From minor imperfections to a heavily scratched or cracked bath, the skilled specialists at Bath Fixer Longfield-Hill specialize in a sink, shower, or bath chip repair and bring back the original beauty of old, cracked, or chipped surfaces offering a money-saving way to avoid full bathtub replacement.
Basin, bath, or shower tray surfaces are often damaged from accidental impacts. Such incidents can leave noticeable damage, but that doesn’t mean you need a full replacement.
We are specialists in hard surface repairs, offering expert solutions for:
Basin Repairs
Laminate Flooring Repair
Cabinet Repair
Wooden Worktops Repair
Wooden Frames Repair
What Makes Bath Fixer Unique?
We at Bath Fixer are equipped to perform professional hard surface repairs for doors, floors, worktops, enamel and acrylic tubs, fiberglass and acrylic shower trays, wall and floor tiles, window sills and frames, wood and composite furniture, and so much more in DA3.
Bath Resurfacing Kent
Aged enamel-coated baths gradually turn coarse and hard to maintain over time.
If your bath reaches this stage, it’s time for the professionals at Bath Fixer Longfield-Hill to perform our enamel restoration treatment.
Plastic-based bathtubs after years of wear start to discolour, thus making your bathroom look tired.
Whether you need a full reglazing of your enamel tub or a full resurfacing for an acrylic fixture, trust Bath Fixer Longfield-Hill to deliver, your beautifully restored bathtub is ensured to stay pristine for many more years.
Our specialists at Bath Fixer Longfield-Hill can restore the look of your bathtub at a fraction of the cost with our exclusive professional resurfacing solutions.
Our restoration process is the best choice for any type of bathtub, ranging from modern acrylic tubs and enamel to cast iron and reinforced fiberglass baths.
Our unique refinishing method is suitable for any bath type, allowing us to carry out work on any type of bathroom suite.
From acrylic bath repairs to cast iron bath resurfacing, the final result will have your old bath looking like new again.
Our professional bath reglazing solutions across Kent have saved our clients reduce expenses by more than 60% by avoiding a full bathtub installation.
Through reglazing, scratches, stains, and dull areas are erased, and coat it with a long-lasting protective layer for an immaculate finish.
Shower Base Refinishing Longfield-Hill
Shower bases are a popular choice for their affordability and ease of installation, delivering a efficient feature for bathroom layouts.
However, over time, daily use can cause visible damage, causing them to appear aged and requiring extra effort for upkeep.
This is where the expertise of Bath Fixer Longfield-Hill comes into play, saving you from the cost and inconvenience of undergoing a full shower tray replacement.
Our experienced specialists in Longfield-Hill focus on offering trustworthy and prompt solutions, restoring your shower trays are restored to their former glory.
No matter the level of wear and tear, our team possesses the expertise and equipment to repair and resurface any imperfections, ensuring a polished, like-new finish.
What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.
FREE Quote
Request Form
Professional Acrylic Bath Fixing Longfield-Hill
Bath Fixer Kent specialists provide industry-leading solutions for acrylic bath repair, restoring acrylic shower trays, chip and crack repair for sinks, professional bath resurfacing, and long-lasting surface restoration.
Acrylic baths are quite soft and can easily be damaged from impact from loose tiles. In some cases a shower guard to dislodge and leave a deep mark. The bath’s edge can be split if too much weight is put on it or is stressed when removing the panel. Often, an bathtub suffers nicks and scratches while stored.
Whatever the situation is, our experts can likely restore it.
Get in touch by phone, or complete our online contact form, or send us pictures via WhatsApp or SMS, and our team will provide expert guidance.
How We Carry Out Bath Resurfacing and Re-Enamelling
Once on-site, our team dust sheet the flooring, toilet, basin, heaters, and key sections of the bathroom.
We thoroughly clean the bath with high-quality bath-safe products and eliminate old, degraded sealant.
We handle all bath surface repairs, including bathtub chips, abrasions, hard water stains, and worn away enamel from hard water. If there are holes or damage at the bottom of the bath, our specialists will ensure a flawless finish.
We mask off the wall tiles, bathroom walls, taps, waste, and overflow with masking to avoid any coating residue.
