Bath Repair & Bath Resurfacing St-George-in-the-East, Kingston-upon-Thames

Name: Bath Fixer St-George-in-the-East, E1W
Address: St-George-in-the-East, E1W, Kingston-upon-Thames, United Kingdom
Telephone: 0345 017 0787
Price range: ££-£££
Rating: 4.9

Need Bath Repair & Bath Resurfacing Service in St-George-in-the-East, E1W?

Call us
0345 017 0787

Quote Request Form

Affordable Sink Damage Repair St-George-in-the-East

From light wear and tear to a badly deteriorated tub, our experts at Bath Fixer St-George-in-the-East provide a full surface restoration for baths, showers, and sinks and restore old, cracked, or chipped surfaces using a cost-effective solution instead of costly replacements.

Sinks, baths, and shower trays can get chipped or cracked from accidental impacts. These impacts may lead to cracks or chips, but there’s no need for a costly replacement.

Call us
0345 017 0787

How it works

Bath Repair Kingston-upon-Thames

Old enamel baths gradually turn rough and difficult to clean due to wear and tear.

If your bath reaches this stage, it’s time for our expert team at Bath Fixer St-George-in-the-East to carry out our tub refinishing process.

Acrylic baths over time begin to fade, giving your space a dull, worn-out look.

If you’re looking for a full reglazing of your enamel tub or a full resurfacing for an acrylic fixture, trust Bath Fixer St-George-in-the-East to deliver, your beautifully restored bathtub is guaranteed to remain good as ever for many more years.
Our specialists at Bath Fixer St-George-in-the-East are able to revive the aesthetics of your bath for a fraction of the price with our exclusive bathtub refinishing and restoration.

Bath reglazing is an ideal fix for various bath materials, ranging from modern acrylic tubs and traditional enamel-coated bathtubs to cast iron and fibreglass.

Our professional resurfacing system is compatible with all materials, allowing us to carry out work across different bath styles.

Be it repairing acrylic bathtubs to cast iron bath resurfacing, the end product will have your aged tub looking white, bright, and clean.

The Kingston-upon-Thames-wide bathtub refinishing service we offer have enabled homeowners reduce expenses by more than 60% by avoiding a full bathtub installation.

Using our refinishing process, scratches, stains, and dull areas are erased, and coat it with a long-lasting protective layer for an immaculate finish.

Shower Base Refinishing St-George-in-the-East

People frequently select shower trays for their cost-effectiveness and convenience, providing a functional choice for bathroom renovations.

Yet with frequent use, daily use can cause visible damage, leaving them looking worn and hard to clean.

This is where the expertise of Bath Fixer St-George-in-the-East comes into play, helping you avoid unnecessary spending of installing a brand-new shower base.

The skilled professionals at St-George-in-the-East focus on offering trustworthy and prompt solutions, ensuring that your shower trays look as good as new.

Whether it’s scratches, chips, or stains, we have the skills and tools to tackle any issue, giving your shower a smooth, refreshed appearance.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

St-George-in-the-East Acrylic Bathtub Restoration

Bath Fixer Kingston-upon-Thames offer professional services in seamless acrylic bath repairs, shower tray refinishing, seamless sink refinishing, durable bath refinishing, and resurfacing solid bath fixtures.

Acrylic baths are quite soft and are susceptible to damage from impact from loose tiles. At times a glass partition to shift and cause a visible indentation. The rim of the bathtub can break if excessive pressure is applied or experiences force when taking off the bath panel. Often, an bath incurs minor dents in shipping.

Whatever the problem may be, we will probably be able to repair it.

Reach out to us, or fill in an enquiry form, or send us pictures via WhatsApp or SMS, and we’ll offer professional recommendations.

Complete Guide to Bath Re-Enamelling and Resurfacing

Once on-site, our team shield the floor, WC, washbasin, heaters, and major fixtures.

We meticulously scrub the bath using specialized cleaning agents and strip away moldy or damaged silicone.

We handle all bath surface repairs, ranging from chips in the bath, abrasions, limescale, and faded, thin enamel layers. If there are holes or damage at the bottom of the bath, we reinforce and fix it completely.

We cover the tiles, vertical surfaces, faucets, drain opening, and spillover outlet with specialized covering materials to prevent spray getting on these.

