Bath Fixer Surrey specialists specialize in acrylic bath repair, acrylic shower tray repair, ceramic sink repair, professional bath resurfacing, and damage repair for solid surfaces.
Acrylic tubs are relatively delicate and are susceptible to damage from dropped tiles while tiling. Occasionally a glass partition to shift and leave a deep mark. The acrylic border can be split if excessive pressure is applied or is stressed when taking off the bath panel. In several instances, an bathtub suffers nicks and scratches while stored.
Whatever the problem may be, our experts can likely restore it.
Reach out to us, or fill in an enquiry form, or send us pictures via WhatsApp or SMS, and we’ll offer professional recommendations.
Once on-site, our team cover the floor, commode, basin, heating units, and any exposed surfaces.
We thoroughly clean the bath using industry-approved solutions and get rid of deteriorated caulking around the tub.
Our experts fix all types of damage, including chips in the bath, cosmetic imperfections, hard water stains, and faded, thin enamel layers. For major wear and damage on the tub’s bottom, we restore it professionally.
We safeguard the wall tiles, walls, water outlets, drain area, and overflow using protective masking tape to avoid any coating residue.
We use a special cleaning solvent to dissolve and lift oil residues, dirt, etc..
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Next, we apply the second bonding agent using high-temperature application.In contrast to many resurfacing services, we use two bonding agents, allowing the reglazed bath remains securely attached for years to come.
Our team utilizes an infrared low-bake system to bond the refinished surface and remove the masking.
Next, our experts carry out precision finishing, bringing out a smooth, high-gloss effect to deliver a pristine, professional-grade outcome.
As a finishing step, we seal with a protective waterproof sealant so it is ready for use.
Stone work surfaces can suffer minor damage along the edges, because this area lacks structural support.
The material is not supported on the open edge, and a dropped pan or utensil may cause a small section to break away.
- Stubborn Stains on Worktops Although they are stain-resistant, some substances and spills can sometimes leave persistent stains on these surfaces.
- Chips, Scratches, and Dents Unexpected nicks, strong collisions, or constant usage could create light surface marks or dents on the worktop.
- Surface Chips The most exposed areas, under sudden pressure, may sustain chips, compromising the worktop’s seamless look.
