Name: Bath Fixer Maida-Vale, W9
Address: Maida-Vale, W9, Westminster, United Kingdom
Telephone: 0345 017 0787
Price range: ££-£££
Rating: 4.9

Affordable Sink Chip Restoration Maida-Vale

Whether it's small surface flaws or a heavily scratched or cracked bath, team Bath Fixer Maida-Vale offer a sink, shower, or bath chip repair and renew your bath, sink, or shower using a cost-effective way to avoid full bathtub replacement.

Bathroom fixtures like basins, bathtubs, and shower trays commonly experience impact damage from accidental impacts. As a result, small fractures or chips can form, but that doesn’t mean you need a full replacement.

Call us
0345 017 0787

How it works

Bath Repair Westminster

Traditional enamel bathtubs often get gritty and challenging to keep spotless with regular use.

If your bath reaches this stage, it’s time for Bath Fixer Maida-Vale’s specialists to perform our enamel restoration treatment.

Acrylic baths after years of wear begin to fade, which can make your entire bathroom appear outdated.

No matter if you require a full reglazing of your enamel tub or an acrylic bath repair, with Bath Fixer Maida-Vale, your refreshed and revitalized bath is ensured to stay flawless for many more years.
The professionals at Bath Fixer Maida-Vale can bring back the appearance of your bath for a fraction of the price with our specialized professional resurfacing solutions.

Resurfacing is a perfect solution for various bath materials, whether it's lightweight acrylic baths and enamel to classic cast iron tubs and fiberglass tubs.

The technique we use is suitable for any bath type, allowing us to carry out work all types of tubs and fixtures.

Be it repairing acrylic bathtubs to cast iron bath resurfacing, the final result will have your aged tub looking pristine and modern.

Bath Fixer Maida-Vale’s restoration services have saved our clients save more than 60 percent of the cost by avoiding a full bathtub installation.

Through reglazing, scratches, stains, and dull areas are erased, and coat it with a long-lasting protective layer for an flawless, showroom-quality result.

Professional Shower Tray Reglazing Maida-Vale

Shower bases are a popular choice for their cost-effectiveness and convenience, serving as a efficient choice for bathroom layouts.

But as the years go by, daily use can cause visible damage, giving them a dull and tired look and difficult to maintain.

That’s when Bath Fixer Maida-Vale steps in, saving you from the cost and inconvenience of installing a brand-new shower base.

Our experienced specialists in Maida-Vale focus on offering top-tier and hassle-free restorations, ensuring that your shower trays return to pristine condition.

No matter the level of wear and tear, we have the skills and tools to handle all types of damage, leaving your shower trays looking shiny and brand new.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

Professional Acrylic Bath Fixing Maida-Vale

Bath Fixer Westminster are specialists in acrylic bathtub restoration, shower tray refinishing, seamless sink refinishing, professional bath resurfacing, and hard surface repairs.

Acrylic baths are quite soft and are susceptible to damage from impact from loose tiles. Occasionally a shower screen to slip and cause a visible indentation. The bath’s edge can fracture if it bears too much weight or is impacted when adjusting surrounding tiles. Often, an bath incurs minor dents in shipping.

No matter the damage, we will probably be able to repair it.

Get in touch by phone, or fill in an enquiry form, or share images through text or WhatsApp, and our team will provide expert guidance.

Step-by-Step Process for Professional Bath Refinishing

Upon arrival, we protect the flooring, toilet, washbasin, warming appliances, and key sections of the bathroom.

We professionally clean the surface with specific cleaners and remove any rotten silicone around the bath.

We repair any damage, covering minor cracks and chipped enamel, scratches, calcium buildup, and faded, thin enamel layers. For major wear and damage on the tub’s bottom, we repair that also.

We safeguard the wall tiles, adjacent surfaces, bathroom fixtures, bath drain, and bath overflow using protective masking tape to avoid any coating residue.

