Bath Repair & Bath Resurfacing Malden-Rushett, Richmond-upon-Thames

Name: Bath Fixer Malden-Rushett, KT9
Address: Malden-Rushett, KT9, Richmond-upon-Thames, United Kingdom
Telephone: 0345 017 0787
Price range: ££-£££
Rating: 4.9

Need Hard Surface Repair Service in Malden-Rushett, KT9?

Call us
0345 017 0787

Quote Request Form

Cost Effective Sink Damage Restoration Malden-Rushett

From minor imperfections to a completely damaged bath, the professionals at Bath Fixer Malden-Rushett specialize in a sink, shower, or bath chip repair and bring back the original beauty of worn-out bathroom fixtures offering a affordable solution instead of costly replacements.

Sinks, baths, and shower trays commonly experience impact damage when things are dropped onto them. This can cause the surface to crack or chip, however, replacing your entire fixture isn’t necessary.

Call us
0345 017 0787

How it works

Bath Repair Richmond-upon-Thames

Vintage enamel tubs tend to become gritty and challenging to keep spotless due to wear and tear.

At this point, it’s time for the professionals at Bath Fixer Malden-Rushett to perform our bath resurfacing service.

Acrylic baths after years of wear start to discolour, thus making your bathroom look tired.

No matter if you require a full reglazing of your enamel tub or a full resurfacing for an acrylic fixture, with Bath Fixer Malden-Rushett, your beautifully restored bathtub is guaranteed to remain flawless for years to come.
The Bath Fixer Malden-Rushett team can bring back the appearance of your bathtub for much less than replacement with our expert bathtub refinishing and restoration.

Bath reglazing is an ideal fix for any type of bathtub, be it lightweight acrylic baths and traditional enamel-coated bathtubs to classic cast iron tubs and reinforced fiberglass baths.

Our specialist process is suitable for any bath type, enabling us to repair and restore for any bathtub design.

Be it repairing acrylic bathtubs to restoring old cast iron baths, the final result will have your old bath looking spotless and refreshed.

Bath Fixer Malden-Rushett’s restoration services have allowed property owners reduce expenses by more than 60% by avoiding a full bathtub installation.

Through reglazing, all marks and imperfections are removed, and apply a new surface coating for an flawless, showroom-quality result.

Shower Base Refinishing Malden-Rushett

People frequently select shower trays for their affordability and practicality, offering a efficient choice for bathroom layouts.

However, over time, constant exposure to water and soap can degrade them, making them look outdated and requiring extra effort for upkeep.

Bath Fixer Malden-Rushett offers the perfect solution, saving you from the cost and inconvenience of installing a brand-new shower base.

The skilled professionals at Malden-Rushett are committed to delivering high-quality and dependable repairs, restoring your shower trays regain their original shine.

Whether it’s scratches, chips, or stains, our team possesses the expertise and equipment to repair and resurface any imperfections, ensuring a polished, like-new finish.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

Malden-Rushett Acrylic Bathtub Restoration

Bath Fixer Richmond-upon-Thames are experts in acrylic bathtub restoration, restoring acrylic shower trays, seamless sink refinishing, high-quality enamel restoration, and damage repair for solid surfaces.

Acrylic baths are prone to surface damage and are susceptible to damage from dropped tiles while tiling. It’s not uncommon for a shower screen to slip and dig into the surface. The rim of the bathtub can break if undue force is exerted or experiences force when taking off the bath panel. It’s common for, an acrylic bath can be damaged in storage or transit.

Whatever the problem may be, we have the skills to repair it.

Call us, or send us a quick message, or WhatsApp or text us some images, and we can advise.

Bath Re-Enamelling and Bath Resurfacing Full Step-by-Step Procedure

As the first step, we shield the ground surface, WC, basin, radiators, and major fixtures.

Our team deep cleans the bathtub with specific cleaners and get rid of deteriorated caulking around the tub.

We restore and fix imperfections, ranging from minor cracks and chipped enamel, abrasions, mineral deposits, and faded, thin enamel layers. Should your bathtub have structural issues, our specialists will ensure a flawless finish.

We mask off the tiles, vertical surfaces, bathroom fixtures, waste, and bath overflow with specialized covering materials to avoid any coating residue.

