Bath Repair & Bath Resurfacing Mousehill, Surrey

Name: Bath Fixer Mousehill, GU8
Address: Mousehill, GU8, Surrey, United Kingdom
Telephone: 0345 017 0787
Price range: ££-£££
Rating: 4.9

Need Bath Repair & Bath Resurfacing Service in Mousehill, GU8?

Call us
0345 017 0787

Quote Request Form

Cost Effective Sink Damage Restoration Mousehill

From light wear and tear to a severely worn bathtub, our experts at Bath Fixer Mousehill specialize in a professional chip repair for sinks, showers, and baths and bring back the original beauty of worn-out bathroom fixtures with a budget-friendly way to avoid full bathtub replacement.

Bath surfaces, sinks, and shower trays frequently suffer wear and tear because of heavy objects falling. This can cause the surface to crack or chip, however, replacing your entire fixture isn’t necessary.

Call us
0345 017 0787

How it works

Bath Resurfacing & Bath Repair Surrey

Aged enamel-coated baths often get rough and difficult to clean over time.

If your bath reaches this stage, it’s time for Bath Fixer Mousehill to conduct our tub refinishing process.

Plastic-based bathtubs over time start to discolour, giving your space a dull, worn-out look.

No matter if you require a full reglazing of your enamel tub or a colour refresh for an acrylic tub, our team at Bath Fixer Mousehill, your refreshed and revitalized bath will continue looking pristine with lasting durability.
The Bath Fixer Mousehill team can restore the look of your bath at a fraction of the cost with our exclusive bath resurfacing and repair service.

Refinishing offers the most cost-effective way for a wide range of tubs, be it acrylic and enamel-finished tubs to vintage cast iron bathtubs and fibreglass.

Our professional resurfacing system is engineered for multiple bathtub compositions, so we can resurface and reglaze for any bathtub design.

Be it repairing acrylic bathtubs to restoring old cast iron baths, the finish will have your old bath looking spotless and refreshed.

The Surrey-wide bathtub refinishing service we offer have enabled homeowners spend less than 40% compared to buying a new one by avoiding a full bathtub installation.

With resurfacing, we eliminate surface damage and blemishes, and add a durable refinishing layer for an immaculate finish.

Shower Base Refinishing Mousehill

People frequently select shower trays for their reasonable pricing and practicality, providing a practical solution for bathroom layouts.

Yet with frequent use, wear and tear can take its toll, causing them to appear aged and challenging to keep in good condition.

Bath Fixer Mousehill offers the perfect solution, sparing you the hassle and expense of buying an entirely new shower tray.

Our experienced specialists in Mousehill is dedicated to providing top-tier and hassle-free restorations, restoring your shower trays are restored to their former glory.

From minor scratches to deep chips and stubborn stains, we come fully prepared with the right techniques to repair and resurface any imperfections, giving your shower a smooth, refreshed appearance.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

Professional Acrylic Bath Fixing Mousehill

The experts at Bath Fixer Surrey provide industry-leading solutions for acrylic bath repair, fixing cracks and damage in shower trays, ceramic basin restoration, high-quality enamel restoration, and hard surface repairs.

Acrylic tubs are relatively delicate and may incur damage from accidents during bathroom renovations. It’s not uncommon for a glass partition to shift and scratch or gouge the bath. The bath’s edge can be split if it bears too much weight or experiences force when installing new fixtures. Frequently, an acrylic bath sustains damage before installation.

Whatever the problem may be, our experts can likely restore it.

Get in touch by phone, or complete our online contact form, or share images through text or WhatsApp, and we’ll let you know the best solution.

Complete Guide to Bath Re-Enamelling and Resurfacing

Once on-site, our team protect the ground surface, lavatory, washbasin, radiators, and all large surface areas.

We meticulously scrub the bath using industry-approved solutions and remove any rotten silicone around the bath.

We repair any damage, including minor cracks and chipped enamel, scratches, mineral deposits, and erosion caused by minerals in water. If there are holes or damage at the bottom of the bath, we restore it professionally.

We safeguard the tiles, bathroom walls, water outlets, drain opening, and bath overflow by applying precision masking to ensure no overspray affects them.

