Bath Repair & Bath Resurfacing Mark-Cross, East-Sussex

Name: Bath Fixer Mark-Cross, TN6
Address: Mark-Cross, TN6, East-Sussex, United Kingdom
Telephone: 0345 017 0787
Price range: ££-£££
Rating: 4.9

Need Hard Surface Repair Service in Mark-Cross, TN6?

Call us
0345 017 0787

Quote Request Form

Cost Effective Bath Chip Repair Mark-Cross

From tiny chips to a completely damaged bath, team Bath Fixer Mark-Cross can carry out a full surface restoration for baths, showers, and sinks and revive old, cracked, or chipped surfaces offering a money-saving option to extend the life of your bath.

Bathroom fixtures like basins, bathtubs, and shower trays frequently suffer wear and tear when things are dropped onto them. As a result, small fractures or chips can form, however, replacing your entire fixture isn’t necessary.

Call us
0345 017 0787

How it works

Bath Repair East-Sussex

Old enamel baths gradually turn porous and tough to scrub as the years pass.

When this happens, it’s time for Bath Fixer Mark-Cross’s specialists to perform our enamel restoration treatment.

Fiberglass or acrylic baths as they age lose their original shine, reducing the aesthetic appeal of your bath.

Whether you need an enamel bath resurface or an acrylic bath repair, trust Bath Fixer Mark-Cross to deliver, your like-new bath surface is guaranteed to remain good as ever with lasting durability.
The professionals at Bath Fixer Mark-Cross can bring back the look of your bathtub for much less than replacement with our specialized bath resurfacing and repair service.

Resurfacing is a perfect solution for various bath materials, including acrylic and enamel-finished tubs to classic cast iron tubs and fiberglass tubs.

Our professional resurfacing system is suitable for any bath type, allowing us to carry out work on any type of bathroom suite.

Whether fixing acrylic tubs to refinishing cast iron bathtubs, the end product will have your worn-out bathtub looking white, bright, and clean.

Bath Fixer Mark-Cross’s restoration services has helped our customers cut costs by over 60% instead of purchasing a brand-new bath.

By applying our restoration techniques, we get rid of all the stains and scratches, and coat it with a long-lasting protective layer for an factory-fresh look.

Shower Base Refinishing Mark-Cross

Shower trays are often chosen for their affordability and practicality, serving as a modern option for bathroom layouts.

But as the years go by, wear and tear can take its toll, leaving them looking worn and difficult to maintain.

Here’s where our specialists at Bath Fixer Mark-Cross can help, eliminating the need for a pricey replacement of buying an entirely new shower tray.

The skilled professionals at Mark-Cross is dedicated to providing reliable and efficient service, guaranteeing that your shower surface look as good as new.

Be it cracks, fading, or surface damage, our specialists use professional-grade materials to tackle any issue, leaving your shower trays looking shiny and brand new.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

Expert Acrylic Bath Resurfacing Mark-Cross

Your trusted professionals at Bath Fixer East-Sussex offer professional services in acrylic bath repair, acrylic shower tray repair, ceramic sink repair, bathtub reglazing, and resurfacing solid bath fixtures.

Acrylic bathtubs have a softer surface and are susceptible to damage from falling tiles during tiling. It’s not uncommon for a glass partition to shift and dig into the surface. The acrylic border can be split if heavy items are placed on it or is stressed when accessing the plumbing. Many times, an acrylic bath can be damaged in storage or transit.

Regardless of the issue, we have the skills to repair it.

Reach out to us, or fill in an enquiry form, or share images through text or WhatsApp, and we’ll offer professional recommendations.

Step-by-Step Process for Professional Bath Refinishing

Arrive and shield the ground surface, lavatory, basin, heating units, and major fixtures.

We professionally clean the surface using industry-approved solutions and remove any rotten silicone around the bath.

Our experts fix all types of damage, ranging from minor cracks and chipped enamel, scratches, mineral deposits, and erosion caused by minerals in water. If the base of your bath has cracks or holes, we reinforce and fix it completely.

We cover the tiles, adjacent surfaces, water outlets, waste, and bath overflow using protective masking tape to avoid any coating residue.

