Name: Bath Fixer Townsend, RG26
Address: Townsend, RG26, Hampshire, United Kingdom
Telephone: 0345 017 0787
Price range: ££-£££
Rating: 4.9

Cost Effective Sink Damage Repair Townsend

No matter if it's a slight blemish or a heavily scratched or cracked bath, our experts at Bath Fixer Townsend specialize in a full surface restoration for baths, showers, and sinks and restore worn-out bathroom fixtures with a affordable way to avoid full bathtub replacement.

Bathroom fixtures like basins, bathtubs, and shower trays are often damaged because of heavy objects falling. This can cause the surface to crack or chip, but that doesn’t mean you need a full replacement.

Call us
0345 017 0787

How it works

Bath Resurfacing Hampshire

Old enamel baths tend to become coarse and hard to maintain over time.

If your bath reaches this stage, it’s time for Bath Fixer Townsend’s specialists to conduct our bath resurfacing service.

Plastic-based bathtubs with frequent use start to discolour, reducing the aesthetic appeal of your bath.

No matter if you require an enamel bath resurface or a full resurfacing for an acrylic fixture, our team at Bath Fixer Townsend, your sparkling newly resurfaced bath is ensured to stay flawless with lasting durability.
The Bath Fixer Townsend team can rejuvenate the aesthetics of your bath for much less than replacement with our exclusive bathtub refinishing and restoration.

Our restoration process is the best choice for a wide range of tubs, ranging from acrylic and enamel to cast iron and fibreglass.

Our professional resurfacing system is suitable for any bath type, ensuring we can refinish and fix all types of tubs and fixtures.

For acrylic tub restoration to re-enamelling vintage cast iron tubs, the end product will have your worn-out bathtub looking white, bright, and clean.

Our bath repair and resurfacing service in Hampshire have saved our clients spend less than 40% compared to buying a new one instead of purchasing a brand-new bath.

With resurfacing, all marks and imperfections are removed, and seal it with a high-quality enamel finish for an flawless, showroom-quality result.

Shower Tray Resurfacing Townsend

People frequently select shower trays for their affordability and practicality, delivering a practical option for bathroom design.

Yet with frequent use, wear and tear can take its toll, leaving them looking worn and difficult to maintain.

That’s when Bath Fixer Townsend steps in, eliminating the need for a pricey replacement of buying an entirely new shower tray.

The trusted experts at Townsend focus on offering high-quality and dependable repairs, guaranteeing that your shower surface return to pristine condition.

From minor scratches to deep chips and stubborn stains, we come fully prepared with the right techniques to handle all types of damage, leaving your shower trays looking shiny and brand new.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

Acrylic Tub Repair in Townsend

The experts at Bath Fixer Hampshire specialize in bath repair for acrylic surfaces, restoring acrylic shower trays, seamless sink refinishing, bath re-enamelling, and fixing wear and tear on hard surfaces.

Acrylic tubs are relatively delicate and can be affected from dropped tiles while tiling. Sometimes a glass partition to shift and create a surface gouge. The bath’s edge can snap if excessive pressure is applied or experiences force when installing new fixtures. Frequently, an acrylic bath can be damaged in storage or transit.

Regardless of the issue, we can provide a professional solution.

Reach out to us, or complete our online contact form, or message us with a few photos, and our team will provide expert guidance.

Bath Re-Enamelling and Bath Resurfacing Full Step-by-Step Procedure

Once on-site, our team shield the bathroom floor, lavatory, basin, heaters, and all large surface areas.

We professionally clean the surface with specific cleaners and remove any rotten silicone around the bath.

We repair any damage, covering small fractures and surface chips, abrasions, limescale, and worn away enamel from hard water. If there are holes or damage at the bottom of the bath, we repair that also.

We cover the tiles, bathroom walls, faucets, bath drain, and overflow with masking to ensure no overspray affects them.

We utilize a specialized surface cleaner to get rid of any grease, accumulated grime, impurities and stains.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

Following that, we coat the surface with the extra bonding solution with a hot air gun.Where others may stop at one bonding layer, our process includes a double-bonding system, allowing the reglazed bath has a very strong hold to the original surface.

