From light wear and tear to a heavily scratched or cracked bath, our experts at Bath Fixer Stoughton are equipped to perform a professional chip repair for sinks, showers, and baths and bring back the original beauty of any damaged surface using a economical way to avoid full bathtub replacement.
Bathroom fixtures like basins, bathtubs, and shower trays are often damaged when things are dropped onto them. These impacts may lead to cracks or chips, but there’s no need for a costly replacement.
We have years of experience in hard surface repairs and specialize in:
Basin Repairs
Wood Flooring Repair
Cabinet Repair
Laminate & Veneer Repair
Wooden Frames Repair
The Bath Fixer Difference
Bath Fixer professionals are qualified to carry out professional damage repair solutions for doors, floors, kitchen and bathroom countertops, baths, shower trays, tiles, UPVC and wooden window frames, furniture, and a wide range of other surfaces in the PO18 region.
Bath Resurfacing West-Sussex
Vintage enamel tubs can become rough and difficult to clean over time.
When this happens, it’s time for the professionals at Bath Fixer Stoughton to carry out our enamel restoration treatment.
Modern acrylic tubs as they age start to discolour, reducing the aesthetic appeal of your bath.
No matter if you require an enamel bathtub refinishing or an acrylic bath repair, the resurfacing experts at Bath Fixer Stoughton, your like-new bath surface is guaranteed to remain in excellent condition for a long time.
The professionals at Bath Fixer Stoughton can restore the aesthetics of your bathtub for a fraction of the price with our high-quality professional resurfacing solutions.
Resurfacing is a perfect solution for a wide range of tubs, including lightweight acrylic baths and enamel-finished tubs to classic cast iron tubs and reinforced fiberglass baths.
Our specialist process is suitable for any bath type, so we can resurface and reglaze across different bath styles.
Be it repairing acrylic bathtubs to refinishing cast iron bathtubs, the end product will have your worn-out bathtub looking like new again.
The West-Sussex-wide bathtub refinishing service we offer have enabled homeowners spend less than 40% compared to buying a new one by avoiding a full bathtub installation.
Using our refinishing process, scratches, stains, and dull areas are erased, and seal it with a high-quality enamel finish for an ultra-smooth surface.
Shower Tray Repair and Resurfacing Stoughton
People frequently select shower trays for their affordability and ease of installation, serving as a efficient solution for space-conscious bathrooms.
But as the years go by, daily use can cause visible damage, making them look outdated and requiring extra effort for upkeep.
That’s when Bath Fixer Stoughton steps in, helping you avoid unnecessary spending of undergoing a full shower tray replacement.
The skilled professionals at Stoughton focus on offering reliable and efficient service, ensuring that your shower trays regain their original shine.
No matter the level of wear and tear, our team possesses the expertise and equipment to repair and resurface any imperfections, leaving your shower trays looking shiny and brand new.
What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.
FREE Quote
Request Form
Expert Acrylic Bath Resurfacing Stoughton
Our team at Bath Fixer West-Sussex are specialists in bath repair for acrylic surfaces, fixing cracks and damage in shower trays, seamless sink refinishing, durable bath refinishing, and fixing wear and tear on hard surfaces.
Acrylic baths are prone to surface damage and may incur damage from accidents during bathroom renovations. It’s not uncommon for a shower guard to dislodge and cause a visible indentation. The bath’s edge can fracture if too much weight is put on it or is impacted when adjusting surrounding tiles. Frequently, an bath incurs minor dents in shipping.
If your bath is chipped, cracked, or damaged, our experts can likely restore it.
Get in touch by phone, or submit a service request, or send us pictures via WhatsApp or SMS, and our team will provide expert guidance.
Bath Re-Enamelling and Bath Resurfacing Full Step-by-Step Procedure
Arrive and lay protective sheets on the bathroom floor, lavatory, basin, heating units, and any exposed surfaces.
We thoroughly clean the bath with specific cleaners and eliminate old, degraded sealant.
We handle all bath surface repairs, including small fractures and surface chips, surface marks, mineral deposits, and worn away enamel from hard water. If there are holes or damage at the bottom of the bath, we repair that also.
We mask off the bathroom tiles, adjacent surfaces, water outlets, drain area, and overflow drain with specialized covering materials to avoid any coating residue.
