replace your enamel bath for a mass-produced acrylic bath, but you’d be giving up an highly desirable item for a less valuable and more fragile bath.

Absolutely. Our resurfacing solution is suitable for tubs, basins, sink pedestals, and even wall tiles.

Although, we do recommend that the toilet is upgraded, this is due to the regular scrubbing and chemical exposure. Abrasive tools and strong cleaning agents could reduce the lifespan of the finish.

You can restore your entire bathroom setup with a custom colour.

We only see kits that failed to deliver the expected finish – so our viewpoint is shaped by these cases – as we are aware of the quality contrast when comparing a DIY repair kit and what we can achieve.

Some bathroom fixes, like unclogging a drain, can be DIY-friendly, such as unclogging a drain, it’s often wiser to call in the pros.

That’s because we have the experience to detect hidden issues before they escalate.

When a traditional metal bath is produced, it is finished with an ultra-strong and wear-resistant layer of enamel.

This hard-glazed enamel surface is actually melted onto the bath through a controlled melting process and hardens during cooling to create a shiny, glass-like effect.

Of course! We handle any surface flaws as part of the restoration treatment, however, if there are minor surface damage on an otherwise well-maintained bath, our experts can repair it.

It’s common for homeowners to contact us who have had loose tiles fall, chrome plugs, or random household items into the bath and left noticeable marks.

If this has happened to you, there’s no need to stress, it is easily repaired!

Bath Repair Kingswood, Surrey