No matter if it's a slight blemish or a severely worn bathtub, the professionals at Bath Fixer Milford are equipped to perform a full surface restoration for baths, showers, and sinks and renew worn-out bathroom fixtures using a economical option to extend the life of your bath.
Bathroom fixtures like basins, bathtubs, and shower trays commonly experience impact damage due to dropping items on the surface. This can cause the surface to crack or chip, but don’t take this as a sign to replace the bath or basin.
With extensive experience in hard surface restoration, we specialize in:
Basin Repairs
Floor Tile Repair
Kitchen Worktop Repair
Wooden Worktops Repair
Wooden Frames Repair
Why Bath Fixer Stands Out
Bath Fixer professionals are qualified to carry out expert specialized refinishing work to internal and external doors, floors, kitchen and bathroom countertops, bathtubs, shower bases, tiles, window sills and frames, tables, cabinets, and wooden fixtures, and a wide range of other surfaces in GU8.
Bath Repair Surrey
Old enamel baths tend to become porous and tough to scrub due to wear and tear.
If your bath reaches this stage, it’s time for the professionals at Bath Fixer Milford to carry out our tub refinishing process.
Fiberglass or acrylic baths with frequent use lose their original shine, which can make your entire bathroom appear outdated.
If you’re looking for a professional restoration for an enamel bath or a colour refresh for an acrylic tub, trust Bath Fixer Milford to deliver, your sparkling newly resurfaced bath will continue looking good as ever with lasting durability.
Bath Fixer Milford experts are able to revive the look of your tub at a fraction of the cost with our specialized professional resurfacing solutions.
Refinishing offers the most cost-effective way for any type of bathtub, ranging from lightweight acrylic baths and traditional enamel-coated bathtubs to cast iron and fibreglass.
The technique we use is designed for various bath surfaces, so we can resurface and reglaze for any bathtub design.
From acrylic bath repairs to refinishing cast iron bathtubs, the completed work will have your worn-out bathtub looking white, bright, and clean.
The Surrey-wide bathtub refinishing service we offer has helped our customers spend less than 40% compared to buying a new one instead of purchasing a brand-new bath.
With resurfacing, all marks and imperfections are removed, and apply a new surface coating for an factory-fresh look.
Shower Tray Restoration Milford
Shower trays are often chosen for their cost-effectiveness and space-saving design, serving as a functional solution for space-conscious bathrooms.
But as the years go by, they can suffer from deterioration, making them look outdated and hard to clean.
That’s when Bath Fixer Milford steps in, helping you avoid unnecessary spending of replacing your shower trays.
Our experienced specialists in Milford specialize in top-tier and hassle-free restorations, restoring your shower trays are restored to their former glory.
From minor scratches to deep chips and stubborn stains, our team possesses the expertise and equipment to handle all types of damage, transforming your shower base to a factory-fresh look.
What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.
FREE Quote
Request Form
Acrylic Tub Repair in Milford
Bath Fixer Surrey provide industry-leading solutions for seamless acrylic bath repairs, fixing cracks and damage in shower trays, seamless sink refinishing, durable bath refinishing, and fixing wear and tear on hard surfaces.
Acrylic tubs are relatively delicate and can easily be damaged from tiling mishaps. Sometimes a glass partition to shift and cause a visible indentation. The perimeter of the tub can fracture if excessive pressure is applied or experiences force when adjusting surrounding tiles. Many times, an bath incurs minor dents in shipping.
Regardless of the issue, we can provide a professional solution.
Give us a ring, or submit a service request, or WhatsApp or text us some images, and we can advise.
Complete Guide to Bath Re-Enamelling and Resurfacing
Upon arrival, we cover the floor, commode, washbasin, heating units, and any exposed surfaces.
We thoroughly clean the bath with specific cleaners and get rid of deteriorated caulking around the tub.
We repair any damage, such as minor cracks and chipped enamel, surface marks, hard water stains, and erosion caused by minerals in water. For major wear and damage on the tub’s bottom, we repair that also.
We safeguard the tiles, walls, water outlets, waste, and overflow with masking to avoid any coating residue.
