From tiny chips to a badly deteriorated tub, the skilled specialists at Bath Fixer Moons-Green are equipped to perform a full surface restoration for baths, showers, and sinks and bring back the original beauty of old, cracked, or chipped surfaces through a money-saving solution instead of costly replacements.
Bathroom fixtures like basins, bathtubs, and shower trays frequently suffer wear and tear due to dropping items on the surface. Such incidents can leave noticeable damage, however, replacing your entire fixture isn’t necessary.
With extensive experience in hard surface restoration, we specialize in:
Shower Trays Repair
Floor Tile Repair
Kitchen Sinks Repair
Marble & Granite Repair
uPVC Cills Repair
What Sets Bath Fixer Apart?
Bath Fixer professionals are qualified to carry out on-site hard surface repairs for all types of doors, various flooring surfaces, kitchen and bathroom countertops, enamel and acrylic tubs, shower trays, tiles, window frames and cills, wood and composite furniture, and various additional fixtures in TN30.
Bath Resurfacing & Bath Repair Kent
Old enamel baths can become coarse and hard to maintain due to wear and tear.
Once this occurs, it’s time for our expert team at Bath Fixer Moons-Green to carry out our tub refinishing process.
Modern acrylic tubs after years of wear lose their original shine, which can make your entire bathroom appear outdated.
No matter if you require an enamel bath resurface or a full resurfacing for an acrylic fixture, our team at Bath Fixer Moons-Green, your like-new bath surface is ensured to stay pristine with lasting durability.
The professionals at Bath Fixer Moons-Green can restore the visual appeal of your tub at a fraction of the cost with our high-quality bathtub refinishing and restoration.
Resurfacing is a perfect solution for all kinds of baths, including modern acrylic tubs and traditional enamel-coated bathtubs to cast iron and fibreglass.
Our professional resurfacing system is engineered for multiple bathtub compositions, allowing us to carry out work all types of tubs and fixtures.
For acrylic tub restoration to re-enamelling vintage cast iron tubs, the completed work will have your old bath looking white, bright, and clean.
Bath Fixer Moons-Green’s restoration services have allowed property owners spend less than 40% compared to buying a new one when compared to the cost of bath replacement.
Through reglazing, all marks and imperfections are removed, and apply a new surface coating for an ultra-smooth surface.
Shower Tray Restoration Moons-Green
Many homeowners opt for shower trays for their cost-effectiveness and space-saving design, delivering a modern choice for space-conscious bathrooms.
However, over time, they can suffer from deterioration, causing them to appear aged and hard to clean.
Bath Fixer Moons-Green offers the perfect solution, sparing you the hassle and expense of replacing your shower trays.
The skilled professionals at Moons-Green are committed to delivering top-tier and hassle-free restorations, guaranteeing that your shower surface regain their original shine.
Be it cracks, fading, or surface damage, we have the skills and tools to handle all types of damage, transforming your shower base to a factory-fresh look.
What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.
FREE Quote
Request Form
Acrylic Tub Repair in Moons-Green
Our team at Bath Fixer Kent are experts in acrylic bath repair, professional shower tray resurfacing, full ceramic sink resurfacing, bath re-enamelling, and resurfacing solid bath fixtures.
Acrylic bath surfaces are not as hard as other materials and may incur damage from falling tiles during tiling. In some cases a loose shower screen to move and scratch or gouge the bath. The lip on the edge of the bath can crack if undue force is exerted or is stressed when adjusting surrounding tiles. It’s common for, an acrylic bath sustains damage before installation.
Whatever the situation is, we have the skills to repair it.
Get in touch by phone, or complete our online contact form, or send us pictures via WhatsApp or SMS, and we’ll offer professional recommendations.
How We Carry Out Bath Resurfacing and Re-Enamelling
Once on-site, our team dust sheet the flooring, lavatory, sink, warming appliances, and all large surface areas.
We thoroughly clean the bath with high-quality bath-safe products and strip away moldy or damaged silicone.
Our experts fix all types of damage, covering chips in the bath, scratches, mineral deposits, and faded, thin enamel layers. If the base of your bath has cracks or holes, we reinforce and fix it completely.
We mask off the bathroom tiles, adjacent surfaces, bathroom fixtures, drain opening, and overflow drain with specialized covering materials to avoid any coating residue.