We use a high-strength degreasing solution to eliminate oil residues, surface contaminants, unwanted residues.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

Next, we apply the additional adhesion layer through heat-assisted bonding.Where others may stop at one bonding layer, we use two bonding agents, so the enamel surface we spray on remains securely attached for years to come.

Our team utilizes an infrared low-bake system to ensure a durable, long-lasting finish and take off the protective coverings.

Following this, we carry out precision finishing, buffing, refining, and perfecting the surface to deliver a pristine, professional-grade outcome.

To complete the process, we add a fresh silicone seal so it is ready for use.

Granite Countertop Chip Restoration in Mark-Cross, East-Sussex

Granite kitchen tops may sustain chips around the perimeter, because this area lacks structural support.

Without backing, the edges remain at risk, and an impact from a heavy item might lead to minor surface damage.

Stains and Discolouration Although they are stain-resistant, certain chemicals or foods have the potential to leave stubborn discoloration on these surfaces.
Surface Marks and Indentations Unintentional knife marks, strong collisions, or everyday activities may cause superficial scratches or shallow marks on the worktop.
Surface Chips The edges or corners, if subjected to hard knocks, are prone to minor fractures, affecting its flawless appearance.

Fix Your Worktop Today! — Contact Us Now!

Speak with the experts at East-Sussex for affordable service and free tips.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in East-Sussex rave about our expert bath repair and bath resurfacing services.

Good communication:

Excellent communication and arrived on time. Alex walked me through the process before starting. He took great care in masking everything up and worked very hard. Everything was spotless when he finished, and we’re extremely happy—the bath looks stunning. - David E, East-Sussex

Very Professional

Ilia did an amazing job — was prompt, professional, and left everything spotless. Wouldn’t hesitate to recommend Bath Fixer and Ilia —Sarah W., Mark-Cross, East-Sussex

Timely and Transparent

Top-notch service. Called on Monday, and by Wednesday, Ilia was here as scheduled to fix two holes in my acrylic bath. Everything was handled professionally and smoothly. The repair is practically invisible thanks to the expert colour matching. Would not hesitate in recommending both the company & Ilia. — Trent D. in East-Sussex

Expert uPVC Door Repair

The team at Bath Fixer Mark-Cross, we recognize the value of ensuring the longevity and condition of your plastic doors.

Our detailed restoration method includes precise color blending and surface replication, allowing the fixed spots to integrate flawlessly with the rest of the panel.

We carefully ready the surface for repairs, flawlessly restoring damaged spots.

Whether dealing with small marks or significant damage, our specialized knowledge delivers a budget-friendly, long-lasting, and practical fix to buying a brand-new uPVC door.

Curious to see if we operate in your location?

View our coverage map or see the full list of locations we serve.

Your Questions Answered: Our Services

Bath resurfacing can frequently save you close to 60% on the cost of buying a replacement bath.

You may choose to switch your vintage enamel bath for a cheaper acrylic alternative, but you’ll trade off an premium-quality fixture for a less durable and lower-value bath.

Yes. Our specialized coating is formulated to adhere to tubs, sinks, standalone basins, and even tiles.

That being said, we suggest that the lavatory is swapped out, as a result of the nature of cleaning a toilet. Abrasive tools and strong cleaning agents can wear down the resurfacing layer.

You have the option to refinish your entire bathroom setup in the colour of your choice.

Our experience is mostly with the repair kits that did not produce a satisfactory result – which may give us a certain perspective – also, we know the difference in quality between DIY solutions and what we can achieve.

Some bathroom fixes, like unclogging a drain, can be DIY-friendly, like clearing a blocked drain, it’s often wiser to call in the pros.

Our knowledge allows us to spot deeper concerns that could go unnoticed.

When a traditional metal bath is produced, it is coated with an highly resilient and long-lasting layer of enamel.

This protective enamel layer is thermally bonded to the tub under very high temperatures and sets into a smooth, tough surface to result in a sleek, polished look.

Absolutely! We automatically fix any imperfections as part of the resurfacing process, however, if there are minor surface damage on an otherwise intact bathtub, we have a solution.

It’s common for homeowners to contact us who have had loose tiles fall, solid fixtures, or random household items into the bath and damaged the enamel.

Should this occur, rest assured, it is easily repaired!