We utilize a special cleaning solvent to dissolve and lift oil residues, dust and particles, unwanted residues.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

Following that, we coat the surface with the extra bonding solution using high-temperature application.Where others may stop at one bonding layer, we use two bonding agents, ensuring that the new enamel coating firmly adheres for long-lasting results.

We apply an specialized infrared drying technology to harden and set the fresh enamel coating and take off the protective coverings.

Next, our experts carry out precision finishing, ensuring a flawless, mirror-like finish to make sure it’s perfect.

To complete the process, we add a protective waterproof sealant so your bath is fully usable.

Granite Worktop Chip Repair St-George-in-the-East, Kingston-upon-Thames

Granite worktops can be chipped on their edges, due to their exposed design.

The overhanging edges are particularly susceptible, and a hard object like a pot could result in a noticeable chip.

Stains and Discolouration While these surfaces are built to last, specific liquids and ingredients have the potential to leave stubborn discoloration on these surfaces.
Scratches and Dents Accidental cuts, heavy impacts, or regular wear and tear might lead to light surface marks or shallow marks on the worktop.
Edge Damage The most exposed areas, under sudden pressure, can chip, diminishing its aesthetic appeal.

Get Your Worktop Repaired Today! — Call Us Now!

Speak with the Kingston-upon-Thames professionals for high-quality service at great prices and free tips.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in Kingston-upon-Thames rave about our expert bath repair and bath resurfacing services.

Good communication:

Great communication with a timely arrival. Alex explained everything and then got straight to it. He took great care in masking everything up and worked very hard. He left no mess behind, and we’re very pleased with the final result—the bath looks brand new. - David E, Kingston-upon-Thames

Very Professional

Ilia’s work was outstanding — handled everything with care, professionalism, and delivered stunning results. Highly recommend Ilia and Bath Fixer —Sarah W., St-George-in-the-East, Kingston-upon-Thames

Timely and Transparent

Brilliant service. Booked on Monday, and Ilia arrived promptly on Wednesday to repair two holes in the tub. Ilia was courteous and highly efficient. The colour match is spot on, making the repair virtually invisible. Would not hesitate in recommending both the company & Ilia. — Trent D., Kingston-upon-Thames

Reliable uPVC Door Resurfacing

The team at Bath Fixer St-George-in-the-East, we understand the importance of maintaining the appearance and functionality of your vinyl-coated doors.

Our detailed restoration method utilizes colour and texture matching, so the door retains its original appearance with the rest of the surface.

We carefully ready the surface for repairs, flawlessly restoring damaged spots.

Whether dealing with small marks or significant damage, our expertise delivers a budget-friendly, long-lasting, and practical fix to installing a new door.

Want to check if our services are available near you?

Check out our service area map or see the full list of locations we serve.

Common Questions We Receive About Our Services

Resurfacing will very often save you close to 60% on the cost of replacing your enamel bath.

Of course, you can easily swap your enamel bath for a mass-produced acrylic bath, but you’ll trade off an highly desirable bathtub for a much lower-quality and more fragile bath.

Definitely. Our specialized coating is engineered for use on tubs, washbasins, pedestals, and even wall tiles.

We would however recommend that the lavatory is changed, this is due to the nature of cleaning a toilet. Frequent scrubbing and disinfectants will damage the coating material over time.

You have the option to refinish your full bathroom suite in any finish you desire.

We primarily encounter unsuccessful DIY repair attempts – so we probably have a bias on this point – as we are aware of the quality contrast when comparing a DIY repair kit and the expert finish we provide.

Some bathroom fixes, like unclogging a drain, can be DIY-friendly, such as unclogging a drain, most are best left to professionals.

That’s because we have the experience to spot deeper concerns that could go unnoticed.

In the production process of cast iron and steel baths, it is finished with an exceptionally tough and robust layer of enamel.

This specialized enamel finish is thermally bonded to the tub under very high temperatures and solidifies as it cools to ensure a flawless, mirror-like finish.

Definitely! We handle any imperfections as part of the bath refinishing procedure, but if you have small chips or damage on an otherwise intact bathtub, we can still help.

Many of our clients reach out to us who have accidentally knocked tiles, metal plugs, or various tools into the bath and left noticeable marks.

Should this occur, rest assured, our team can restore it seamlessly!