We use a specialized surface cleaner to remove stubborn grease buildup, surface contaminants, any remaining debris.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
We proceed by spraying the reinforcing primer through heat-assisted bonding.Unlike other bath re-enamelling companies, we apply an extra adhesion layer, allowing the reglazed bath firmly adheres for long-lasting results.
We apply an infrared low-bake system to cure the new enamel and unveil the fully restored bath.
After that, we do any detailed finishing touches, polishing, etc. to make sure it’s perfect.
To complete the process, we add a high-quality sealing layer so it is ready for use.
Granite worktops can be chipped along the edges, because this area lacks structural support.
The material is not supported on the open edge, and a dropped pan or utensil might lead to minor surface damage.
Stains and Discolouration Although they are stain-resistant, certain chemicals or foods might result in deep-set stains on these surfaces.
Scuffs and Impact Damage Unintentional knife marks, dropped objects, or regular wear and tear could create light surface marks or shallow marks on the worktop.
Chipping The edges or corners, under sudden pressure, may sustain chips, affecting its flawless appearance.
Professional Worktop Repair Available! — Call Us Today!
Reach out to the Surrey specialists for affordable service and helpful insights.
Hundreds of satisfied clients in Surrey rave about our expert bath repair and bath resurfacing
services.
Good communication:
Excellent communication and arrived on time.
Alex made sure I understood the process before starting.
He was meticulous in masking up and put in a lot of effort.
He made sure the area was clean before leaving, and we’re delighted with the results—our bath looks amazing!
- David E, Surrey
Very Professional
Ilia provided top-notch service — was prompt, professional, and left everything spotless.
I strongly recommend Ilia and the Bath Fixer team
—Sarah W., located in Milford, Surrey
Timely and Transparent
Top-notch service.
Phoned on Monday & Ilia arrived on Wednesday at the appointed time to repair 2 holes in acrylic bath.
Service was polite & efficient.
The colour match is spot on, making the repair virtually invisible.
Absolutely would recommend Bath Fixer and Ilia to anyone.
— Trent D., based in Surrey
Professional uPVC Door Restoration
The team at Bath Fixer Milford, we recognize the value of ensuring the longevity and condition of your plastic doors.
Our specialized fixing approach features precise color blending and surface replication, making the restoration undetectable with the rest of the panel.
We clean and prepare the damaged area, ensuring a smooth, even finish.
Whether dealing with small marks or significant damage, our high-level craftsmanship delivers a budget-friendly, long-lasting, and practical fix to full door replacement.
Want to check if our services are available near you?
Take a look at the map or our list of covered regions.
What Customers Ask Most About Our Services
Reglazing usually save you around 60% on the cost of buying a replacement bath.
Sure, you could replace your high-quality enamel bathtub for a mass-produced acrylic bath, but you’ll trade off an valuable and timeless item for a much lower-quality and weaker bath.
Yes. Our specialized coating is suitable for baths, basins, pedestals, and even ceramic surfaces.
That being said, we suggest that the toilet is changed, as a result of the nature of cleaning a toilet. Brushes and chemicals will damage the coating material over time.
You have the option to refinish your entire suite in the colour of your choice.
We primarily encounter kits that failed to deliver the expected finish – so we probably have a bias on this point – also, we know the difference in quality when looking at at-home kits and our high-quality refinishing.
While some common bathroom issues are OK to DIY, for example, removing a drain clog, many require expert attention.
That’s because we have the experience to identify underlying problems that may not be obvious.
In the production process of cast iron and steel baths, it is protected by an exceptionally tough and robust layer of enamel.
This protective enamel layer is applied through high-temperature fusion at extreme heat levels and forms a strong and glossy finish to create a shiny, glass-like effect.
Of course! We handle any cracks or chips as part of the restoration treatment, however, if there are minor surface damage on an otherwise good surface, we have a solution.
It’s common for homeowners to contact us who have experienced tile breakages, heavy drain stoppers, or various tools into the bath and left noticeable marks.
If this is the case, then don’t worry, it is easily repaired!
Find Out Our Availability and Get a Price Estimate
Call The Bath Fixer today for a free consultation and to secure your service date.