We use a specialized surface cleaner to get rid of oil residues, dust and particles, any remaining debris.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Then we spray on the reinforcing primer through heat-assisted bonding.In contrast to many resurfacing services, we apply an extra adhesion layer, ensuring that the new enamel coating forms an ultra-durable bond.
We use an specialized infrared drying technology to bond the refinished surface and remove the masking.
Following this, we do any detailed finishing touches, polishing, etc. to achieve an impeccable result.
To complete the process, we add a new bead of sealant so your bath is fully usable.
Professional Granite Worktop Fixing Longfield-Hill, Kent
Granite kitchen tops can suffer minor damage around the perimeter, as this is the most vulnerable point.
The overhanging edges are particularly susceptible, and a dropped pan or utensil could result in a noticeable chip.
Stubborn Stains on Worktops While these surfaces are built to last, some substances and spills may occasionally cause lasting marks on these surfaces.
Surface Marks and Indentations Unintentional knife marks, strong collisions, or constant usage could create light surface marks or indentations on the worktop.
Edge Damage Worktop edges and corners, under sudden pressure, could break off slightly, diminishing its aesthetic appeal.
Don’t Wait, Repair Your Worktop Now! — Get in Touch!
Reach out to the experts at Kent for affordable service and free tips.
Hundreds of satisfied clients in Kent rave about our expert bath repair and bath resurfacing
services.
Good communication:
Clear communication and punctual service.
He provided a thorough explanation and got to work right away.
He took great care in masking everything up and worked very hard.
He left everywhere clean and tidy and we are very happy with the result, the bath looks great.
- David E, Kent
Very Professional
Ilia’s work was outstanding — handled everything with care, professionalism, and delivered stunning results.
I strongly recommend Ilia and the Bath Fixer team
—Sarah W., Kent, Longfield-Hill
Timely and Transparent
Fantastic workmanship.
Scheduled on Monday, and Ilia showed up on time Wednesday to restore my damaged acrylic bath.
Service was polite & efficient.
The repair blends perfectly, with a flawless colour match.
Would definitely suggest Bath Fixer and Ilia for any repairs.
— Trent D. – Kent
Reliable uPVC Door Resurfacing
At Bath Fixer Longfield-Hill, we know how crucial it is to ensuring the longevity and condition of your uPVC doors.
Our specialized fixing approach includes accurate shade and texture adjustment, making the restoration undetectable with the rest of the door.
We clean and prepare the damaged area, ensuring a smooth, even finish.
Whether dealing with small marks or significant damage, our high-level craftsmanship delivers a budget-friendly, long-lasting, and practical fix to door replacement.
Curious to see if we operate in your location?
Explore our location guide or review the regions we operate in.
Your Questions Answered: Our Services
Resurfacing will very often save you up to 60% on the cost of getting a brand-new enamel tub.
Sure, you could replace your high-quality enamel bathtub for a budget-friendly plastic tub, but you will be losing an premium-quality bathtub for a less durable and weaker bath.
Absolutely. Our specialized coating is designed to be applied to bathtubs, washbasins, standalone basins, and even wall tiles.
We would however recommend that the lavatory is replaced, this is due to the nature of cleaning a toilet. Abrasive tools and strong cleaning agents can wear down the resurfacing layer.
You can restore your entire bathroom setup in any finish you desire.
We only see cases where repair kits didn’t work well – which might make us slightly biased – as we are aware of the quality contrast when looking at at-home kits and what we can achieve.
While small bathroom repairs can sometimes be done without help, like clearing a blocked drain, it’s often wiser to call in the pros.
Our knowledge allows us to identify underlying problems that may not be obvious.
When a traditional metal bath is produced, it is protected by an ultra-strong and wear-resistant layer of enamel.
This specialized enamel finish is fused onto the bath’s surface in an intense heating process and hardens during cooling to leave a smooth glossy surface.
Yes, it is. We automatically fix any surface flaws as part of the restoration treatment, yet, if your bath has isolated chips or cracks on an otherwise undamaged enamel, our experts can repair it.
Many of our clients reach out to us who have dropped tiles, chrome plugs, or random household items into the bath and chipped the surface.
Should this occur, rest assured, we can fix it quickly!
Find Out Our Availability and Get a Price Estimate
Contact The Bath Fixer today for a cost-free quote and to book your appointment.
