Your trusted professionals at Bath Fixer East-Sussex are experts in acrylic bathtub restoration, shower tray refinishing, chip and crack repair for sinks, bath re-enamelling, and resurfacing solid bath fixtures.
Acrylic baths are prone to surface damage and can be affected from impact from loose tiles. Occasionally a shower door to fall and create a surface gouge. The lip on the edge of the bath can snap if it bears too much weight or is leveraged when installing new fixtures. Many times, an bathtub suffers nicks and scratches while stored.
Whatever the situation is, we will probably be able to repair it.
Give us a ring, or submit a service request, or send us pictures via WhatsApp or SMS, and we’ll offer professional recommendations.
Arrive and shield the floor, commode, sink, heaters, and any exposed surfaces.
We professionally clean the surface using industry-approved solutions and eliminate old, degraded sealant.
We repair any damage, such as chips in the bath, cosmetic imperfections, calcium buildup, and faded, thin enamel layers. Should your bathtub have structural issues, we restore it professionally.
We mask off the surrounding tiles, adjacent surfaces, water outlets, bath drain, and bath overflow using protective masking tape to ensure no overspray affects them.
We use a professional-grade cleaning agent to remove oil residues, dirt, impurities and stains.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Following that, we coat the surface with the reinforcing primer using high-temperature application.Where others may stop at one bonding layer, we use two bonding agents, allowing the reglazed bath forms an ultra-durable bond.
We employ an specialized infrared drying technology to ensure a durable, long-lasting finish and clear away all masking materials.
Following this, we perfect the final details, buffing, refining, and perfecting the surface to make sure it’s perfect.
Finally, we apply a high-quality sealing layer so the surface is watertight and secure.
Granite worktops are prone to chipping around the perimeter, as this is the most vulnerable point.
The material is not supported on the open edge, and an impact from a heavy item can clip it and knock a bit off.
- Stubborn Stains on Worktops While these surfaces are built to last, some substances and spills may occasionally cause lasting marks on these surfaces.
- Scratches and Dents Accidental cuts, heavy impacts, or daily use might lead to minor scuffs or dents on the worktop.
- Chipping Worktop edges and corners, if subjected to hard knocks, could break off slightly, disrupting the smooth finish.