We utilize a professional-grade cleaning agent to remove grimy deposits, accumulated grime, any remaining debris.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Then we spray on the additional adhesion layer through heat-assisted bonding.Unlike other bath re-enamelling companies, we reinforce the bond with a second primer, allowing the reglazed bath firmly adheres for long-lasting results.
We apply an professional-grade heat-curing process to harden and set the fresh enamel coating and take off the protective coverings.
Next, our experts carry out precision finishing, polishing, etc. to achieve an impeccable result.
As a finishing step, we seal with a new bead of sealant so the surface is watertight and secure.
Stone work surfaces can be chipped at the corners, since this is where they are weakest.
The unsupported edges make them more fragile, and a hard object like a pot might lead to minor surface damage.
Persistent Marks and Discoloration While these surfaces are built to last, specific liquids and ingredients might result in deep-set stains on these surfaces.
Scratches and Dents Minor surface abrasions, dropped objects, or constant usage may cause faint abrasions or dents on the worktop.
Chipping Perimeter sections, if subjected to hard knocks, can chip, disrupting the smooth finish.
Don’t Wait, Repair Your Worktop Now! — Get in Touch!
Reach out to the West-Sussex team for high-quality service at great prices and expert advice.
Hundreds of satisfied clients in West-Sussex rave about our expert bath repair and bath resurfacing
services.
Good communication:
Good communication and a prompt arrival.
Alex made sure I understood the process before starting.
He was meticulous in masking up and put in a lot of effort.
He left everywhere clean and tidy and we are very happy with the result, the bath looks great.
- David E, West-Sussex
Very Professional
Ilia delivered excellent results — was meticulous, friendly, and ensured a perfect finish.
Wouldn’t hesitate to recommend Bath Fixer and Ilia
—Sarah W., Stoughton, West-Sussex
Timely and Transparent
Fantastic workmanship.
Scheduled on Monday, and Ilia showed up on time Wednesday to restore my damaged acrylic bath.
Polite, prompt, and professional service throughout.
The colour match is spot on, making the repair virtually invisible.
Would definitely suggest Bath Fixer and Ilia for any repairs.
— Trent D. – West-Sussex
Professional uPVC Door Restoration
The team at Bath Fixer Stoughton, we know how crucial it is to keeping up the aesthetic and strength of your uPVC doors.
Our detailed restoration method includes accurate shade and texture adjustment, allowing the fixed spots to integrate flawlessly with the rest of the structure.
We thoroughly treat and prime the affected section, precisely correcting chips and dents.
Handling both light blemishes and major breaks, our high-level craftsmanship ensures a money-saving, green, and efficient repair option to door replacement.
Wondering if we cover your area?
Explore our location guide or review the regions we operate in.
Common Questions We Receive About Our Services
Refinishing your bath can typically save you around 60% on the cost of installing a new bathtub.
Of course, you can easily swap your high-quality enamel bathtub for a mass-produced acrylic bath, but this means sacrificing an valuable and timeless item for a far inferior and lower-value bath.
Absolutely. Our material is engineered for use on bathtubs, sinks, sink pedestals, and even wall tiles.
Although, we do recommend that the toilet is changed, this is due to the nature of cleaning a toilet. Toilet brushes and harsh cleaners can wear down the resurfacing layer.
You can resurface your complete set of fixtures with a custom colour.
Our experience is mostly with cases where repair kits didn’t work well – so we probably have a bias on this point – also, we know the difference in quality when looking at at-home kits and what we can achieve.
Although certain minor bathroom problems can be handled yourself, such as unclogging a drain, most are best left to professionals.
With our trained eye, we to spot deeper concerns that could go unnoticed.
When a cast iron or pressed steel bath is made, it is protected by an extremely hard and durable layer of enamel.
This protective enamel layer is actually melted onto the bath in an intense heating process and forms a strong and glossy finish to leave a smooth glossy surface.
Yes, it is. We will routinely repair any cracks or chips as part of the restoration treatment, however, if there are tiny blemishes on an otherwise undamaged enamel, our experts can repair it.
Many of our clients reach out to us who have accidentally knocked tiles, solid fixtures, or various tools into the bath and chipped the surface.
Should this occur, rest assured, we can fix it quickly!
Enquire about Availability and Get a Quote
Reach out to The Bath Fixer today for a complimentary price estimate and to confirm scheduling options.