We use an infrared low-bake system to harden and set the fresh enamel coating and unveil the fully restored bath.

After that, we do any detailed finishing touches, bringing out a smooth, high-gloss effect to make sure it’s perfect.

Finally, we apply a protective waterproof sealant so the surface is watertight and secure.

Granite Worktop Chip Repair Townsend, Hampshire

Granite countertops can suffer minor damage at the corners, due to their exposed design.

The unsupported edges make them more fragile, and a forceful hit from cookware could result in a noticeable chip.

Stubborn Stains on Worktops While these surfaces are built to last, various harsh products might result in deep-set stains on these surfaces.
Scuffs and Impact Damage Unexpected nicks, forceful blows, or daily use could create light surface marks or small depressions on the worktop.
Chipping The most exposed areas, when impacted by heavy objects, may sustain chips, affecting its flawless appearance.

Fix Your Worktop Today! — Contact Us Now!

Reach out to the experts at Hampshire for cost-effective solutions and expert advice.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in Hampshire rave about our expert bath repair and bath resurfacing services.

Good communication:

Kept me informed and arrived as scheduled. Alex explained everything and then got straight to it. He protected all surfaces before starting and worked meticulously. He left no mess behind, and we’re very pleased with the final result—the bath looks brand new. - David E, Hampshire

Very Professional

Ilia’s work was outstanding — worked efficiently, was polite, tidy, and the outcome was flawless. Would definitely recommend Ilia and Bath Fixer —Sarah W., Townsend, Hampshire

Timely and Transparent

Outstanding service. Booked on Monday, and Ilia arrived promptly on Wednesday to repair two holes in the tub. The process was seamless, with friendly and efficient service. You can’t even tell there was damage—the colour match is perfect! No hesitation in recommending Bath Fixer and their brilliant service. — Trent D., based in Hampshire

Specialist uPVC Door Fixing

At Bath Fixer Townsend, we recognize the value of ensuring the longevity and condition of your uPVC doors.

Our specialized fixing approach utilizes colour and texture matching, allowing the fixed spots to integrate flawlessly with the rest of the panel.

We carefully ready the surface for repairs, flawlessly restoring damaged spots.

From minor scuffs to larger cracks and dents, our expertise delivers a budget-friendly, long-lasting, and practical fix to door replacement.

Wondering if we cover your area?

Take a look at the map or see the full list of locations we serve.

What Customers Ask Most About Our Services

Refinishing your bath can typically save you approximately 60% on the cost of getting a brand-new enamel tub.

You may choose to switch your enamel bath for a cheaper acrylic alternative, but this means sacrificing an extremely sought-after fixture for a far inferior and less desirable bath.

Definitely. Our specialized coating is formulated to adhere to tubs, sinks, pedestals, and even tiles.

Although, we do recommend that the toilet is replaced, because of the harsh cleaning process. Toilet brushes and harsh cleaners will damage the coating material over time.

You can restore your entire bathroom setup with a custom colour.

We often come across the repair kits that did not produce a satisfactory result – which may give us a certain perspective – as we are aware of the quality contrast when comparing a DIY repair kit and what we can achieve.

While some common bathroom issues are OK to DIY, such as unclogging a drain, most are best left to professionals.

That’s because we have the experience to spot deeper concerns that could go unnoticed.

During the manufacturing of a cast iron or pressed steel bathtub, it is covered in an ultra-strong and wear-resistant layer of enamel.

This protective enamel layer is thermally bonded to the tub through a controlled melting process and solidifies as it cools to create a shiny, glass-like effect.

Absolutely! We take care of any imperfections as part of the bath refinishing procedure, yet, if your bath has isolated chips or cracks on an otherwise undamaged enamel, our experts can repair it.

We frequently hear from customers who have had loose tiles fall, heavy drain stoppers, or various tools into the bath and left noticeable marks.

If this is the case, then don’t worry, we can fix it quickly!

Bath Repair & Bath Resurfacing Townsend, Hampshire