Our team applies a specialized surface cleaner to remove grimy deposits, dirt, any remaining debris.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

We proceed by spraying the reinforcing primer for maximum surface adhesion.Unlike other bath re-enamelling companies, we apply an extra adhesion layer, ensuring that the new enamel coating has a very strong hold to the original surface.

Our team utilizes an infrared low-bake system to cure the new enamel and clear away all masking materials.

We then carry out precision finishing, buffing, refining, and perfecting the surface to achieve an impeccable result.

As a finishing step, we seal with a new bead of sealant so your bath is fully usable.

Granite Countertop Chip Restoration in Malden-Rushett, Richmond-upon-Thames

Granite countertops are prone to chipping on their edges, due to their exposed design.

The material is not supported on the open edge, and a forceful hit from cookware could result in a noticeable chip.

Surface Staining and Fading Despite their resistance, specific liquids and ingredients may occasionally cause lasting marks on these surfaces.
Chips, Scratches, and Dents Unexpected nicks, dropped objects, or regular wear and tear could create minor scuffs or small depressions on the worktop.
Surface Chips The most exposed areas, if hit with force, could break off slightly, compromising the worktop’s seamless look.

Fix Your Worktop Today! — Contact Us Now!

Get in touch with the experts at Richmond-upon-Thames for budget-friendly repairs and helpful insights.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in Richmond-upon-Thames rave about our expert bath repair and bath resurfacing services.

Good communication:

Kept me informed and arrived as scheduled. Alex explained everything and then got straight to it. He ensured everything was properly covered and worked diligently. He made sure the area was clean before leaving, and we’re delighted with the results—our bath looks amazing! - David E, Richmond-upon-Thames

Very Professional

Ilia delivered excellent results — worked efficiently, was polite, tidy, and the outcome was flawless. Highly recommend Ilia and Bath Fixer —Sarah W., located in Malden-Rushett, Richmond-upon-Thames

Timely and Transparent

Fantastic workmanship. Called on Monday, and by Wednesday, Ilia was here as scheduled to fix two holes in my acrylic bath. Ilia was courteous and highly efficient. The colour match is spot on, making the repair virtually invisible. Highly recommend Ilia and the team at Bath Fixer. — Trent D., based in Richmond-upon-Thames

Specialist uPVC Door Fixing

Bath Fixer Malden-Rushett specialists, we prioritize ensuring the longevity and condition of your uPVC doors.

Our comprehensive repair process utilizes accurate shade and texture adjustment, ensuring that the repaired areas blend seamlessly with the rest of the panel.

We clean and prepare the damaged area, meticulously filling and smoothing imperfections.

Whether dealing with small marks or significant damage, our specialized knowledge offers an affordable, eco-friendly, and hassle-free solution to door replacement.

Want to check if our services are available near you?

Explore our location guide or browse through our service areas.

Your Questions Answered: Our Services

Refinishing your bath can typically save you approximately 60% on the cost of buying a replacement bath.

Of course, you can easily swap your high-quality enamel bathtub for a modern low-cost plastic bath, but you’d be giving up an premium-quality item for a less valuable and weaker bath.

Yes. Our material is suitable for baths, washbasins, sink pedestals, and even wall tiles.

We would however recommend that the WC is replaced, as a result of the harsh cleaning process. Abrasive tools and strong cleaning agents will damage the coating material over time.

It’s possible to reglaze your entire bathroom setup to match your preferred shade.

Our experience is mostly with the repair kits that did not produce a satisfactory result – so we probably have a bias on this point – as we are aware of the quality contrast when comparing a DIY repair kit and the expert finish we provide.

While some common bathroom issues are OK to DIY, for example, removing a drain clog, most are best left to professionals.

That’s because we have the experience to know whether a bigger problem may be hiding in plain sight.

During the manufacturing of a cast iron or pressed steel bathtub, it is finished with an highly resilient and long-lasting layer of enamel.

This enamel coating is fused onto the bath’s surface through a controlled melting process and hardens during cooling to result in a sleek, polished look.

Yes, it is. We automatically fix any surface flaws as part of the bath refinishing procedure, yet, if your bath has small chips or damage on an otherwise good surface, our experts can repair it.

We frequently hear from customers who have accidentally knocked tiles, heavy drain stoppers, or random household items into the bath and chipped the surface.

No worries if you’ve experienced this, we can fix it quickly!