We work with a professional-grade cleaning agent to get rid of any grease, dirt, any remaining debris.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Then we spray on the second bonding agent for maximum surface adhesion.Where others may stop at one bonding layer, we reinforce the bond with a second primer, so the enamel surface we spray on remains securely attached for years to come.
We employ an professional-grade heat-curing process to harden and set the fresh enamel coating and remove the masking.
Following this, we do any detailed finishing touches, bringing out a smooth, high-gloss effect to achieve an impeccable result.
As a finishing step, we seal with a protective waterproof sealant so your newly resurfaced bath is protected.
Granite Worktop Damage Repair Services Moons-Green, Kent
Granite worktops may sustain chips at the corners, due to their exposed design.
Without backing, the edges remain at risk, and a dropped pan or utensil may cause a small section to break away.
Stains and Discolouration Despite their resistance, various harsh products might result in deep-set stains on these surfaces.
Scuffs and Impact Damage Accidental cuts, strong collisions, or daily use could create superficial scratches or shallow marks on the worktop.
Edge Damage Perimeter sections, under sudden pressure, may sustain chips, diminishing its aesthetic appeal.
Don’t Wait, Repair Your Worktop Now! — Get in Touch!
Contact the Kent team for affordable service and expert advice.
Hundreds of satisfied clients in Kent rave about our expert bath repair and bath resurfacing
services.
Good communication:
Kept me informed and arrived as scheduled.
Alex made sure I understood the process before starting.
He ensured everything was properly covered and worked diligently.
He made sure the area was clean before leaving, and we’re delighted with the results—our bath looks amazing!
- David E, Kent
Very Professional
Ilia delivered excellent results — worked efficiently, was polite, tidy, and the outcome was flawless.
Highly recommend Ilia and Bath Fixer
—Sarah W., located in Moons-Green, Kent
Timely and Transparent
Fantastic workmanship.
Contacted them on Monday, and by Wednesday, Ilia was right on time to handle the acrylic bath repair.
Polite, prompt, and professional service throughout.
You can’t even tell there was damage—the colour match is perfect!
Highly recommend Ilia and the team at Bath Fixer.
— Trent D. – Kent
Specialist uPVC Door Fixing
Bath Fixer Moons-Green specialists, we prioritize preserving the look and durability of your modern uPVC door surfaces.
Our comprehensive repair process involves precise color blending and surface replication, so the door retains its original appearance with the rest of the surface.
We remove debris and smooth out the flaws, meticulously filling and smoothing imperfections.
Handling both light blemishes and major breaks, our professional skills delivers a budget-friendly, long-lasting, and practical fix to installing a new door.
Looking to find out if we work in your region?
Check out our service area map or browse through our service areas.
Common Questions We Receive About Our Services
Refinishing your bath can typically save you close to 60% on the cost of replacing your enamel bath.
You may choose to switch your enamel bath for a modern low-cost plastic bath, but you’d be giving up an extremely sought-after bathtub for a less valuable and weaker bath.
Absolutely. Our resurfacing solution is engineered for use on baths, washbasins, standalone basins, and even wall tiles.
However, we advise that the toilet is swapped out, because of the way toilets are cleaned. Frequent scrubbing and disinfectants will damage the coating material over time.
You have the option to refinish your full bathroom suite in any finish you desire.
Our experience is mostly with cases where repair kits didn’t work well – so we probably have a bias on this point – plus, we recognize the superior outcome when comparing a DIY repair kit and the expert finish we provide.
Some bathroom fixes, like unclogging a drain, can be DIY-friendly, including simple drain cleaning, it’s often wiser to call in the pros.
This is due to our expertise to know whether a bigger problem may be hiding in plain sight.
In the production process of cast iron and steel baths, it is covered in an ultra-strong and wear-resistant layer of enamel.
This specialized enamel finish is applied through high-temperature fusion under very high temperatures and sets into a smooth, tough surface to ensure a flawless, mirror-like finish.
Yes, it is. We handle any imperfections as part of the resurfacing process, though, if you notice isolated chips or cracks on an otherwise intact bathtub, we offer a targeted fix.
We frequently hear from customers who have dropped tiles, heavy drain stoppers, or various tools into the bath and chipped the surface.
Should this occur, rest assured, our team can restore it seamlessly!
Get a Free Quote and Check Our Availability
Reach out to The Bath Fixer today for a no-obligation quote and to secure your service date.