We work with a professional-grade cleaning agent to dissolve and lift grimy deposits, dirt, unwanted residues.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

Following that, we coat the surface with the extra bonding solution for maximum surface adhesion.Unlike other bath re-enamelling companies, we apply an extra adhesion layer, so the enamel surface we spray on firmly adheres for long-lasting results.

Our team utilizes an advanced infrared curing method to harden and set the fresh enamel coating and clear away all masking materials.

We then apply expert refinements, buffing, refining, and perfecting the surface to make sure it’s perfect.

As a finishing step, we seal with a fresh silicone seal so your bath is fully usable.

Expert Granite Surface Repair Maida-Vale, Westminster

Granite worktops are prone to chipping at the corners, due to their exposed design.

The material is not supported on the open edge, and a forceful hit from cookware can clip it and knock a bit off.

Persistent Marks and Discoloration While these surfaces are built to last, various harsh products have the potential to leave stubborn discoloration on these surfaces.
Scuffs and Impact Damage Accidental cuts, forceful blows, or everyday activities can result in light surface marks or dents on the worktop.
Chipping The most exposed areas, if hit with force, could break off slightly, affecting its flawless appearance.

Get Your Worktop Repaired Today! — Call Us Now!

Get in touch with the experts at Westminster for affordable service and expert advice.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in Westminster rave about our expert bath repair and bath resurfacing services.

Good communication:

Excellent communication and arrived on time. Alex made sure I understood the process before starting. He took great care in masking everything up and worked very hard. He left no mess behind, and we’re very pleased with the final result—the bath looks brand new. - David E, Westminster

Very Professional

Ilia delivered excellent results — was efficient, courteous, clean and the job looked brilliant. Absolutely recommend Ilia for any bath repair —Sarah W., Westminster, Maida-Vale

Timely and Transparent

Brilliant service. Phoned on Monday & Ilia arrived on Wednesday at the appointed time to repair 2 holes in acrylic bath. Ilia was courteous and highly efficient. The finish is seamless, and the colour is a perfect match. Highly recommend Ilia and the team at Bath Fixer. — Trent D., based in Westminster

Expert uPVC Door Repair

The team at Bath Fixer Maida-Vale, we understand the importance of preserving the look and durability of your vinyl-coated doors.

Our expert repair techniques features seamless tone and finish correction, making the restoration undetectable with the rest of the panel.

We thoroughly treat and prime the affected section, precisely correcting chips and dents.

For everything from scratches to deep fractures, our expertise provides a cost-effective, sustainable, and convenient alternative to door replacement.

Want to check if our services are available near you?

Check out our service area map or review the regions we operate in.

Common Questions We Receive About Our Services

Bath resurfacing can frequently save you approximately 60% on the cost of replacing your enamel bath.

Of course, you can easily swap your classic enamel tub for a budget-friendly plastic tub, but you’ll trade off an highly desirable fixture for a less durable and more fragile bath.

Definitely. Our material is designed to be applied to baths, basins, pedestals, and even ceramic surfaces.

Although, we do recommend that the WC is changed, owing to the nature of cleaning a toilet. Frequent scrubbing and disinfectants can wear down the resurfacing layer.

It’s possible to reglaze your complete set of fixtures to match your preferred shade.

We often come across unsuccessful DIY repair attempts – so our viewpoint is shaped by these cases – also, we know the difference in quality when looking at at-home kits and the professional results we deliver.

While some common bathroom issues are OK to DIY, for example, removing a drain clog, many require expert attention.

Our knowledge allows us to detect hidden issues before they escalate.

When a cast iron or pressed steel bath is made, it is coated with an extremely hard and durable layer of enamel.

This specialized enamel finish is thermally bonded to the tub under very high temperatures and hardens during cooling to create a shiny, glass-like effect.

Definitely! We take care of any damage as part of the restoration treatment, but if you have tiny blemishes on an otherwise well-maintained bath, we have a solution.

It’s common for homeowners to contact us who have dropped tiles, heavy drain stoppers, or various tools into the bath and caused small dents.

No worries if you’ve experienced this, we can make it look like new again!

Bath Resurfacing Maida-Vale, Westminster