We use a specialized surface cleaner to remove any grease, dirt, impurities and stains.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

We proceed by spraying the second bonding agent for maximum surface adhesion.In contrast to many resurfacing services, we use two bonding agents, allowing the reglazed bath has a very strong hold to the original surface.

Our team utilizes an infrared low-bake system to ensure a durable, long-lasting finish and take off the protective coverings.

We then apply expert refinements, bringing out a smooth, high-gloss effect to make sure it’s perfect.

To complete the process, we add a high-quality sealing layer so your newly resurfaced bath is protected.

Granite Countertop Chip Restoration in Mousehill, Surrey

Granite countertops can suffer minor damage around the perimeter, because this area lacks structural support.

The material is not supported on the open edge, and a hard object like a pot might lead to minor surface damage.

Stains and Discolouration Although they are stain-resistant, certain chemicals or foods might result in deep-set stains on these surfaces.
Surface Marks and Indentations Unexpected nicks, dropped objects, or regular wear and tear might lead to light surface marks or shallow marks on the worktop.
Chipping The edges or corners, when impacted by heavy objects, can chip, compromising the worktop’s seamless look.

Restore Your Worktop Instantly! — Call Now!

Get in touch with the experts at Surrey for cost-effective solutions and expert advice.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in Surrey rave about our expert bath repair and bath resurfacing services.

Good communication:

Great communication with a timely arrival. He clearly explained each step and began the work immediately. He ensured everything was properly covered and worked diligently. Everything was spotless when he finished, and we’re extremely happy—the bath looks stunning. - David E, Surrey

Very Professional

Ilia delivered excellent results — was efficient, courteous, clean and the job looked brilliant. Would definitely recommend Ilia and Bath Fixer —Sarah W., from Mousehill in Surrey

Timely and Transparent

Outstanding service. Booked on Monday, and Ilia arrived promptly on Wednesday to repair two holes in the tub. Ilia was courteous and highly efficient. The repair is practically invisible thanks to the expert colour matching. No hesitation in recommending Bath Fixer and their brilliant service. — Trent D. in Surrey

Specialist uPVC Door Fixing

At Bath Fixer Mousehill, we recognize the value of keeping up the aesthetic and strength of your vinyl-coated doors.

Our specialized fixing approach includes seamless tone and finish correction, allowing the fixed spots to integrate flawlessly with the rest of the door.

We carefully ready the surface for repairs, meticulously filling and smoothing imperfections.

From minor scuffs to larger cracks and dents, our high-level craftsmanship delivers a budget-friendly, long-lasting, and practical fix to buying a brand-new uPVC door.

Curious to see if we operate in your location?

Explore our location guide or browse through our service areas.

Frequently Asked Questions About Our Services

Resurfacing will very often save you around 60% on the cost of installing a new bathtub.

It’s possible to exchange your vintage enamel bath for a cheaper acrylic alternative, but you will be losing an highly desirable bath for a much lower-quality and less desirable bath.

Yes. Our high-quality formula is suitable for bathtubs, sinks, sink pedestals, and even ceramic surfaces.

We would however recommend that the lavatory is swapped out, because of the regular scrubbing and chemical exposure. Abrasive tools and strong cleaning agents may cause premature deterioration.

It’s possible to reglaze your full bathroom suite with a custom colour.

We primarily encounter cases where repair kits didn’t work well – which may give us a certain perspective – plus, we recognize the superior outcome between DIY solutions and the professional results we deliver.

Some bathroom fixes, like unclogging a drain, can be DIY-friendly, such as unclogging a drain, it’s often wiser to call in the pros.

Our knowledge allows us to identify underlying problems that may not be obvious.

In the production process of cast iron and steel baths, it is coated with an highly resilient and long-lasting layer of enamel.

This hard-glazed enamel surface is thermally bonded to the tub in an intense heating process and forms a strong and glossy finish to leave a smooth glossy surface.

Absolutely! We automatically fix any imperfections as part of the resurfacing process, however, if there are minor surface damage on an otherwise well-maintained bath, we can still help.

Many of our clients reach out to us who have experienced tile breakages, metal plugs, or various tools into the bath and chipped the surface.

If this has happened to you, there’s no need to stress, we can make it look like new again!